Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The register offset for FW_BLC_SELF is a totally different set of bits
on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like
FW_BLC_SELF on 965G chips.

Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874.

Cc: stable@kernel.org
Tested-by: NNorman Yarvin <yarvin@yarchive.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Gen3 chips have slightly different flip commands, and also contain a bit
that indicates whether a "flip pending" interrupt means the flip has
been queued or has been completed.

So implement support for the gen3 flip command, and make sure we use the
flip pending interrupt correctly depending on the value of ECOSKPD bit
0.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Hardware will set the flip pending ISR bit as soon as it receives the
flip instruction, and (supposedly) clear it once the flip completes
(e.g. at the next vblank).  If we try to send down a flip instruction
while the ISR bit is set, the hardware can become very confused, and we
may never receive the corresponding flip pending interrupt, effectively
hanging the chip.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Enable self-refresh on 945 when just one CRTC is activated.
Otherwise user would get display flicker with dual display.

This fixes https://bugs.freedesktop.org/show_bug.cgi?id=27667Signed-off-by: NLi Peng <peng.li@intel.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This reverts commit cfecde43, since it
seems to cause some systems to not come up with any video output at all
(or video that only comes on when X starts up).

Fixes bugzilla:

    http://bugzilla.kernel.org/show_bug.cgi?id=16163Reported-and-tested-by: NDavid John <davidjon@xenontk.org>
Tested-by: NNick Bowler <nbowler@elliptictech.com>
Acked-by: NCarl Worth <cworth@cworth.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(regression fix since fbdev/kms rework).

My fb rework didn't remember about the 84/65s.
Reported-by: NOndrej Zary <linux@rainbow-software.org>
Tested-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com>
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NArkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: NEric Anholt <eric@anholt.net>

This reverts commit cfecde43.

The commit was first created as an attempt to fix LVDS initialiazation
on Ironlake. Testing revealed that it didn't fix that, but it was
assumed to still be correct anyway.

Subsequent testing has revealed that this commit has caused other
regressions:

  * Change in VBlank interrupt frequency causing 60% 3D performance regression
    http://bugs.freedesktop.org/show_bug.cgi?id=27698

  * Black screen on G45
    http://bugs.freedesktop.org/show_bug.cgi?id=27733

So revert this buggy code for now to revisit later when we can fix
actual bugs without causing these regressions.
Signed-off-by: NCarl Worth <cworth@cworth.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Add the pitch that we about to write into the control register along
with the base, offset and coordinates that go into the other control
registers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

If the FBC is already disabled, then we do not even attempt to disable
FBC and so there is no point emitting a debug statement at that point,
having already emitted one saying why we are disabling FBC.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Delay taking the mutex until we need to and ensure that we hold the
spinlock when resetting unpin_work on the error path. Also defer the
debugging print messages until after we have released the spinlock.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Pineview with DDR3 memory has different latencies to enable CxSR.
This patch updates CxSR latency table to add Pineview DDR3 latency
configuration. It also adds one flag "is_ddr3" for checking DDR3
setting in MCHBAR.

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NLi Peng <peng.li@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

We can, by virtue of a vblank interrupt firing in the middle of setting
up the unpin work (i.e. after we set the unpin_work field and before we
write to the ringbuffer) enter intel_finish_page_flip() prior to
receiving the pending flip notification. Therefore we can expect to hit
intel_finish_page_flip() under normal circumstances without a pending flip
and even without installing the pending_flip_obj. This is exacerbated by
aperture thrashing whilst binding the framebuffer

References:

  Bug 28079 - "glresize" causes kernel panic in intel_finish_page_flip.
  https://bugs.freedesktop.org/show_bug.cgi?id=28079Reported-by: NNick Bowler <nbowler@draconx.ca>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Add power monitoring support to the i915 driver for use by the IPS
driver.  Export the available power info to the IPS driver through a few
new inter-driver hooks.  When used together, the IPS driver and this
patch can significantly increase graphics performance on Ironlake class
chips.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Fixed 32-bit compile.  stupid obfuscating div_u64()]
Signed-off-by: NEric Anholt <eric@anholt.net>

This doesn't change the clock limits (minimums), i.e. it won't make it
output 720x576 PAL nor 720x480 NTSC, but it will work with modes like
1080i etc. (including GLX and textured Xvideo, not sure about the
overlay).

