- 10 1月, 2009 3 次提交
-
-
由 Paul Mackerras 提交于
This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This adds the back-end for the PMU on the PPC970 family. The PPC970 allows events from the ISU to be selected in two different ways. Rather than use alternative event codes to express this, we instead use a single encoding for ISU events and express the resulting constraint (that you can't select events from all three of FPU/IFU/VPU, ISU and IDU/STS at the same time, since they all come in through only 2 multiplexers) using a NAND constraint field, and work out which multiplexer is used for ISU events at compute_mmcr time. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This provides the architecture-specific functions needed to access PMU hardware on the 64-bit PowerPC processors. It has been designed for the IBM POWER family (POWER 4/4+/5/5+/6 and PPC970) but will hopefully also suit other 64-bit PowerPC machines (although probably not Cell given how different it is in this area). This doesn't include back-ends for any specific processors. This implements a system which allows back-ends to express the constraints that their hardware has on what events can be counted simultaneously. The constraints are expressed as a 64-bit mask + 64-bit value for each event, and the encoding is capable of expressing the constraints arising from having a set of multiplexers feeding an event bus, with some events being available through multiple multiplexer settings, such as we get on POWER4 and PPC970. Furthermore, the back-end can supply alternative event codes for each event, and the constraint checking code will try all possible combinations of alternative event codes to try to find a combination that will fit. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 1月, 2009 3 次提交
-
-
由 Paul Mackerras 提交于
Because 64-bit powerpc uses lazy (soft) interrupt disabling, it is possible for a performance monitor exception to come in when the kernel thinks interrupts are disabled (i.e. when they are soft-disabled but hard-enabled). In such a situation the performance monitor exception handler might have some processing to do (such as process wakeups) which can't be done in what is effectively an NMI handler. This provides a way to defer that work until interrupts get enabled, either in raw_local_irq_restore() or by returning from an interrupt handler to code that had interrupts enabled. We have a per-processor flag that indicates that there is work pending to do when interrupts subsequently get re-enabled. This flag is checked in the interrupt return path and in raw_local_irq_restore(), and if it is set, perf_counter_do_pending() is called to do the pending work. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
... with an empty/dummy asm/perf_counter.h so it builds. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Coly Li 提交于
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: NColy Li <coyli@suse.de> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 1月, 2009 34 次提交
-
-
由 Robert Richter 提交于
Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
由 Carl Love 提交于
This patch adds the SPU event based profiling funcitonality for the IBM Cell processor. Previously, the CELL OProfile kernel code supported PPU event, PPU cycle profiling and SPU cycle profiling. The addition of SPU event profiling allows the users to identify where in their SPU code various SPU evnets are occuring. This should help users further identify issues with their code. Note, SPU profiling has some limitations due to HW constraints. Only one event at a time can be used for profiling and SPU event profiling must be time sliced across all of the SPUs in a node. The patch adds a new arch specific file to the OProfile file system. The file has bit 0 set to indicate that the kernel supports SPU event profiling. The user tool must check this file/bit to make sure the kernel supports SPU event profiling before trying to do SPU event profiling. The user tool check is part of the user tool patch for SPU event profiling. Signed-off-by: NCarl Love <carll@us.ibm.com> Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
由 Robert Richter 提交于
Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
由 Carl Love 提交于
This patch restructures and cleans up the code a bit to make it easier to add new functionality later. The patch makes no functional changes to the existing code. Signed-off-by: NCarl Love <carll@us.ibm.com> Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
由 Steven Rostedt 提交于
This patch enables dynamic ftrace. The PowerPC port was dependent on other code not yet in mainline. Now that the code is, we can now let PowerPC compile with dynamic ftrace. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
The clear_fixmap() routine issues map_page() with flags set to 0. Currently this causes a BUG_ON() inside the map_page(), as it assumes that a PTE should be clear before mapping. This patch makes the map_page() to trigger the BUG_ON() only if the flags were set. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
The patch replaces internal registers dump implementation with ppc_save_regs(). From now on PPC64 and PPC32 are using the same code for crash_setup_regs(). NOTE: The old regs dump implementation was capturing SP (r1) directly as is, so you could see crash_kexec() function on top of the back-trace. But ppc_save_regs() goes up one stack frame, so you'll not see it anymore, at the top-level you'll see who actually triggered the crash dump instead. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
The Freescale PowerPC specific gianfar driver (gig-e) uses cacheable_memzero for performance reasons we need to export the symbol to allow the driver to be built as a module. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This is a brown paper bag from one of my earlier patches that breaks build on 40x and 8xx. And yes, I've now added 40x and 8xx to my list of test configs :-) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ingo Molnar 提交于
[Split from a larger patch - sfr] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ingo Molnar 提交于
in/out_be64() work on u64s. The first parameter to ppc_md.ioremap is a phys_addr_t. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ingo Molnar 提交于
Only pass the address of a u64 if that is what the function requires. [Split out of a larger patch - sfr] [update comment - sfr] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ingo Molnar 提交于
tce_entryp is a "u64 *" not an "unsigned long *". [Split from a large patch -sfr] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
of_get_flat_dt_prop() returns a "void *", so we don't need to cast when assigning its result to a pointer variable. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Update ps3vram driver to use the new ps3 three id modalias support. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jim Paris 提交于
Add ps3vram driver, which exposes unused video RAM on the PS3 as a MTD device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. Signed-off-by: NVivien Chappelier <vivien.chappelier@free.fr> Signed-off-by: NJim Paris <jim@jtan.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kamalesh Babulal 提交于
