Allocations using alloc_page are taking too long for normal MTU, so
use LPE only for jumbo frames.

Signed-off-bu: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

Threshold bitmasks for prefetch, host and writeback were clearing
bits that they were not supposed to. The leftmost 2 bits in the byte
for each threshold are reserved.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

Exclude 82542 when setting up WoL. This card does not do WoL at all.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

The MANC register should not be read for PCI-E adapters at all, as well as
82543 and older where 82543 would master abort when this register was
accessed.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

On Thu, Oct 12, 2006 at 06:22:14PM +1000, David Gibson wrote:
> Your recent ibmveth commit, 751ae21c
> ("fix int rollover panic"), causes a rapid oops on my test machine
> (POWER5 LPAR).
>
> I've bisected it down to that commit, but am still investigating the
> cause of the crash itself.

Found the problem, I believe: an object lesson in the need for great
caution using ++.

[...]
@@ -213,6 +213,7 @@ static void ibmveth_replenish_buffer_poo
 		}

 		free_index = pool->consumer_index++ % pool->size;
+		pool->consumer_index = free_index;
 		index = pool->free_map[free_index];

 		ibmveth_assert(index != IBM_VETH_INVALID_MAP);

Since the ++ is used as post-increment, the increment is not included
in free_index, and so the added line effectively reverts the
increment.  The produced_index side has an analagous bug.

The following change corrects this:

The recent commit 751ae21c introduced
a bug in the producer/consumer index calculation in the ibmveth driver
- incautious use of the post-increment ++ operator resulted in an
increment being immediately reverted.  This patch corrects the logic.

Without this patch, the driver oopses almost immediately after
activation on at least some machines.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

When closing the driver or reinitializing the hardware there is the
usual del_timer() race condition that exists when timers re-add
themselves.  Fix by conversion to del_timer_sync().
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'we21-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp

changes due to qe_lib changes include:

o removed inclusion of platform header file
o removed platform_device code, replaced with of_device
o removed typedefs
o uint -> u32 conversions
o removed following defines:
  QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
  BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
  because they hid sizeof/in_be32/out_be32 operations from the reader.
o removed irrelevant comments, added others to resemble removed BD_ defines
o const'd and uncasted all get_property() assignments

bugfixes, courtesy of Scott Wood, include:

- Read phy_address as a u32, not u8.
- Match on type == "network" as well as compatible == "ucc_geth", as
  device_is_compatible() will only compare up to the length of the
  test string, allowing "ucc_geth_phy" to match as well.
- fixes the MAC setting code in ucc_geth.c.  The old code was overwriting and dereferencing random stack contents.
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The reason sky2 driver was locking up on transmit on the Yukon-FE chipset
is that it was misconfiguring the internal RAM buffer so the transmitter
and receiver were sharing the same space.

The code assumed there was 16K of RAM on Yukon-FE (taken from vendor driver
sk98lin which is even more f*cked up on this). Then it assigned based on that.
The giveaway was that the registers would only hold 9bits so both RX/TX
had 0..1ff for space. It is a wonder it worked at all!

This patch addresses this, and fixes an easily reproducible hang on Transmit.
Only the Yukon-FE chip is Marvell 88E803X (10/100 only) are affected.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

During the handling of the PCI error recovery sequence, the current e1000
driver erroneously blocks a device reset for any but the first PCI
function.  It shouldn't -- this is a cut-n-paste error from a different
driver (which tolerated only one hardware reset per hardware card).
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

- move definition of 'tmc' and 'br' locals closer to usage

- handle clock_rate_calc() error

- propagate errors back to upper level open routine
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new
generic IRQ layer will complain thusly:

No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>)
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@cam.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Remove SUID when splicing into an inode
  [PATCH] Add lockless helpers for remove_suid()
  [PATCH] Introduce generic_file_splice_write_nolock()
  [PATCH] Take i_mutex in splice_from_pipe()

