- 24 10月, 2010 2 次提交
-
-
由 Bryan Schumaker 提交于
This patch adds the readdir cache array and functions to retreive the array stored on a cache page, clear the array by freeing allocated memory, add an entry to the array, and search the array for a given cookie. It then modifies readdir to make use of the new cache array. With the new cache array method, we no longer need some of this code. Finally, nfs_llseek_dir() will set file->f_pos to a value greater than 0 and desc->dir_cookie to zero. When we see this, readdir needs to find the file at position file->f_pos from the start of the directory. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If nfs_intent_set_file() returns an error, we usually want to pass that back up the stack. Also ensure that nfs_open_revalidate() returns '1' on success. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 9月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
We may end up removing the current entry from nfs_access_lru_list. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 9月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
...since that's where most of the sillyrenaming code lives. A comment block is added to the beginning as well to clarify how sillyrenaming works. Also, make nfs_async_unlink static as nfs_sillyrename is the only caller. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 9月, 2010 6 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Remove all remaining references to the struct nameidata from the low level NFS layers. Again pass down a partially initialised struct nfs_open_context when we want to do atomic open+create. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Remove references to 'struct nameidata' from the low-level open_revalidate code, and replace them with a struct nfs_open_context which will be correctly initialised upon success. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Start moving the 'struct nameidata' dependent code out of the lower level NFS code in preparation for the removal of open intents. Instead of the struct nameidata, we pass down a partially initialised struct nfs_open_context that will be fully initialised by the atomic open upon success. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 8月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Adam Lackorzynski reports: with 2.6.35.2 I'm getting this reproducible Oops: [ 110.825396] BUG: unable to handle kernel NULL pointer dereference at (null) [ 110.828638] IP: [<ffffffff811247b7>] encode_attrs+0x1a/0x2a4 [ 110.828638] PGD be89f067 PUD bf18f067 PMD 0 [ 110.828638] Oops: 0000 [#1] SMP [ 110.828638] last sysfs file: /sys/class/net/lo/operstate [ 110.828638] CPU 2 [ 110.828638] Modules linked in: rtc_cmos rtc_core rtc_lib amd64_edac_mod i2c_amd756 edac_core i2c_core dm_mirror dm_region_hash dm_log dm_snapshot sg sr_mod usb_storage ohci_hcd mptspi tg3 mptscsih mptbase usbcore nls_base [last unloaded: scsi_wait_scan] [ 110.828638] [ 110.828638] Pid: 11264, comm: setchecksum Not tainted 2.6.35.2 #1 [ 110.828638] RIP: 0010:[<ffffffff811247b7>] [<ffffffff811247b7>] encode_attrs+0x1a/0x2a4 [ 110.828638] RSP: 0000:ffff88003bf5b878 EFLAGS: 00010296 [ 110.828638] RAX: ffff8800bddb48a8 RBX: ffff88003bf5bb18 RCX: 0000000000000000 [ 110.828638] RDX: ffff8800be258800 RSI: 0000000000000000 RDI: ffff88003bf5b9f8 [ 110.828638] RBP: 0000000000000000 R08: ffff8800bddb48a8 R09: 0000000000000004 [ 110.828638] R10: 0000000000000003 R11: ffff8800be779000 R12: ffff8800be258800 [ 110.828638] R13: ffff88003bf5b9f8 R14: ffff88003bf5bb20 R15: ffff8800be258800 [ 110.828638] FS: 0000000000000000(0000) GS:ffff880041e00000(0063) knlGS:00000000556bd6b0 [ 110.828638] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 110.828638] CR2: 0000000000000000 CR3: 00000000be8ef000 CR4: 00000000000006e0 [ 110.828638] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 110.828638] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 110.828638] Process setchecksum (pid: 11264, threadinfo ffff88003bf5a000, task ffff88003f232210) [ 110.828638] Stack: [ 110.828638] 0000000000000000 ffff8800bfbcf920 0000000000000000 0000000000000ffe [ 110.828638] <0> 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 110.828638] <0> 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 110.828638] Call Trace: [ 110.828638] [<ffffffff81124c1f>] ? nfs4_xdr_enc_setattr+0x90/0xb4 [ 110.828638] [<ffffffff81371161>] ? call_transmit+0x1c3/0x24a [ 110.828638] [<ffffffff813774d9>] ? __rpc_execute+0x78/0x22a [ 110.828638] [<ffffffff81371a91>] ? rpc_run_task+0x21/0x2b [ 110.828638] [<ffffffff81371b7e>] ? rpc_call_sync+0x3d/0x5d [ 110.828638] [<ffffffff8111e284>] ? _nfs4_do_setattr+0x11b/0x147 [ 110.828638] [<ffffffff81109466>] ? nfs_init_locked+0x0/0x32 [ 110.828638] [<ffffffff810ac521>] ? ifind+0x4e/0x90 [ 110.828638] [<ffffffff8111e2fb>] ? nfs4_do_setattr+0x4b/0x6e [ 110.828638] [<ffffffff8111e634>] ? nfs4_do_open+0x291/0x3a6 [ 110.828638] [<ffffffff8111ed81>] ? nfs4_open_revalidate+0x63/0x14a [ 110.828638] [<ffffffff811056c4>] ? nfs_open_revalidate+0xd7/0x161 [ 110.828638] [<ffffffff810a2de4>] ? do_lookup+0x1a4/0x201 [ 110.828638] [<ffffffff810a4733>] ? link_path_walk+0x6a/0x9d5 [ 110.828638] [<ffffffff810a42b6>] ? do_last+0x17b/0x58e [ 110.828638] [<ffffffff810a5fbe>] ? do_filp_open+0x1bd/0x56e [ 110.828638] [<ffffffff811cd5e0>] ? _atomic_dec_and_lock+0x30/0x48 [ 110.828638] [<ffffffff810a9b1b>] ? dput+0x37/0x152 [ 110.828638] [<ffffffff810ae063>] ? alloc_fd+0x69/0x10a [ 110.828638] [<ffffffff81099f39>] ? do_sys_open+0x56/0x100 [ 110.828638] [<ffffffff81027a22>] ? ia32_sysret+0x0/0x5 [ 110.828638] Code: 83 f1 01 e8 f5 ca ff ff 48 83 c4 50 5b 5d 41 5c c3 41 57 41 56 41 55 49 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 81 ec 18 01 00 00 <8b> 06 89 c2 83 e2 08 83 fa 01 19 db 83 e3 f8 83 c3 18 a8 01 8d [ 110.828638] RIP [<ffffffff811247b7>] encode_attrs+0x1a/0x2a4 [ 110.828638] RSP <ffff88003bf5b878> [ 110.828638] CR2: 0000000000000000 [ 112.840396] ---[ end trace 95282e83fd77358f ]--- We need to ensure that the O_EXCL flag is turned off if the user doesn't set O_CREAT. Cc: stable@kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 8月, 2010 1 次提交
