after all, 0 bytes and 0 pages is the same thing...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... i.e. file-dependent and address-dependent checks.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... switch callers.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Recently I'm working on fanotify and found the following strange
behaviors.

I wrote a program to set fanotify_mark on "/tmp/block" and FAN_DENY
all events notified.

fanotify_mask = FAN_ALL_EVENTS | FAN_ALL_PERM_EVENTS | FAN_EVENT_ON_CHILD:
$ cd /tmp/block; cat foo
cat: foo: Operation not permitted

Operation on the file is blocked as expected.

But,

fanotify_mask = FAN_ALL_PERM_EVENTS | FAN_EVENT_ON_CHILD:
$ cd /tmp/block; cat foo
aaa

It's not blocked anymore.  This is confusing behavior.  Also reading
commit "fsnotify: call fsnotify_parent in perm events", it seems like
fsnotify should handle subfiles' perm events as well as the other notify
events.

With this patch, regardless of FAN_ALL_EVENTS set or not:
$ cd /tmp/block; cat foo
cat: foo: Operation not permitted

Operation on the file is now blocked properly.

FS_OPEN_PERM and FS_ACCESS_PERM are not listed on FS_EVENTS_POSS_ON_CHILD.
 Due to fsnotify_inode_watches_children() check, if you only specify only
these events as fsnotify_mask, you don't get subfiles' perm events
notified.

This patch add the events to FS_EVENTS_POSS_ON_CHILD to get them notified
even if only these events are specified to fsnotify_mask.
Signed-off-by: NNaohiro Aota <naota@elisp.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

lglocks and brlocks are currently generated with some complicated macros
in lglock.h.  But there's no reason to not just use common utility
functions and put all the data into a common data structure.

Since there are at least two users it makes sense to share this code in a
library.  This is also easier maintainable than a macro forest.

This will also make it later possible to dynamically allocate lglocks and
also use them in modules (this would both still need some additional, but
now straightforward, code)

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Optimizing the slow paths adds a lot of complexity.  If you need to
grab every lock often, you have other problems.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

pass inode + parent's inode or NULL instead of dentry + bool saying
whether we want the parent or not.

NOTE: that needs ceph fix folded in.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If the EXCHGID4_FLAG_CONFIRMED_R flag is set, the client is in theory
supposed to already know the correct value of the seqid, in which case
RFC5661 states that it should ignore the value returned.

Also ensure that if the sanity check in nfs4_check_cl_exchange_flags
fails, then we must not change the nfs_client fields.

Finally, clean up the code: we don't need to retest the value of
'status' unless it can change.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we destroy our lease on last unmount
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For backward compatibility with nfs-utils.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Weston Andros Adamson <dros@netapp.com>

The tile support for multiple-size huge pages requires tagging
the hugetlb PTE with a "super" bit for PTEs that are multiples of
the basic size of a pagetable span.  To set that bit properly
we need to tweak the PTe in make_huge_pte() based on the vma.

This change provides the API for a subsequent tile-specific
change to use.
Reviewed-by: NHillf Danton <dhillf@gmail.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Some minor inline documentation fixes for gaps resulting from new patches.
Signed-off-by: NSumit Semwal <sumit.semwal@ti.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

The main requirement I have for this interface is for scanning out
using the USB gpu devices. Since these devices have to read the
framebuffer on updates and linearly compress it, using kmaps
is a major overhead for every update.

v2: fix warn issues pointed out by Sylwester Nawrocki.

v3: fix compile !CONFIG_DMA_SHARED_BUFFER and add _GPL for now
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NRob Clark <rob.clark@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

Compared to Rob Clark's RFC I've ditched the prepare/finish hooks
and corresponding ioctls on the dma_buf file. The major reason for
that is that many people seem to be under the impression that this is
also for synchronization with outstanding asynchronous processsing.
I'm pretty massively opposed to this because:

- It boils down reinventing a new rather general-purpose userspace
  synchronization interface. If we look at things like futexes, this
  is hard to get right.
- Furthermore a lot of kernel code has to interact with this
  synchronization primitive. This smells a look like the dri1 hw_lock,
  a horror show I prefer not to reinvent.
- Even more fun is that multiple different subsystems would interact
  here, so we have plenty of opportunities to create funny deadlock
  scenarios.

