- 13 10月, 2010 2 次提交
-
-
由 Jeff Layton 提交于
Filesystems aren't really supposed to do anything with a vfsmount. It's considered a layering violation since vfsmounts are entirely managed at the VFS layer. CIFS currently keeps an active reference to a vfsmount in order to prevent the superblock vanishing before an oplock break has completed. What we really want to do instead is to keep sb->s_active high until the oplock break has completed. This patch borrows the scheme that NFS uses for handling sillyrenames. An atomic_t is added to the cifs_sb_info. When it transitions from 0 to 1, an extra reference to the superblock is taken (by bumping the s_active value). When it transitions from 1 to 0, that reference is dropped and a the superblock teardown may proceed if there are no more references to it. Also, the vfsmount pointer is removed from cifsFileInfo and from cifs_new_fileinfo, and some bogus forward declarations are removed from cifsfs.h. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifsFileInfo is a bit problematic. It contains a reference back to the struct file itself. This makes it difficult for a cifsFileInfo to exist without a corresponding struct file. It would be better instead of the cifsFileInfo just held info pertaining to the open file on the server instead without any back refrences to the struct file. This would allow it to exist after the filp to which it was originally attached was closed. Much of the use of the file pointer in this struct is to get at the dentry. Begin divorcing the cifsFileInfo from the struct file by keeping a reference to the dentry. Since the dentry will have a reference to the inode, we can eliminate the "pInode" field too and convert the igrab/iput to dget/dput. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 12 10月, 2010 2 次提交
-
-
由 Jeff Layton 提交于
commit 3aa1c8c2 made cifs_getattr set the ownership of files to current_fsuid/current_fsgid when multiuser mounts were in use and when mnt_uid/mnt_gid were non-zero. It should have instead based that decision on the CIFS_MOUNT_OVERR_UID/GID flags. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Shirish Pargaonkar 提交于
CIFS ntlm authentication and signing - Build a proper av/ti pair blob for ntlmv2 without extended security authentication Build an av pair blob as part of ntlmv2 (without extended security) auth request. Include netbios and dns names for domain and server and a timestamp in the blob. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 09 10月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 08 10月, 2010 7 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
find_domain_name() uses load_nls_default which takes a module reference on the appropriate NLS module, but doesn't put it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Create a workqueue job that cleans out unused tlinks. For now, it uses a hardcoded expire time of 10 minutes. When it's done, the work rearms itself. On umount, the work is cancelled before tearing down the tlink tree. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
...when unix extensions aren't enabled. This makes everything on the mount appear to be owned by the current user. This version of the patch differs from previous versions however in that the admin can still force the ownership of all files to appear as a single user via the uid=/gid= options. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
This allows someone to declare a mount as a multiuser mount. Multiuser mounts also imply "noperm" since we want to allow the server to handle permission checking. It also (for now) requires Kerberos authentication. Eventually, we could expand this to other authtypes, but that requires a scheme to allow per-user credential stashing in some form. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
This patch is rather large, but it's a bit difficult to do piecemeal... For non-multiuser mounts, everything will basically work as it does today. A call to cifs_sb_tlink will return the "master" tcon link. Turn the tcon pointer in the cifs_sb into a radix tree that uses the fsuid of the process as a key. The value is a new "tcon_link" struct that contains info about a tcon that's under construction. When a new process needs a tcon, it'll call cifs_sb_tcon. That will then look up the tcon_link in the radix tree. If it exists and is valid, it's returned. If it doesn't exist, then we stuff a new tcon_link into the tree and mark it as pending and then go and try to build the session/tcon. If that works, the tcon pointer in the tcon_link is updated and the pending flag is cleared. If the construction fails, then we set the tcon pointer to an ERR_PTR and clear the pending flag. If the radix tree is searched and the tcon_link is marked pending then we go to sleep and wait for the pending flag to be cleared. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 10月, 2010 5 次提交
-
-
由 Shirish Pargaonkar 提交于
ntlm authentication and signing - Correct response length for ntlmv2 authentication without extended security Fix incorrect calculation of case sensitive response length in the ntlmv2 (without extended security) response. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
...based on CIFS_MOUNT_MULTIUSER flag. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
When we implement multiuser mounts, we'll need to filter filehandles by fsuid. Add a flag for multiuser mounts and code to filter by fsuid when it's set. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifsFileInfo needs a pointer to a tcon, but it doesn't currently hold a reference to it. Change it to keep a pointer to a tcon_link instead and hold a reference to it. That will keep the tcon from being freed until the file is closed. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Eventually, we'll need to track the use of tcons on a per-sb basis, so that we know when it's ok to tear them down. Begin this conversion by adding a new "tcon_link" struct and accessors that get it. For now, the core data structures are untouched -- cifs_sb still just points to a single tcon and the pointers are just cast to deal with the accessor functions. A later patch will flesh this out. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 02 10月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