This was apparently missed by the move to the generic IRQ code.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use grep instead of make during interface changes.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

check_perm() does not drop the reference to the module when kzalloc()
failure occurs.
Signed-Off-By: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The loop within ocfs2_zero_extend() can execute for a long time, causing
spurious soft lockup warnings.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The page zeroing code was missing the region between old i_size and new
i_size for those extends that didn't actually require a change in space
allocation.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This was causing some folks to incorrectly get -EBUSY during rename.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch deletes redundant memcmp() while looking up in rb tree.
Signed-off-by: NAkinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix iounmap argument to const volatile.
  [MIPS] Reserve syscall numbers for kexec_load.
  [MIPS] Update tb0287_defconfig
  [MIPS] Update pnx8550-v2pci_defconfig
  [MIPS] Update pnx8500-jbs_defconfig
  [MIPS] More vr41xx pt_regs fixups
  [MIPS] save_context_stack fix
  [MIPS] Use compat_sys_mount.
  [MIPS] Fix O32 personality(2) call with 0xffffffff argument.
  [MIPS] A few more pt_regs fixups.
  [MIPS] Malta: Fix uninitialized regs pointer.
  [MIPS] Delete unneeded pt_regs forward declaration.
  [MIPS] Use kallsyms_lookup_size_offset() instead of kallsyms_lookup()

This reverts commit 4596c75c as
requested by Olaf Hering. It causes compile errors, and says Olaf:

  "This change is also wrong, the autoloading works perfect with 2.6.18,
   no need to add random PCI ids.

   See commit a0245f7a, platform devices
   have now a modalias entry in sysfs.  The network card is not a PCI
   device."
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] api: Select cryptomgr where needed
  [CRYPTO] api: fix crypto_alloc_base() return value

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  [GFS2] gfs2_dir_read_data(): fix uninitialized variable usage
  [GFS2] fs/gfs2/ops_fstype.c:fill_super_meta(): fix NULL dereference
  [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): don't use an uninitialized variable
  [GFS2] fs/gfs2/ops_fstype.c:gfs2_get_sb_meta(): remove unused variable
  [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): remove dead code
  [GFS2] gfs2 endianness bug: be16 assigned to be32 field
  [GFS2] Fix bmap to map extents properly
  [DLM] fix iovec length in recvmsg

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Clean up asm-sparc/elf.h pollution in userspace.
  [SPARC64]: Fix of_ioremap().
  [SPARC64]: Compute dma_end argument to sabre_pbm_init() correctly.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (36 commits)
  [Bluetooth] Fix HID disconnect NULL pointer dereference
  [Bluetooth] Add missing entry for Nokia DTL-4 PCMCIA card
  [Bluetooth] Add support for newer ANYCOM USB dongles
  [NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver.
  [IPV4] inet_peer: Group together avl_left, avl_right, v4daddr to speedup lookups on some CPUS
  [TCP]: One NET_INC_STATS() could be NET_INC_STATS_BH in tcp_v4_err()
  [NETFILTER]: Missing check for CAP_NET_ADMIN in iptables compat layer
  [NETPOLL]: initialize skb for UDP
  [IPV6]: Fix route.c warnings when multiple tables are disabled.
  [TG3]: Bump driver version and release date.
  [TG3]: Add lower bound checks for tx ring size.
  [TG3]: Fix set ring params tx ring size implementation
  [NET]: reduce per cpu ram used for loopback stats
  [IPv6] route: Fix prohibit and blackhole routing decision
  [DECNET]: Fix input routing bug
  [TCP]: Bound TSO defer time
  [IPv4] fib: Remove unused fib_config members
  [IPV6]: Always copy rt->u.dst.error when copying a rt6_info.
  [IPV6]: Make IPV6_SUBTREES depend on IPV6_MULTIPLE_TABLES.
  [IPV6]: Clean up BACKTRACK().
  ...

Fix one more compile breakage caused by the post -rc1 IRQ changes.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is suitable for just about any 2.6 kernel.  It should go in
2.6.19 and 2.6.18.2 and possible even the .17 and .16 stable series.

This is a long standing bug that seems to have only recently become
apparent, presumably due to increasing use of NFS over TCP - many
distros seem to be making it the default.

The SK_CONN bit gets set when a listening socket may be ready
for an accept, just as SK_DATA is set when data may be available.