I think synchronization is a wholesale different problem from data
sharing and should be tackled as an orthogonal problem.

Now we could demand that prepare/finish may only ensure cache
coherency (as Rob intended), but that runs up into the next problem:
We not only need mmap support to facilitate sw-only processing nodes
in a pipeline (without jumping through hoops by importing the dma_buf
into some sw-access only importer), which allows for a nicer
ION->dma-buf upgrade path for existing Android userspace. We also need
mmap support for existing importing subsystems to support existing
userspace libraries. And a loot of these subsystems are expected to
export coherent userspace mappings.

So prepare/finish can only ever be optional and the exporter /needs/
to support coherent mappings. Given that mmap access is always
somewhat fallback-y in nature I've decided to drop this optimization,
instead of just making it optional. If we demonstrate a clear need for
this, supported by benchmark results, we can always add it in again
later as an optional extension.

Other differences compared to Rob's RFC is the above mentioned support
for mapping a dma-buf through facilities provided by the importer.
Which results in mmap support no longer being optional.

Note that this dma-buf mmap patch does _not_ support every possible
insanity an existing subsystem could pull of with mmap: Because it
does not allow to intercept pagefaults and shoot down ptes importing
subsystems can't add some magic of their own at these points (e.g. to
automatically synchronize with outstanding rendering or set up some
special resources). I've done a cursory read through a few mmap
implementions of various subsytems and I'm hopeful that we can avoid
this (and the complexity it'd bring with it).

Additonally I've extended the documentation a bit to explain the hows
and whys of this mmap extension.

In case we ever want to add support for explicitly cache maneged
userspace mmap with a prepare/finish ioctl pair, we could specify that
userspace needs to mmap a different part of the dma_buf, e.g. the
range starting at dma_buf->size up to dma_buf->size*2. This works
because the size of a dma_buf is invariant over it's lifetime. The
exporter would obviously need to fall back to coherent mappings for
both ranges if a legacy clients maps the coherent range and the
architecture cannot suppor conflicting caching policies. Also, this
would obviously be optional and userspace needs to be able to fall
back to coherent mappings.

v2:
- Spelling fixes from Rob Clark.
- Compile fix for !DMA_BUF from Rob Clark.
- Extend commit message to explain how explicitly cache managed mmap
  support could be added later.
- Extend the documentation with implementations notes for exporters
  that need to manually fake coherency.

v3:
- dma_buf pointer initialization goof-up noticed by Rebecca Schultz
  Zavin.

Cc: Rob Clark <rob.clark@linaro.org>
Cc: Rebecca Schultz Zavin <rebecca@android.com>
Acked-by: NRob Clark <rob.clark@linaro.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

This patch adds the BIND_CONN_TO_SESSION operation which is needed for
upcoming SP4_MACH_CRED work and useful for recovering from broken connections
without destroying the session.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We only support one layout type per file system, so one threshold_item4 per
mdsthreshold4.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

And make sure that everything using it explicitly includes
that header file.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UDP stack needs a minimum hash size value for proper operation and also
uses alloc_large_system_hash() for proper NUMA distribution of its hash
tables and automatic sizing depending on available system memory.

On some low memory situations, udp_table_init() must ignore the
alloc_large_system_hash() result and reallocs a bigger memory area.

As we cannot easily free old hash table, we leak it and kmemleak can
issue a warning.

This patch adds a low limit parameter to alloc_large_system_hash() to
solve this problem.