cifs_reconnect_tcon is called from smb_init. After a successful reconnect, cifs_reconnect_tcon will call reset_cifs_unix_caps. That function will, in turn call CIFSSMBQFSUnixInfo and CIFSSMBSetFSUnixInfo. Those functions also call smb_init. It's possible for the session and tcon reconnect to succeed, and then for another cifs_reconnect to occur before CIFSSMBQFSUnixInfo or CIFSSMBSetFSUnixInfo to be called. That'll cause those functions to call smb_init and cifs_reconnect_tcon again, ad infinitum... Break the infinite recursion by having those functions use a new smb_init variant that doesn't attempt to perform a reconnect. Reported-and-Tested-by: NMichal Suchanek <hramrach@centrum.cz> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 30 9月, 2010 22 次提交
-
-
由 Jeff Layton 提交于
Testing on very recent kernel (2.6.36-rc6) made this warning pop: WARNING: at fs/fs-writeback.c:87 inode_to_bdi+0x65/0x70() Hardware name: Dirtiable inode bdi default != sb bdi cifs ...the following patch fixes it and seems to be the obviously correct thing to do for cifs. Cc: stable@kernel.org Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Get a reference to the file early so we can eventually base the decision about signing on the correct tcon. If that doesn't work for some reason, then fall back to generic_writepages. That's just as likely to fail, but it simplifies the error handling. In truth, I'm not sure how that could occur anyway, so maybe a NULL open_file here ought to be a BUG()? After that, we drop the reference to the open_file and then we re-get one prior to each WriteAndX call. This helps ensure that the filehandle isn't held open any longer than necessary and that open files are reclaimed prior to each write call. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
To minimize calls to cifs_sb_tcon and to allow for a clear error path if a tcon can't be acquired. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
At mount time, we'll always need to create a tcon that will serve as a template for others that are associated with the mount. This tcon is known as the "master" tcon. In some cases, we'll need to use that tcon regardless of who's accessing the mount. Add an accessor function for the master tcon and go ahead and switch the appropriate places to use it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
When we convert cifs to do multiple sessions per mount, we'll need more than one tcon per superblock. At that point "cifs_sb->tcon" will make no sense. Add a new accessor function that gets a tcon given a cifs_sb. For now, it just returns cifs_sb->tcon. Later it'll do more. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
...where it's available and appropriate. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
If registering fs cache failed, we weren't cleaning up proc. Acked-by: NJeff Layton <jlayton@redhat.com> CC: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
We decided not to use connector to do the upcalls so cn_cifs.h is obsolete - remove it. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
With commit 7332f2a6, cifsd will no longer exit when the socket abends and the tcpStatus is CifsNew. With that change, there's no reason to avoid matching an existing session in this state. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Eventually, we'll have more than one tcon per superblock. At that point, we'll need to know which one is associated with a particular fid. For now, this is just set from the cifs_sb->tcon pointer, but eventually the caller of cifs_new_fileinfo will pass a tcon pointer in. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
This is the start for an implementation of "Minshall+French Symlinks" (see http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks). Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
If configured, Minshall+French Symlinks are used against all servers. If the server supports UNIX Extensions, we still create Minshall+French Symlinks on write, but on read we fallback to UNIX Extension symlinks. Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Stefan Metzmacher 提交于
Signed-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Ben Greear 提交于
When using multi-homed machines, it's nice to be able to specify the local IP to use for outbound connections. This patch gives cifs the ability to bind to a particular IP address. Usage: mount -t cifs -o srcaddr=192.168.1.50,user=foo, ... Usage: mount -t cifs -o srcaddr=2002::100:1,user=foo, ... Acked-by: NJeff Layton <jlayton@redhat.com> Acked-by: NDr. David Holder <david.holder@erion.co.uk> Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Shirish Pargaonkar 提交于
Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Shirish Pargaonkar 提交于
Change name of variable mac_key to session key. The reason mac_key was changed to session key is, this structure does not hold message authentication code, it holds the session key (for ntlmv2, ntlmv1 etc.). mac is generated as a signature in cifs_calc* functions. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Suresh Jayaraman 提交于
cifs_new_fileinfo() does not use the 'oplock' value from the callers. Instead, it sets it to REQ_OPLOCK which seems wrong. We should be using the oplock value obtained from the Server to set the inode's clientCanCacheAll or clientCanCacheRead flags. Fix this by passing oplock from the callers to cifs_new_fileinfo(). This change dates back to commit a6ce4932 (2.6.30-rc3). So, all the affected versions will need this fix. Please Cc stable once reviewed and accepted. Cc: Stable <stable@kernel.org> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-