If a message comes in and we do not have the client in the table, then
try to load the module supplying that client using MODULE_ALIAS to find
it.

This duplicates the scheme seen in other netlink muxes (eg nfnetlink).
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The RDMA netlink client infrastructure was removed and made obsolete.
The old infrastructure defined struct ibnl_client_cbs. Now that all
uses of this have been updated to the new infrastructure, rename the
struct to be compliant with the current stack naming standards:
struct rdma_nl_cbs.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>

Owner field is not needed to be set because netlink is part of ib_core
which will be unloaded last after all other modules are unloaded.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

RDMA netlink has a complicated infrastructure for dynamically
registering and de-registering netlink clients to the NETLINK_RDMA
group. The complicated portion of this code is not widely used because
2 of the 3 current clients are statically compiled together with
netlink.c. The infrastructure, therefore, is deemed overkill.

Refactor the code to eliminate the dynamically added clients. Now all
clients are pre-registered in a client array at compile time, and at run
time they merely check-in with the infrastructure to pass their callback
table for inclusion in the pre-sized client array.

This also allows for future cleanups and removal of unneeded code in the
iwcm* netlink handler.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NChien Tin Tung <chien.tin.tung@intel.com>

The initial patch for changing the stack to use RoCEv2 GIDs by default
set the CMA_PREFERRED_ROCE_GID_TYPE to an incorrect value.  Instead of
an absolute value, we needed to set the right bit in a bitmask.  Correct
the default setting so we use RoCEv2 by default.

Fixes: 63a5f483 (IB/cma: Set default gid type to RoCEv2)
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>

Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCEv2 is the preferred RDMA protocol for Ethernet link layer because
of its advantages over RoCEv1. For better user experience make it the
default choice for RDMA_CM connections if device/port support it.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Initialize the port_num for iWARP in rdma_init_qp_attr.

Fixes: 5ecce4c9("Check port number supplied by user verbs cmds")
Cc: <stable@vger.kernel.org> # v2.6.14+
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When resolving an IP address that is on the host of the caller the
result from querying the routing table is the loopback device. This is
not a valid response, because it doesn't represent the RDMA device and
the port.

Therefore, callers need to check the resolved device and if it is a
loopback device find an alternative way to resolve it. To avoid this we
make sure that the response from rdma_resolve_ip() will not be the
loopback device.

While that, we fix an static checker warning about dereferencing an
unintitialized pointer using the same solution as in commit abeffce9
("net/mlx5e: Fix a -Wmaybe-uninitialized warning") as a reference.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Commit 9fdca4da (IB/SA: Split struct sa_path_rec based on IB and
ROCE specific fields) moved the service_id to be specific attribute
for IB and OPA SA Path Record, and thus wasn't assigned for RoCE.

This caused to the following kernel panic in the CMA request handler flow:

[   27.074594] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[   27.074731] IP: __radix_tree_lookup+0x1d/0xe0
...
[   27.075356] Workqueue: ib_cm cm_work_handler [ib_cm]
[   27.075401] task: ffff88022e3b8000 task.stack: ffffc90001298000
[   27.075449] RIP: 0010:__radix_tree_lookup+0x1d/0xe0
...
[   27.075979] Call Trace:
[   27.076015]  radix_tree_lookup+0xd/0x10
[   27.076055]  cma_ps_find+0x59/0x70 [rdma_cm]
[   27.076097]  cma_id_from_event+0xd2/0x470 [rdma_cm]
[   27.076144]  ? ib_init_ah_from_path+0x39a/0x590 [ib_core]
[   27.076193]  cma_req_handler+0x25/0x480 [rdma_cm]
[   27.076237]  cm_process_work+0x25/0x120 [ib_cm]
[   27.076280]  ? cm_get_bth_pkey.isra.62+0x3c/0xa0 [ib_cm]
[   27.076350]  cm_req_handler+0xb03/0xd40 [ib_cm]
[   27.076430]  ? sched_clock_cpu+0x11/0xb0
[   27.076478]  cm_work_handler+0x194/0x1588 [ib_cm]
[   27.076525]  process_one_work+0x160/0x410
[   27.076565]  worker_thread+0x137/0x4a0
[   27.076614]  kthread+0x112/0x150
[   27.076684]  ? max_active_store+0x60/0x60
[   27.077642]  ? kthread_park+0x90/0x90
[   27.078530]  ret_from_fork+0x2c/0x40

This patch moves it back to the common SA Path Record structure
and removes the redundant setter and getter.

Tested on Connect-IB and Connect-X4 in Infiniband and RoCE respectively.

Fixes: 9fdca4da (IB/SA: Split struct sa_path_rec based on IB ands
	ROCE specific fields)
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

sa_path_rec now contains a union of sa_path_rec_ib and sa_path_rec_roce
based on the type of the path record. Note that fields applicable to
path record type ROCE v1 and ROCE v2 fall under sa_path_rec_roce.
Accessor functions are added to these fields so the caller doesn't have
to know the type.
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

struct sa_path_rec has a gid_type field. This patch introduces a more
generic path record specific type 'rec_type' which is either IB, ROCE v1
or ROCE v2. The patch also provides conversion functions to get
a gid type from a path record type and vice versa
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Rename ib_sa_path_rec to a more generic sa_path_rec.
This is part of extending ib_sa to also support OPA
path records in addition to the IB defined path records.
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current implementation of RDMA_CM sends MRA (Message Receipt
Acknowledgment) only for request messages but not for response messages.