We then specify UDP_HTABLE_SIZE_MIN for UDP/UDPLite hash table
allocation.
Reported-by: NMark Asselstine <mark.asselstine@windriver.com>
Reported-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 211ed865

    "net: delete all instances of special processing for token ring"

removed the define for IPX_FRAME_TR_8022.

While it is unlikely, we can't be 100% sure that there aren't
random userspace consumers of this value, so restore it.

The only instance I could find was in ncpfs-2.2.6, and it was
safe as-is, since it used #ifdef IPX_FRAME_TR_8022 around the
two use cases it had, but there may be other userspace packages
without similar ifdefs.

Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit cb04ff9a ("sched, perf: Use a single
callback into the scheduler").

Before this change was introduced, the process switch worked
like this (wrt. to perf event schedule):

     schedule (prev, next)
       - schedule out all perf events for prev
       - switch to next
       - schedule in all perf events for current (next)

After the commit, the process switch looks like:

     schedule (prev, next)
       - schedule out all perf events for prev
       - schedule in all perf events for (next)
       - switch to next

The problem is, that after we schedule perf events in, the pmu
is enabled and we can receive events even before we make the
switch to next - so "current" still being prev process (event
SAMPLE data are filled based on the value of the "current"
process).

Thats exactly what we see for test__PERF_RECORD test. We receive
SAMPLES with PID of the process that our tracee is scheduled
from.

Discussed with Peter Zijlstra:

 > Bah!, yeah I guess reverting is the right thing for now. Sad
 > though.
 >
 > So by having the two hooks we have a black-spot between them
 > where we receive no events at all, this black-spot covers the
 > hand-over of current and we thus don't receive the 'wrong'
 > events.
 >
 > I rather liked we could do away with both that black-spot and
 > clean up the code a little, but apparently people rely on it.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20120523111302.GC1638@m.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Without it we get:

drivers/mfd/max77693.c: In function ‘max77693_i2c_probe’:
drivers/mfd/max77693.c:157:2: error: implicit declaration of function
‘max77693_irq_init’ [-Werror=implicit-function-declaration]
drivers/mfd/max77693.c: In function ‘max77693_resume’:
drivers/mfd/max77693.c:215:2: error: implicit declaration of function
‘max77693_irq_resume’ [-Werror=implicit-function-declaration]
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_lock’:
drivers/mfd/max77693-irq.c:104:2: error: ‘struct max77693_dev’ has no member
named ‘irqlock’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_sync_unlock’:
drivers/mfd/max77693-irq.c:119:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cache’
drivers/mfd/max77693-irq.c:119:42: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:122:13: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:125:24: error: ‘struct max77693_dev’ has no member
named ‘irqlock’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_mask’:
drivers/mfd/max77693-irq.c:141:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:143:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_unmask’:
drivers/mfd/max77693-irq.c:153:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:155:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_thread’:
drivers/mfd/max77693-irq.c:209:26: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:211:27: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:217:39: error: ‘struct max77693_dev’ has no member
named ‘irq_domain’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_init’:
drivers/mfd/max77693-irq.c:260:2: error: ‘struct max77693_dev’ has no member
named ‘irqlock’
drivers/mfd/max77693-irq.c:268:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:269:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cache’
drivers/mfd/max77693-irq.c:271:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:272:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cache’
drivers/mfd/max77693-irq.c:292:10: error: ‘struct max77693_dev’ has no member
named ‘irq_domain’
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Save the allocated memory to store the parsed device node information
to the global device structure so that sub devices can directly use this
pointer.
In this way, the sub devices does not require to re-allocate the
memory for storing the sub-devices specific device node information.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add resistor-select parameter to the platform data.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Recent removal of Token Ring breaks the build of iproute2.

Even though Token Ring support is gone from the kernel, it is worth
keeping the the definition of the TR ARP type to avoid breaking
userspace programs that use this file.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Save the server major and minor ID results from EXCHANGE_ID, as they
are needed for detecting server trunking.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

"noresvport" and "discrtry" can be passed to nfs_create_rpc_client()
by setting flags in the passed-in nfs_client.  This change makes it
easy to add new flags.

