Technically this register is not used on wm8997 however the regmap core
requires a continuous block of IRQs. The simplest solution is just to
add the register.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unrepapre().
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

First spotted pointless (incorrect) indent of 'if (ret)', then double
indentations of a struct attribute 'mask'.  Decided to go through the
whole file and make amendments instead and this is the result.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Some boards with TC6393XB chip require full state restore during system
resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000
tosa is one of them). Failing to do so would result in ohci Oops on
resume due to internal memory contentes being changed. Fail ohci suspend
on tc6393xb is full state restore is required.

Recommended workaround is to unbind tmio-ohci driver before suspend and
rebind it after resume.

Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

MFD core already cares about failing registration. It will remove successfully
registered devices in case of error. Thus, no need to repeatedly call
mfd_remove_devices().

Fixes: 5829e9b6 (mfd: lpc_sch: Accomodate partial population of the MFD devices)
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.

Add parentheses around the mask.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

ab8500_restart is not called from anywhere in the kernel, so drop it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Also rid superfluous gotos and label.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Error check around return value of devm_ioremap is missing. Add the same
to avoid NULL pointer dereference.
Signed-off-by: NPramod Gurav <pramod.gurav@smartplayin.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Commit e7cd1d1e ("mfd: twl4030-power: Add generic reset
configuration") accidentally removed the compatible flag for
"ti,twl4030-power" that should be there as documented in the
binding.

If "ti,twl4030-power" only the poweroff configuration is done
by the driver.

Fixes: e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: N"Dr. H. Nikolaus Schaller" <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fix rts5227&5249 failed send buffer cmd after suspend,
PM_CTRL3 should reset before send any buffer cmd after suspend.
Otherwise, buffer cmd will failed, this will lead resume fail.
Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add information which regulators can be disabled during system suspend.
Suggested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This reverts commit b7cde707
("mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption")

Commit b7cde707 called regulator_suspend_prepare() to prepare the
regulators for a suspend state. But it did from the device pm suspend
handler while the regulator suspend prepare function iterates over all
regulators and not only the one managed by this device so it doesn't
seems to be correct to call it from within a device driver.

It is better to call the regulator suspend prepare/finish functions
from platform code instead so this patch reverts the mentioned commit.
Suggested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add a "maxim,max77693-charger" of_compatible to the mfd_cell so the MFD
child device (the charger) will have its own of_node set. This will be
used by the max77693 charger driver in next patches to obtain battery
configuration from DTS.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This was found whilst running checkpatch.pl on arizona-spi.

WARNING: Missing a blank line after declarations
+       struct arizona *arizona = spi_get_drvdata(spi);
+       arizona_dev_exit(arizona);
Signed-off-by: NWill Sheppard <wsheppard@embedded-bits.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Remove old MAX77693_NUM_IRQ_MUIC_REGS define. Not used anywhere.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip

This patch adds documentation for atmel-hlcdc DT bindings.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: NAnthony Harivel <anthony.harivel@emtrion.de>
Tested-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip

The MFD device provides a regmap and several clocks (those connected
to this hardware block) to its subdevices.

This way concurrent accesses to the iomem range are handled by the regmap
framework, and each subdevice can safely access HLCDC registers.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: NAnthony Harivel <anthony.harivel@emtrion.de>
Tested-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Make sure to always honour multi-function devices registered with
PLATFORM_DEVID_NONE (-1) or PLATFORM_DEVID_AUTO (-2) as id base. In this
case it does not make sense to append the cell id to the mfd-id base and
potentially change the requested behaviour.

Specifically this will allow multi-function devices to be registered
with PLATFORM_DEVID_AUTO while still having non-zero cell ids.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use mfd_add_hotplug_devices() helper to register the subdevices.

Compile-only tested.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use mfd_add_hotplug_devices helper to register the subdevices.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Currently a syscon entity can be only registered directly through a
platform device that binds to a dedicated syscon driver. However in
certain use cases it is desirable to make a device used with another
driver a syscon interface provider.

For example, certain SoCs (e.g. Exynos) contain system controller
blocks which perform various functions such as power domain control,
CPU power management, low power mode control, but in addition contain
certain IP integration glue, such as various signal masks,
coprocessor power control, etc. In such case, there is a need to have
a dedicated driver for such system controller but also share registers
with other drivers. The latter is where the syscon interface is helpful.

In case of DT based platforms, this patch decouples syscon object from
syscon platform driver, and allows to create syscon objects first time
when it is required by calling of syscon_regmap_lookup_by APIs and keep
a list of such syscon objects along with syscon provider device_nodes
and regmap handles.