Tested on i915 + analog VGA, it would be worth checking if newer chips
(and which ones) still support interlaced mode.
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NEric Anholt <eric@anholt.net>

FBC disable on 965 can take long enough to trigger latency checks in the
kernel so be sure to timeout after a reasonable period.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15015.
Tested-by: NJames Ettle <theholyettlz@googlemail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Introduces a more complete intel_ring_buffer structure with callbacks
for setup and management of a particular ringbuffer, and converts the
render ring buffer consumers to use it.
Signed-off-by: NZou Nan hai <nanhai.zou@intel.com>
Signed-off-by: NXiang Hai hao <haihao.xiang@intel.com>
[anholt: Fixed up whitespace fail and rebased against prep patches]
Signed-off-by: NEric Anholt <eric@anholt.net>

After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.

v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.

v3: add config lock take inside polling, add intel/nouveau poll init/fini calls

v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.

glisse: discard drm_helper_hpd_irq_event

v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Spatial dither is better than nothing, but ST is even better.

(from ajax's followup message:)
  I noticed this with:

  http://ajax.fedorapeople.org/YellowFlower.jpg

  set as my desktop background in Gnome on a 1280x800 machine (in
  particular, a Sony Vaio VPCB1 with 6-bit panel and a rather bright black
  level).  Easiest way to test this is by poking at PIPEACONF with
  intel_reg_write directly:

  % sudo intel_reg_write 0x70008 0xc0000040 # no dither
  % sudo intel_reg_write 0x70008 0xc0000050 # spatial
  % sudo intel_reg_write 0x70008 0xc0000054 # ST

  I notice it especially strongly in the relatively flat dark area in the
  top left.  Closer than about 18" I can see a noticeable checkerboard
  pattern with plain spatial dithering.  ST smooths that out; I can still
  tell that it's lacking color precision, but it's not offensive.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Just preparation, no functional change.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This should be a small power savings. Tested on Lenovo T410 (Ironlake), LVDS
VGA and DisplayPort, up to 1920x1200R.

v2: Add Sandybridge support, fix obvious math error.
Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

IS_MOBILE() catches 85x, so we'd always try to use the 9xx FIFO sizing;
since there's an explicit 85x version, this seems wrong.

v2: Handle 830m correctly too.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

Update the self-refresh watermark for display plane/cursor and enable
the memory self-refresh on Ironlake. The watermark is also updated for
the active display plane.

More than 1W idle power is saved on one Ironlake laptop after enabling
memory self-refresh.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Previously, after setting up the Pineview CxSR state, i9xx_update_wm would
get called and overwrite our state.

BTW: We will disable the self-refresh and never enable it any more if we
can't find the appropriate the latency on pineview plaftorm. In such case
the update_wm callback will be NULL.

The bitmask macro is also defined to access the corresponding fifo
watermark register.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

SDVO on Ibexpeak PCH with Ironlake is multiplexed with
HDMIB port, and only has SDVOB port.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The existing code handling the DPMS ON event is much more careful to
ensure that these registers are enabled according to strict sequencing
requirements. Enabling these early in mode_set simply defeats that.
Signed-off-by: NCarl Worth <cworth@cworth.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Added by original eDP support patch, not used any more.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

As all display drivers have been converted, remove the left reference
for connector object in old structure.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

DP on Cougarpoint has new training pattern definitions, and
new transcoder DP control register is used to determine the mapping
for transcoder and DP digital output. And eDP for Sandybridge has
new voltage and pre-emphasis level definitions.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Fix the transcoder select bit for LVDS on CPT.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Cougarpoint is the new PCH for Sandybridge CPU. This one resolves the
chipset change for display pipeline compared to previous Ibexpeak PCH.

Sandybridge/Cougarpoint has different FDI training parameters, so this also
makes seperate FDI training functions for IBX and CPT. Other change includes
new transcoder DPLL select function to set which DPLL for transcoder to pick
up.

And with another new transcoder C introduced in Cougarpoint, each connector
has new transcoder select bits. This one adds that change to light up VGA.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Based on a patch by Zhao Yakui.
Signed-off-by: NEric Anholt <eric@anholt.net>

The gen4 docs say it works, so why not.  Tested on Ironlake.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

In load detection, connector's encoder assignment must be kept
consistent for proper mode setting, and this makes connector as
explicit parameter for load detect function to not require single
data structure to hold both encoder and connector reference, ease
the transition for splitted encoder/connector model.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

For introducing splitted encoder/connector structure, this helper will return
connector's attached encoder when needed.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

What we really want is encoder info instead of connector, so change
some more list walk in pipeline setup functions from connector_list
to encoder_list.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>