Note that these settings are now "sticky" over the lifetime of a
struct nfs_client, and may even be copied when an nfs_client is
cloned.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: Continue to rationalize the locking in nfs_get_client() by
moving the logic that handles the case where a matching server IP
address is not found.

When we support server trunking detection, client initialization may
return a different nfs_client struct than was passed to it.  Change
the synopsis of the init_client methods to return an nfs_client.

The client initialization logic in nfs_get_client() is not much more
than a wrapper around ->init_client.  It's simpler to keep the little
bits of error handling in the version-specific init_client methods.

No behavior change is expected.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently our NFS client assigns a unique SETCLIENTID boot verifier
for each server IP address it knows about.  It's set to CURRENT_TIME
when the struct nfs_client for that server IP is created.

During the SETCLIENTID operation, our client also presents an
nfs_client_id4 string to servers, as an identifier on which the server
can hang all of this client's NFSv4 state.  Our client's
nfs_client_id4 string is unique for each server IP address.

An NFSv4 server is obligated to wipe all NFSv4 state associated with
an nfs_client_id4 string when the client presents the same
nfs_client_id4 string along with a changed SETCLIENTID boot verifier.

When our client unmounts the last of a server's shares, it destroys
that server's struct nfs_client.  The next time the client mounts that
NFS server, it creates a fresh struct nfs_client with a fresh boot
verifier.  On seeing the fresh verifer, the server wipes any previous
NFSv4 state associated with that nfs_client_id4.

However, NFSv4.1 clients are supposed to present the same
nfs_client_id4 string to all servers.  And, to support Transparent
State Migration, the same nfs_client_id4 string should be presented
to all NFSv4.0 servers so they recognize that migrated state for this
client belongs with state a server may already have for this client.
(This is known as the Uniform Client String model).

If the nfs_client_id4 string is the same but the boot verifier changes
for each server IP address, SETCLIENTID and EXCHANGE_ID operations
from such a client could unintentionally result in a server wiping a
client's previously obtained lease.

Thus, if our NFS client is going to use a fixed nfs_client_id4 string,
either for NFSv4.0 or NFSv4.1 mounts, our NFS client should use a
boot verifier that does not change depending on server IP address.
Replace our current per-nfs_client boot verifier with a per-nfs_net
boot verifier.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up:  When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.

Introduced by commit e50a7a1a "NFS: make NFS client allocated per
network namespace context," Tue Jan 10, 2012.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up:  When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.

Additionally, for consistency, move the impl_id field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.

Introduced by commit 7d2ed9ac "NFSv4: parse and display server
implementation ids," Fri Feb 17, 2012.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up:  When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.

Additionally, for consistency, move the scope field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.

Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April
1 2009.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

fs/nfs/nfs4state.c does not yet have any dprintk() call sites, and I'm
about to introduce some.  We will need a new flag for enabling them.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Right ID of KSZ9021 is 0x00221610.
Because lower 4bit is a revision number, it varies according to a chip.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: David J. Choi <david.choi@micrel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the Texas Instruments INA219 and INA226 power monitors.
Signed-off-by: NLothar Felten <l-felten@ti.com>
[guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data;
 select PGA=8 for INA219]
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

At present reserving the IRLs in the IRQ bitmap in addition to the
dropping of the legacy IRQ pre-allocation prevent IRL IRQs from being
allocated for the x3proto board.

The only reason to permit reservations was to lock down possible hardware
vectors prior to dynamic IRQ scanning, but this doesn't matter much given
that the hardware controller configuration is sorted before we get around
to doing any dynamic IRQ allocation anyways. Beyond that, all of the
tables are __init annotated, so quite a bit more work would need to be
done to support reconfiguring things like IRL controllers on the fly,
much more than would ever make it worth the hassle.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>