It is entirely possible for svc_tcp_accept to be called with neither
of these set.  It doesn't happen often but there is a small race in
svc_sock_enqueue as SK_CONN and SK_DATA are tested outside the
spin_lock.  They could be cleared immediately after the test and
before the lock is gained.

This normally shouldn't be a problem.  The sockets are non-blocking so
trying to read() or accept() when ther is nothing to do is not a problem.

However: svc_tcp_recvfrom makes the decision "Should I accept() or
should I read()" based on whether SK_CONN is set or not.  This usually
works but is not safe.  The decision should be based on whether it is
a TCP_LISTEN socket or a TCP_CONNECTED socket.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: <stable@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A disk generated some I/O error, after it, I hitted
J_ASSERT(transaction->t_updates > 0) in journal_stop().

It seems to happened on ext3_truncate() path from stack trace. Then,
maybe the following case may trigger J_ASSERT(transaction->t_updates > 0).

ext3_truncate()
    -> ext3_free_branches()
        -> ext3_journal_test_restart()
	    -> ext3_journal_restart()
                -> journal_restart()
                transaction->t_updates--;
                /* another process aborted journal */
                    -> start_this_handle()
		    returns -EROFS without transaction->t_updates++;

    -> ext3_journal_stop()
        -> journal_stop()
	J_ASSERT(transaction->t_updates > 0)

If journal was aborted in middle of journal_restart(), ext3_truncate()
may trigger J_ASSERT().
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clarify lockorder comments now that sys_msync dropps mmap_sem before
calling do_fsync.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a size check in smi_data_write to prevent possible wrapping problems
with large pos values when calling smi_data_buf_realloc on 32-bit.
Signed-off-by: NDoug Warzecha <Douglas_Warzecha@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These returns should be negative, like the others in this function.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

--=-=-=

 from mm/memory.c:
  1434  static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va)
  1435  {
  1436          /*
  1437           * If the source page was a PFN mapping, we don't have
  1438           * a "struct page" for it. We do a best-effort copy by
  1439           * just copying from the original user address. If that
  1440           * fails, we just zero-fill it. Live with it.
  1441           */
  1442          if (unlikely(!src)) {
  1443                  void *kaddr = kmap_atomic(dst, KM_USER0);
  1444                  void __user *uaddr = (void __user *)(va & PAGE_MASK);
  1445
  1446                  /*
  1447                   * This really shouldn't fail, because the page is there
  1448                   * in the page tables. But it might just be unreadable,
  1449                   * in which case we just give up and fill the result with
  1450                   * zeroes.
  1451                   */
  1452                  if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE))
  1453                          memset(kaddr, 0, PAGE_SIZE);
  1454                  kunmap_atomic(kaddr, KM_USER0);
  #### D-cache have to be flushed here.
  #### It seems it is just forgotten.

  1455                  return;
  1456
  1457          }
  1458          copy_user_highpage(dst, src, va);
  #### Ok here. flush_dcache_page() called from this func if arch need it
  1459  }

Following is the patch  fix this issue:
Signed-off-by: NDmitriy Monakhov <dmonakhov@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixing cpu-hotplug documentation as follows:

 - moving confusing asterisk on additional_cpus descrition
 - fixing some typos
 - unifying indentation for source code and command line example
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.
Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Qooting Adrian:

- net/sunrpc/svc.c uses highest_possible_node_id()

- include/linux/nodemask.h says highest_possible_node_id() is
  out-of-line #if MAX_NUMNODES > 1

- the out-of-line highest_possible_node_id() is in lib/cpumask.c

- lib/Makefile: lib-$(CONFIG_SMP) += cpumask.o
  CONFIG_ARCH_DISCONTIGMEM_ENABLE=y, CONFIG_SMP=n, CONFIG_SUNRPC=y

-> highest_possible_node_id() is used in net/sunrpc/svc.c
   CONFIG_NODES_SHIFT defined and > 0

-> include/linux/numa.h: MAX_NUMNODES > 1

-> compile error

The bug is not present on architectures where ARCH_DISCONTIGMEM_ENABLE
depends on NUMA (but m32r isn't the only affected architecture).

So move the function into page_alloc.c

Cc: Adrian Bunk <bunk@stusta.de>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>