As a result, a slow active side of the connection may send a ready-to-use
message to the passive side in a delay that is too long for the passive
side to wait for.

This patch adds a call to ib_send_cm_mra() upon receiving a response
message and by this tells the other side to modify the service timeout
to a bigger value, 16 times than before. As in the request case, MRA
for reply will be sent only if a duplicate response has arrived.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMatan Barak <matan@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

cma_accept_iw() needs to return an error if conn_params is NULL.
Since this is coming from user space, we can crash.
Reported-by: NShaobo He <shaobo@cs.utah.edu>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The destination address in a listening rdma_id does not have an address
family. Since address family in both sides of a connection must be the
same in rdma_bind_addr() we set the address family of the destination to
the address family of the source.

This patch serves the logic in cma_port_is_unique() which requires to
know if destination address that is associated with a rdma_id is any address
(cma_zero_addr() and cma_loopback_addr()).

This can happen when port reuse is checked for a port number
that is being listened to.

Fixes: 19b752a1 ("IB/cma: Allow port reuse for rdma_id")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add new entry to the RDMA-CM configfs that allows users
to select default TOS for RDMA-CM QPs.

This is useful for users that want to control the TOS for legacy
applications without changing their code.

Application that sets the TOS explicitly using the rdma_set_option
API will continue to work as expected, meaning overriding the configfs
value.

CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch makes use of is_vlan_dev() function instead of flag
comparison which is exactly done by is_vlan_dev() helper function.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NJon Maxwell <jmaxwell37@gmail.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Acked-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This test looks reverted.
We should log an error message only if 'ib_attach_mcast()' fails.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If IPV6 has not been enabled in the underlying kernel, we must avoid
calling IPV6 procedures in rdma_cm.ko.

This requires using "IS_ENABLED(CONFIG_IPV6)" in "if" statements
surrounding any code which calls external IPV6 procedures.

In the instance fixed here, procedure cma_bind_addr() called
ipv6_addr_type() -- which resulted in calling external procedure
__ipv6_addr_type().

Fixes: 6c26a771 ("RDMA/cma: fix IPv6 address resolution")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When allocating a port number for binding to a rdma_id, assuming the
allocation is not for a specific port, the rule is to allow only ports
that were not in use before by any other rdma_id.

This condition is too strong to achieve the goal of a unique 5 tuple
rdma_id. Instead, we can compare current rdma_id with other rdma_id for
difference in one of destination port, source address and destination
address to allow port reuse.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Print debug messages to the kernel log to add more
information about RDMA_CM events that indicate an error.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When we try to resolve a dest addr, if we don't give src addr,
cma core will try to resolve to our source ib device automatically.
The current logic only checks if a given port has the same
subnet_prefix as our dest, which is not enough if we use default
well known subnet_prefix on our active port, as it will be the same
as the subnet_prefix on inactive ports and we might match against
an inactive port by accident.  To resolve this, we should also check
if port is active before we resolve it as a suitable src address for
a given dest.
Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma_consumer_reject_data() will return the private data pointer
and length if any is available.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Return true if the peer consumer application rejected the
connection attempt.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma_reject_msg() returns a pointer to a string message associated with
the transport reject reason codes.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Make struct pernet_operations::id unsigned.

There are 2 reasons to do so:

1)
This field is really an index into an zero based array and
thus is unsigned entity. Using negative value is out-of-bound
access by definition.

2)
On x86_64 unsigned 32-bit data which are mixed with pointers
via array indexing or offsets added or subtracted to pointers
are preffered to signed 32-bit data.

"int" being used as an array index needs to be sign-extended
to 64-bit before being used.

	void f(long *p, int i)
	{
		g(p[i]);
	}

  roughly translates to

	movsx	rsi, esi
	mov	rdi, [rsi+...]
	call 	g

MOVSX is 3 byte instruction which isn't necessary if the variable is
unsigned because x86_64 is zero extending by default.

Now, there is net_generic() function which, you guessed it right, uses
"int" as an array index:

	static inline void *net_generic(const struct net *net, int id)
	{
		...
		ptr = ng->ptr[id - 1];
		...
	}

And this function is used a lot, so those sign extensions add up.