iSeries dependent drivers fail to build, when CONFIG_VIOPATH is disabled. Fix the problem by making those drivers select it. Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mohan Kumar M 提交于
Enable RELOCATABLE option if user selects CRASH_DUMP option. Without this patch user has to first select RELOCATABLE option and then has to enable CRASH_DUMP option. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Liu 提交于
Signed-off-by: NDave Liu <daveliu@freescale.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
So change the flags member of struct spu from u64 to unsigned long. This change will also prevent some warnings when we change u64 to unsigned long long. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Matthias Fuchs 提交于
These ioctls take a struct serial_rs485 (see linux/serial.h) as argument. They are already available on x86. This patch adds them for the powerpc architecture. Signed-off-by: NMatthias Fuchs <mfuchs@ma-fu.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
X has been failing to start on my quad G5 powermac since commit 1fd0f525 ("powerpc: Fix domain numbers in /proc on 64-bit") went in. The reason is that the change allows X to see the PCI-PCI bridge above the video card (previously it was obscured by the fact that there were two "00" directories in /proc/bus/pci), and the pciconfig_iobase system call on the bridge is failing because of a hack that we have to return information about the AGP bus when X asks about bus 0. This machine doesn't have an AGP bus (it has PCI Express) and so the pciconfig_iobase call is returning -1, which ultimately causes X to fail to start. This fixes it by checking that we have an AGP bridge before redirecting the pciconfig_iobase call to return information about the AGP bus. With this, X starts successfully both on a quad G5 with PCI Express and on an older dual G5 with AGP. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Julia Lawall 提交于
SPIN_LOCK_UNLOCKED is deprecated. The following makes the change suggested in Documentation/spinlocks.txt The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ declarer name DEFINE_SPINLOCK; identifier xxx_lock; @@ - spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED; + DEFINE_SPINLOCK(xxx_lock); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Julia Lawall 提交于
SPIN_LOCK_UNLOCKED is deprecated. The following makes the change suggested in Documentation/spinlocks.txt The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ declarer name DEFINE_SPINLOCK; identifier xxx_lock; @@ - spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED; + DEFINE_SPINLOCK(xxx_lock); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nathan Lynch 提交于
The current code for providing processor cache information in sysfs has the following deficiencies: - several complex functions that are hard to understand - implicit recursion (cache_desc_release -> kobject_put -> cache_desc_release) - explicit recursion (create_cache_index_info) - use of two per-cpu arrays when one would suffice - duplication of work on systems where CPUs share cache Also, when I looked at implementing support for a shared_cpu_map attribute, it was pretty much impossible to handle hotplug without checking every single online CPU's cache_desc list and fixing things up... not that this is a hot path, but it would have introduced O(n^2)-ish behavior during boot. Addressing this involved rethinking the core data structures used, which didn't lend itself to an incremental approach. This implementation maintains a "forest" (potentially more than one tree) of cache objects which reflects the system's cache topology. Cache objects are instantiated as needed as CPUs come online. A per-cpu array is used mainly for sysfs-related bookkeeping; the objects in the array just point to the appropriate points in the forest. This maintains compatibility with the existing code and includes some enhancements: - Implement the shared_cpu_map attribute, which is essential for enabling userspace to discover the system's overall cache topology. - Use cache-block-size properties if cache-line-size is not available. I chose to place this implementation in a new file since it would have roughly doubled the size of sysfs.c, which is already kind of messy. Signed-off-by: NNathan Lynch <ntl@pobox.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The non-zero return from the prepare callback is returned by sys_kexec_load() to userspace, indicating that kexec is not supported on the machine. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Grant Likely 提交于
This patch makes the default install script (arch/powerpc/boot/install.sh) copy the bootable image files into the install directory. Before this patch only the vmlinux image file was copied. This patch makes the default 'make install' command useful for embedded development when $(INSTALL_PATH) is set in the environment. As a side effect, this patch changes the calling convention of the install.sh script. Instead of a single 5th parameter, the script is now passed a list of all the target images stored in the $(image-y) Makefile variable. This should be backwards compatible with existing install scripts since it just adds additional arguments and does not change existing ones. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Hansen 提交于
Both users of careful_allocation() immediately memset() the result. So, just do it in one place. Also give careful_allocation() a 'z' prefix to bring it in line with kzmalloc() and friends. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Hansen 提交于
Since we memset() the result in both of the uses here, just make careful_alloc() return a virtual address. Also, add a separate variable to store the physial address that comes back from the lmb_alloc() functions. This makes it less likely that someone will screw it up forgetting to convert before returning since the vaddr is always in a void* and the paddr is always in an unsigned long. I admit this is arbitrary since one of its users needs a paddr and one a vaddr, but it does remove a good number of casts. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Hansen 提交于
If we fail a bootmem allocation, the bootmem code itself panics. No need to redo it here. Also change the wording of the other panic. We don't strictly have to allocate memory on the specified node. It is just a hint and that node may not even *have* any memory on it. In that case we can and do fall back to other nodes. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Hansen 提交于
The behavior in careful_allocation() really confused me at first. Add a comment to hopefully make it easier on the next doofus that looks at it. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nicolas Palix 提交于
This patch fixes some unbalanced OF node references in the powermac code Signed-off-by: NNicolas Palix <npalix@diku.dk> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-