The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken,
and included all the function prologue and epilogue stuff, even though
it was itself then inside a C function where the compiler would add its
own prologue and epilogue on top of it all.

This then just _happened_ to work if you had exactly the right compiler
version and exactly the right compiler flags, so that gcc just happened
to not create any prologue at all (the gcc-generated epilogue wouldn't
matter, since it would never be reached).

But the more proper way to fix it is to simply not do this.  Move the
inline asm to the top level, with no surrounding function at all (the
better alternative would be to remove the prologue and make it actually
use proper description of the arguments to the inline asm, but that's a
bigger change than the one I'm willing to make right now).
Tested-by: NS.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So driver ioctls need a full auditing before we can make this change.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This allows other threads to run when the serial driver polls the CTS
PIN in a loop.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Commit 62c96b9d ("agp/intel: cleanup
some serious whitespace badness") didn't just fix whitespace.  It also
lost two lines.

Noticed by Linus. No more whitespace diffs for me.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

no more whitespace diffs for me.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds missing stolen memory size detect for IGD_GM, be sure to
detect right size as current X intel driver (2.3.2) which has already
worked out.
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

According to the hw guys, you should use DSTCACHE_CTLSTAT to flush
the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes performance drop after suspend/resume on some systems.
Signed-off-by: NDave Airlie <airlied@redhat.com>

AGP registers weren't programmed properly for r500 cards.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Texture uploads could hit the blitter coordinate limit, adjust the texture
offset when uploading the pieces. Make sure to check the end address of the
upload too.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This contains all the command buffer processing for the r500 cards.
It doesn't yet contain vblank support.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This inits the card pipes in the kernel and lets userspace getparam
the correct setup.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cleanup do engine reset for different chip families.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

We only support RS480 (AMD based IGP) at the moment not
RS400 (Intel based IGP) ones.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Docs state bits 4-11 maps to bits 32-39 of the 40-bit range
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds production microcode for r100->r500 from AMD.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Switch to using more correct pci dma mapping interfaces.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Piter PUNK <piterpunk@slackware.com>

SiS AHCIs say they can do PMP but can't and fail detection if SRST w/
pmp==15 is used.  Turn off PMP support.

tj: added patch description, adapted patch to #upstream-fixes and
    renamed board_ahci_sis to board_ahci_nopmp.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add HAVE_PATA_PLATFORM to select the pata platform driver
to ensure that we do not end up with a long 'depends on' list
when other users of this driver turn up.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Chip errata sometimes prevents reliable use of PIO commands which involve
more than a single DRQ (data request).  In normal operation, libata should
not generate such PIO commands (uses DMA instead), but they could be sent
in via SG_IO from userspace.

A full workaround might be to break up such commands into sequences
of single DRQ ones, but that's just way too complex for something
that doesn't normally happen in real life.

So, allow the attempt (it often works, despite the errata),
but log the event for reference when somebody screams.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The early chipsets cannot safely handle Async Notification (AN),
but 6041/6081 chip revision "C0" (and newer) can handle it.

So allow AN for "C0" and higher.

This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

There's no reason to check whether to use DMA or not for no data
commands.  Don't do it.  While at it, make local variable using_pio in
atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename
ata_check_atapi_dma() to atapi_check_dma() for consistency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

JMB361 has only one port but reports it has two causing longish probe
failure on the second one.  Quirk it.

Reported by Gajo Petrovic in bz 10911.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Gajo Petrovic <gajo01@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use boolean in AGP instead of having own TRUE/FALSE

--
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

besides it apparently being useful only in 2.6.24 (the changes in 2.6.25
really mean that it could be converted back to a single-stage mechanism),
I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling
of gart_to_virt() in the second stage invocations of the destroy function.
I think that besides this being a real issue with Xen (where
unmap_page_from_agp() is not just a page table attribute change), this
also is invalid from a theoretical perspective: One should not assume that
gart_to_virt() is still valid after unmapping a page. So minimally (keeping
the 2-stage mechanism) a patch like the one below would be needed.

Jan
Signed-off-by: NDave Airlie <airlied@redhat.com>

add a new PCI ID and remove an old dodgy one, include the explaination
in the commented code so nobody readds later.

(davej also sent the pci id addition).
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event
files") changed the way that closed files are handled in the uverbs
code.  However, after the conversion, is_closed flag is checked
incorrectly in ib_uverbs_async_handler().  As a result, no async
events are ever passed to applications.

Found by: Ronni Zimmerman <ronniz@mellanox.co.il>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Rename and reorder some prompts and modify some help texts.
The result:

  -------------------- IEEE 1394 (FireWire) support --------------------
  *** Enable only one of the two stacks, unless you know what you are doing ***
  New FireWire stack, EXPERIMENTAL
    OHCI-1394 controllers
    Storage devices (SBP-2 protocol)
  Stable FireWire stack
    OHCI-1394 controllers
    PCILynx controller
    Storage devices (SBP-2 protocol)
      Enable replacement for physical DMA in SBP2
    IP over 1394
    raw1394 userspace interface
    video1394 userspace interface
    dv1394 userspace interface (deprecated)
    Excessive debugging output

The old prompts for reference:

  -------------------- IEEE 1394 (FireWire) support --------------------
  IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL
    Support for OHCI FireWire host controllers
    Support for storage devices (SBP-2 protocol driver)
  IEEE 1394 (FireWire) support
    *** Subsystem Options ***
    Excessive debugging output
    *** Controllers ***
    Texas Instruments PCILynx support
    OHCI-1394 support
    *** Protocols ***
    OHCI-1394 Video support
    SBP-2 support (Harddisks etc.)
      Enable replacement for physical DMA in SBP2
    IP over 1394
    OHCI-DV I/O support (deprecated)
    Raw IEEE1394 I/O support
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>