Patch snipes ~1730 bytes on allyesconfig kernel (without all junk
messing with code generation):

	add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)

Unfortunately some functions actually grow bigger.
This is a semmingly random artefact of code generation with register
allocator being used differently. gcc decides that some variable
needs to live in new r8+ registers and every access now requires REX
prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be
used which is longer than [r8]

However, overall balance is in negative direction:

	add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
	function                                     old     new   delta
	nfsd4_lock                                  3886    3959     +73
	tipc_link_build_proto_msg                   1096    1140     +44
	mac80211_hwsim_new_radio                    2776    2808     +32
	tipc_mon_rcv                                1032    1058     +26
	svcauth_gss_legacy_init                     1413    1429     +16
	tipc_bcbase_select_primary                   379     392     +13
	nfsd4_exchange_id                           1247    1260     +13
	nfsd4_setclientid_confirm                    782     793     +11
		...
	put_client_renew_locked                      494     480     -14
	ip_set_sockfn_get                            730     716     -14
	geneve_sock_add                              829     813     -16
	nfsd4_sequence_done                          721     703     -18
	nlmclnt_lookup_host                          708     686     -22
	nfsd4_lockt                                 1085    1063     -22
	nfs_get_client                              1077    1050     -27
	tcf_bpf_init                                1106    1076     -30
	nfsd4_encode_fattr                          5997    5930     -67
	Total: Before=154856051, After=154854321, chg -0.00%
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote:
> From: Mark Bloch <markb@mellanox.com>
>
> If the underlying netowrk type is ipv4 or ipv6 and the device supports
> routable RoCE, prefer it so the traffic could cross subnets.
>
> Signed-off-by: Mark Bloch <markb@mellanox.com>
> Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
> Signed-off-by: Leon Romanovsky <leon@kernel.org>
> ---

Hi Doug,

Please take the following v1 of this patch where I fixed spelling error
from "netowrk" to be "network".

Thanks.

>From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001
From: Mark Bloch <markb@mellanox.com>
Date: Sun, 11 Sep 2016 06:25:10 +0000
Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6
 networks

If the underlying network type is ipv4 or ipv6 and the device supports
routable RoCE, prefer it so the traffic could cross subnets.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some configurations produce this harmless warning when built with gcc
-Wmaybe-uninitialized:

  infiniband/core/cma.c: In function 'cma_get_net_dev':
  infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized]

I previously reported this for the powerpc64 defconfig, but have now
reproduced the same thing for x86 as well, using gcc-5 or higher.

The code looks correct to me, and this change just rearranges it by
making sure we alway initialize the entire address structure to make the
warning disappear.  My first approach added an initialization at the
time of the declaration, which Doug commented may be too costly, so I
hope this version doesn't add overhead.

Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc6/buildall.powerpc.ppc64_defconfig.log.passed
Link: https://patchwork.kernel.org/patch/9212825/Acked-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces
deprecated create_singlethread_workqueue(). This is the identity
conversion.

The workqueue "cma_wq" queues work item cma_work_handler. It has been
identity converted.

WQ_MEM_RECLAIM has been set to ensure forward progress under
memory pressure.
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

'work' and 'route->path_rec' are malloced in cma_resolve_iboe_route()
and should be freed before leaving from the error handling cases,
otherwise it will cause memory leak.

Fixes: 20029832 ('IB/core: Validate route when we init ah')
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Added UCMA and CMA support for multicast join flags. Flags are
passed using UCMA CM join command previously reserved fields.
Currently supporting two join flags indicating two different
multicast JoinStates:

1. Full Member:
   The initiator creates the Multicast group(MCG) if it wasn't
   previously created, can send Multicast messages to the group
   and receive messages from the MCG.

2. Send Only Full Member:
   The initiator creates the Multicast group(MCG) if it wasn't
   previously created, can send Multicast messages to the group
   but doesn't receive any messages from the MCG.

   IB: Send Only Full Member requires a query of ClassPortInfo
       to determine if SM/SA supports this option. If SM/SA
       doesn't support Send-Only there will be no join request
       sent and an error will be returned.

   ETH: When Send Only Full Member is requested no IGMP join
	will be sent.
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Reviewed by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

During multicast join of RoCEv1, IGMP join state and max hop limit
were updated incorrectly. IGMP join should be sent and marked as
joined only on RoCEv2 after a successful join. Max hops should be
updated to the hop limit on RoCEv2 regardless of the join state.

Fixes: bee3c3c9 ('IB/cma: Join and leave multicast groups...')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Static source code analysis tools like smatch cannot handle functions
that lock or not lock a mutex depending on the value of the arguments.
Hence inline the function cma_disable_callback(). Additionally, this
patch realizes a small performance optimization by reducing the number of
mutex_lock() and mutex_unlock() calls in the modified functions. With
this patch applied smatch no longer complains about source file cma.c.
Without this patch smatch reports the following for this source file:

drivers/infiniband/core/cma.c:1959: cma_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'.
  Locked on:   line 1880
               line 1959
  Unlocked on: line 1941
drivers/infiniband/core/cma.c:2112: iw_conn_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'.
  Locked on:   line 2048
  Unlocked on: line 2112
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix array overrun when going over callback table.
In declaration of callback table, the max size isn't provided and
in registration phase, it is provided.

There is potential scenario where a new operation is added
and it is not supported by current client. The acceptance of
such operation by ib_netlink will cause to array overrun.

Fixes: 809d5fc9 ("infiniband: pass rdma_cm module to netlink_dump_start")
Fixes: b493d91d ("iwcm: common code for port mapper")
Fixes: 2ca546b9 ("IB/sa: Route SA pathrecord query through netlink")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>