For non-DT based platforms, this patch keeps syscon platform driver
structure so that syscon can be probed and such non-DT based drivers
can use syscon_regmap_lookup_by_pdev API and access regmap handles.
Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
we can completely remove platform driver of syscon, and keep only helper
functions to get regmap handles.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Suggested-by: NTomasz Figa <tomasz.figa@gmail.com>
Tested-by: NVivek Gautam <gautam.vivek@samsung.com>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch add haptic DT binding documentation and example
to support haptic driver in max77693 Multifunction device.
Signed-off-by: NJaewon Kim <jaewon02.kim@samsung.com>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch add haptic of_compatible in order to use the haptic
device driver using Devicetree.
Signed-off-by: NJaewon Kim <jaewon02.kim@samsung.com>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch add regmap_haptic initialization to use haptic register map
in haptic device driver.
Signed-off-by: NJaewon Kim <jaewon02.kim@samsung.com>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Adds of_compatible strings to mfd_cells for sub devices of the tps65217.
Signed-off-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Merge branches 'ib-mfd-gpio-i2c-3.19', 'ib-mfd-iio-3.19' and 'ib-mfd-regulator-v3.19', tag 'ib-mfd-regulator-clk-v3.19' into ibs-for-mfd-merged

Immutable branch between MFD, Regulator and Clk, due for v3.19

This patch adds the binding documentation for Samsung S2MPS13 PMIC
which is similiar with existing S2MPS14 PMIC. S2MPS13 has the different number
of regulators from S2MPS14 and RTC/Clock is the same with the S2MPS14.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds the support for S2MPS13 PMIC clock which is same with existing
S2MPS14 RTC IP. But, S2MPS13 uses all of clocks (32khz_{ap|bt|cp}).
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NMichael Turquette <mturquette@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds S2MPS13 regulator device to existing S2MPS11 device driver.
The S2MPS13 has just different number of regulators from S2MPS14.
The S2MPS13 regulator device includes LDO[1-40] and BUCK[1-10].
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Acked-by: NMark Brown <broonie@kernel.org>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD
driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/
RTC/CLOCK devices.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Sparse catches a couple endian bugs.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The echo field in dln2_transfer_complete comes directly from an USB
transfer and we should not trust it is valid.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This fixes the following kbuild test robot warning:

>> drivers/i2c/busses/i2c-dln2.c:70:1-4: WARNING: end returns can be simplified if negative or 0 value
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If wait_for_completion_interruptible_timeout returns a positive value
it may be propagated as the return value of _dln2_transfer. This
contradicts the documentation of the function and exposes unnecessary
internals to the callers.

This patch makes sure to set the return value to 0 in that case.
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is no longer needed in that platform driver_register will do it.
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

IRQ numbers in axp20x devices are defined with high-order bit first
in each IRQ enable/status registers. On Intel platforms it is more
common to number IRQs with least significant bit first. Therefore,
sharing IRQ# between the two is very difficult. Since AXP288 is a
customized PMIC for Intel platform and the amount of shared IRQs are
very small, we use separate IRQ numbering. This also fixes collision
and a duplicate in WBTO interrupt.

e.g. For the 16 interrupts controlled in IRQ enabled registers 1 & 2,
on axp20x for ARM, the PMIC local IRQ numbers and register bits are
mapped as:
IRQ#:  0  1  2  3  4  5  6  7      8  9 10 11 12 13 14 15
---------------------------------------------------------
ARM:   7  6  5  4  3  2  1  0      7  6  5  4  3  2  1  0
Intel: 0  1  2  3  4  5  6  7      0  1  2  3  4  5  6  7
Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add the module device id table so that the driver can be automatically
loaded once the platform device is created.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds GPIO and IRQ support for the Diolan DLN-2 GPIO module.

Information about the USB protocol interface can be found in the
Programmer's Reference Manual [1], see section 2.9 for the GPIO
module commands and responses.

[1] https://www.diolan.com/downloads/dln-api-manual.pdfSigned-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds support for the Diolan DLN-2 I2C master module. Due
to hardware limitations it does not support SMBUS quick commands.

Information about the USB protocol interface can be found in the
Programmer's Reference Manual [1], see section 6.2.2 for the I2C
master module commands and responses.

[1] https://www.diolan.com/downloads/dln-api-manual.pdfSigned-off-by: NLaurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Reviewed-by: NJohan Hovold <johan@kernel.org>
[Lee: Fixed some whitespace issues in Kconfig]
Signed-off-by: NLee Jones <lee.jones@linaro.org>