Patch from Vincent Sanders

This fixes the "multiple definitions of cpufreq_get" build faliure on
the hackkit SA1100 platform.

Signed-off-by: Vincent Sanders
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Vincent Sanders

This fixes the "multiple definitions of cpufreq_get" build faliure on
the Badge4 SA1100 platform.

Signed-off-by: Vincent Sanders
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

current->blocked will be set to the value of current->thread_info->flags if the
cmpxchg to update thread_info->flags fails. For performance reasons the store into
current->blocked was placed in the cmpxchg loop. However, the cmpxchg overwrites the
register holding the value to be stored. In the rare case of a retry the value of
thread_info->flags will be written into current->blocked.

The fix is to use another register so that the register containing the current->blocked
value is not overwritten.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Patch from Dave Neuer

This fixes the "multiple definitions of cpufreq_get" errors on
StrongARM-based iPAQs.

Signed-off-by: Dave Neuer
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the remaining zero byte file left over from the Xscale
fixes.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

ftdi_sio: Avoid losing bytes at tty-ldisc.

This patch was originally developed by Daniel Smertnig.  I
(Ian Abbott) made a few changes.  It has been tested by both
Daniel and I, at least for raw, non-canonical receive data
processing.

Here is Daniel's original description of the patch:

===
During a project in which I was using a FTDI 232BM to
transmit data at relative high speeds (625kBit/s), I
noticed a problem where data was lost even if flow
control was enabled: The FTDI-Driver receives 512 Bytes
of data over USB at a time, which consists of 8 64-Byte
packets. Subtracting the 2 bytes of status information
included in each packet this gives 496 "real" data
bytes per read.

This data is passed (indirectly, via the flip buffers)
to the tty line discipline which takes care of
throttling when there the free buffer space reaches
TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver
processes up to 496 bytes at a time, throttling won't
happen in time and the line discipline will discard the
remaining bytes.

To avoid this the patch passes data in 62-byte blocks
to the tty layer and checks the available space in the
ldisc-buffers. If there isn't enough free space,
processing the rest of the data is delayed using a
workqueue.

Note: The original problem should be easily
reproducible with a userspace program which does slow &
small reads.
===
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NDaniel Smertnig <daniel.smertnig@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This smoothes two imperfections:
- Increase number of LUNs per device from 4 to 9. The best solution
  would be to remove this limit altogether, but that has to wait until
  the time when more than 26 hosts are allowed.
- Replace mdelay with msleep in a probing routine.
Signed-off-by: NPete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here's a patch that fixes up the pci_dev refcounting in the CPCI code.
I've done some testing against it and it seems fine here.
Signed-off-by: NScott Murray <scottm@somanetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Problem:
Incorrect md5sum when using ATAPI PIO mode to verify a distro CD.

Root cause:  sg traverse problem.
In __atapi_pio_bytes(), if qc->cursg++ is increased and "goto
next_page" is executed, then sg is not updated to the new qc->cursg
and the old sg is overwritten with the new data.

Changes:
- Replace "goto next_page" with "goto next_sg" to make sg updated.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>

Correct this.

diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c

This patch fixes some bugs in the ppc64 PER_LINUX32 implementation,
noted by Juergen Kreileder:

* uname(2) doesn't respect PER_LINUX32, it returns 'ppc64' instead of 'ppc'
* Child processes of a PER_LINUX32 process don't inherit PER_LINUX32

Along the way I took the opportunity to move things around so that
sys_ppc32.c only has 32-bit syscall emulation functions and to remove
the obsolete "fakeppc" command line option.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

READA errors failing with EWOULDBLOCK/EAGAIN do not constitute a valid
reason for failing the path; this lead to erratic errors on DM multipath
devices.  This error can be safely propagated upwards without failing the
path.
Acked-by: NKevin Corry <kevcorry@us.ibm.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLars Marowsky-Bree <lmb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There've been reports of problems with CONFIG_PREEMPT=y and the high
floating point partition.  This is caused by the possibility of preemption
and rescheduling on a different processor while saving or restioirng the
high partition.

The only places where the FPU state is touched are in ptrace, in
switch_to(), and where handling a floating-point exception.  In switch_to()
preemption is off.  So it's only in trap.c and ptrace.c that we need to
prevent preemption.

Here is a patch that adds commentary to make the conditions clear, and adds
appropriate preempt_{en,dis}able() calls to make it so.  In trap.c I use
preempt_enable_no_resched(), as we're about to return to user space where
the preemption flag will be checked anyway.
Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove spurious MSR_SE reset during kprobe processing.
single_step_exception() already does it for us.  Reset it to be safe when
executing the fault_handler.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add stricter checks during kprobe registration.  Return correct error value so
insmod doesn't succeed.  Also printk reason for registration failure.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Martin Bligh determined that this patch is causing his test box to not boot.
Revert.

Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/i386/kernel/vsyscall-note.o is not listed as a target so its .cmd file
is neither considered as a target nor is it read on the next build.  This
causes vsyscall-note.o to be rebuilt every time that you run make, which
causes vmlinux to be rebuilt every time.
Signed-off-by: NKeith Owens <kaos@ocs.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The fact that access_ok() doesn't use some of its arguments trips some
unused variable warnings.  This patch silences them permanently.
Signed-off-by: NWilliam Irwin <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6
transition.

Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage
for unified caches") triggered this bug and 405EP boards don't boot
anymore.
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This cleans an error path which used to leak file descriptors by returning
without trying to tidy up.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It turns out that we need to check for pending signals when a newly forked
process is run for the first time.  With strace -f, strace needs to know about
the forked process before it gets going.  If it doesn't, then it ptraces some
bogus values into its registers, and the process segfaults.  So, I added calls
to interrupt_end, which does that, plus checks for reschedules.  There
shouldn't be any of those, but x86 does the same thing, so I'm copying that
behavior to be safe.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a bunch of compile fixes provoked by building UML with gcc 4.  There
are a bunch of signedness mismatches, a couple of uninitialized references,
and a botched C99 structure initialization which had somehow gone unnoticed.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This makes the minimal fixes needed to make the UML iomem driver work in 2.6.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is brought to you by the department of applied stupidity.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds meta collectors for all socket attributes that make sense
to be filtered upon. Some of them are only useful for debugging
but having them doesn't hurt.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spotted by Geert Uytterhoeven <geert@linux-m68k.org>.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changing the sysctl net.core.dev_weight has no effect because the weight
of the backlog devices is set during initialization and never changed.

This patch propagates any changes to the global value affected by sysctl
to the per-cpu devices. It is done every time the packet handler
function is run.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simple interface to allow changing network device scheduling weight
with sysfs. Please consider this for 2.6.12, since risk/impact is small.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGabor Fekete <gfekete@cc.jyu.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix 5700/5701 DMA write corruption on Apple G4 by detecting the Apple
UniNorth PCI 1.5 chipset and adjusting the DMA write boundary to 16. DMA
test fails to detect the problem with this chipset.

Thanks to Manuel Perez Ayala for reporting the problem and helping to
debug it.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

break.b does not store the break number in cr.iim, instead it stores 0,
which makes all break.b instructions look like BUG().  Extract the
break number from the instruction itself.
Signed-off-by: NKeith Owens <kaos@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>