Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 26 4月, 2008 5 次提交
  3. 25 4月, 2008 1 次提交
  5. 18 4月, 2008 6 次提交
    • B
      ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers · dfd87842
      由 Bartlomiej Zolnierkiewicz 提交于 
      Do explicit port setup in legacy VLB host drivers instead of depending
on init_ide_data().  This way hwif->io_ports[] and hwif->irq are always
correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      dfd87842
    • B
      ide: add ide-4drives host driver (take 3) · ffd4f6f0
      由 Bartlomiej Zolnierkiewicz 提交于 
      CONFIG_BLK_DEV_4DRIVES deserves its own host driver:

* Add drivers/ide/legacy/ide-4drives.c and move "4drives" support there.

* Add ide-4drives.o in the link order after all other legacy host
  drivers enabled by "ide0=" options (they all are mutually exclusive).

* Make ide-4drives host driver probe itself for IDE devices instead of
  indirectly depending on ide_generic host driver.

* Add "probe" module parameter to ide-4drives and update documentation.

v2:
* s/paramater/parameter/ in ide.txt. (Noticed by Randy Dunlap)

v3:
* s/ide_4drives.probe/ide-4drives.probe/ in help entry.
  (Noticed by Sergei Shtylyov)
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      ffd4f6f0
    • B
      ide: remove IDE_*_REG macros · 23579a2a
      由 Bartlomiej Zolnierkiewicz 提交于 
      * Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines.

* Remove IDE_*_REG macros - this results in more readable
  and slightly smaller code.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      23579a2a
    • B
      ide: remove ->hold field from ide_hwif_t (take 2) · 2304dc64
      由 Bartlomiej Zolnierkiewicz 提交于 
      ->hold is write-only now, remove it.

v2:
* v1 missed bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      2304dc64
    • B
      ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls (take 3) · 93de00fd
      由 Bartlomiej Zolnierkiewicz 提交于 
      hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS
and given the number of bugs we can assume that there are no real users:

* DMA has no chance of working because DMA resources are released by
  ide_unregister() and they are never allocated again.

* Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls
  don't work for almost all hosts with "non-standard" (== non ISA-like)
  layout of IDE taskfile registers (there is a lot of such host drivers).

* ide_port_init_devices() is not called when probing IDE devices so:
  - drive->autotune is never set and IDE host/devices are not programmed
    for the correct PIO/DMA transfer modes (=> possible data corruption)
  - host specific I/O 32-bit and IRQ unmasking settings are not applied
    (=> possible data corruption)
  - host specific ->port_init_devs method is not called (=> no luck with
    ht6560b, qd65xx and opti621 host drivers)

* ->rw_disk method is not preserved (=> no HPT3xxN chipsets support).

* ->serialized flag is not preserved (=> possible data corruption when
   using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366
   (HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers).

* ->ack_intr method is not preserved (=> needed by ide-cris, buddha,
  gayle and macide host drivers).

* ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it
  isn't initialized again (SiI3112 support needs them).

* To issue an ioctl() there need to be at least one IDE device present
  in the system.

* ->cable_detect method is not preserved + it is not called when probing
  IDE devices so cable detection is broken (however since DMA support is
  also broken it doesn't really matter ;-).

* Some objects which may have already been freed in ide_unregister()
  are restored by ide_hwif_restore() (i.e. ->hwgroup).

* ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[]
  slot cannot be found.

* When IDE host drivers are modular unregistered port may be re-used by
  different host driver that owned it first causing subtle bugs.

Since we now have a proper warm-plug support remove these ioctls,
then remove no longer needed:
- ide_register_hw() and ide_hwif_restore() functions
- 'init_default' and 'restore' arguments of ide_unregister()
- zeroeing of hwif->{dma,extra}_* fields in ide_unregister()

As an added bonus IDE core code size shrinks by ~3kB (x86-32).

v2:
* fix ide_unregister() arguments in cleanup_module() (Andrew Morton).

v3:
* fix ide_unregister() arguments in palm_bk3710.c.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      93de00fd
    • B
      ide: use ide_find_port() instead of ide_deprecated_find_port() · 4f0eee4d
      由 Bartlomiej Zolnierkiewicz 提交于 
      * Use ide_find_port() instead of ide_deprecated_find_port() in bast-ide/
  palm_bk3710/ide-cs/delkin_cb host drivers and in ide_register_hw().

* Remove no longer needed ide_deprecated_find_port().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      4f0eee4d
  7. 03 4月, 2008 5 次提交
  9. 27 2月, 2008 2 次提交
  11. 19 2月, 2008 4 次提交
  13. 11 2月, 2008 1 次提交
  15. 06 2月, 2008 3 次提交
  17. 03 2月, 2008 9 次提交
  19. 02 2月, 2008 3 次提交
  21. 27 1月, 2008 1 次提交