-
-
由 Neil Brown 提交于
To obey NFS cache semantics, the client must verify the cached attributes when a file is opened. In most cases this is done by a call to d_validate as one of the last steps in path_walk. However for the root of a filesystem, d_validate is only ever called on the mounted-on filesystem (except when the path ends '.' or '..'). So NFS has no chance to validate the attributes. So, in nfs_opendir, we revalidate the attributes if the opened directory is the mountpoint. This may cause double-validation for "." and ".." lookups, but that is better than missing regular /path/name lookups completely. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 8月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
We don't really support nfs servers that invalidate the file handle after a rename, so precautions such as flushing out dirty data before renaming the file are superfluous. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 8月, 2010 1 次提交
-
-
由 Eric Paris 提交于
Currently MAY_ACCESS means that filesystems must check the permissions right then and not rely on cached results or the results of future operations on the object. This can be because of a call to sys_access() or because of a call to chdir() which needs to check search without relying on any future operations inside that dir. I plan to use MAY_ACCESS for other purposes in the security system, so I split the MAY_ACCESS and the MAY_CHDIR cases. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 19 7月, 2010 1 次提交
-
-
由 Dave Chinner 提交于
The current shrinker implementation requires the registered callback to have global state to work from. This makes it difficult to shrink caches that are not global (e.g. per-filesystem caches). Pass the shrinker structure to the callback so that users can embed the shrinker structure in the context the shrinker needs to operate on and get back to it in the callback via container_of(). Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 28 5月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 5月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Commit 9c7e7e23 (NFS: Don't call iput() in nfs_access_cache_shrinker) unintentionally removed the spin unlock for the inode->i_lock. Reported-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 5月, 2010 5 次提交
-
-
由 Trond Myklebust 提交于
iput() can potentially attempt to allocate memory, so we should avoid calling it in a memory shrinker. Instead, rely on the fact that iput() will call nfs_access_zap_cache(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Both iput() and put_rpccred() might allocate memory under certain circumstances, so make sure that we don't recurse and deadlock... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 4月, 2010 1 次提交
-
-
由 Al Viro 提交于
If dentry found stale happens to be a root of disconnected tree, we can't d_drop() it; its d_hash is actually part of s_anon and d_drop() would simply hide it from shrink_dcache_for_umount(), leading to all sorts of fun, including busy inodes on umount and oopsen after that. Bug had been there since at least 2006 (commit c636eb already has it), so it's definitely -stable fodder. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 4月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Fix https://bugzilla.kernel.org/show_bug.cgi?id=15789Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 4月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
- 11 3月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
If the NFS_INO_REVAL_FORCED flag is set, that means that we don't yet have an up to date attribute cache. Even if we hold a delegation, we must put a GETATTR on the wire. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
- 06 3月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 1月, 2010 1 次提交
-
-
由 OGAWA Hirofumi 提交于
Recent change is missing to update "rehash". With that change, it will become the cause of adding dentry to hash twice. This explains the reason of Oops (dereference the freed dentry in __d_lookup()) on my machine. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: NMarvin <marvin24@gmx.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 12月, 2009 4 次提交
-
-
由 Miklos Szeredi 提交于
The d_instantiate(new_dentry, NULL) is superfluous, the dentry is already negative. Rehashing this dummy dentry isn't needed either, d_move() works fine on an unhashed target. The re-checking for busy after a failed nfs_sillyrename() is bogus too: new_dentry->d_count < 2 would be a bug here. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Miklos Szeredi 提交于
Move unhashing the target to after the check for existence and being a non-directory. If renaming a directory then the VFS already unhashes the target if it is not busy. If it's busy then acquiring more references during the rename makes no difference. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Miklos Szeredi 提交于
Comments are wrong or out of date. In particular d_drop() doesn't free the inode it just unhashes the dentry. And if target is a directory then it is not checked for being busy. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Miklos Szeredi 提交于
VFS already checks if both source and target are directories. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 10月, 2009 1 次提交
-
-
由 Trond Myklebust 提交于
Otherwise, we have to wait for the server to recall it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 7月, 2009 1 次提交
-
-
由 Trond Myklebust 提交于
We just had a case in which a buggy server occasionally returns the wrong attributes during an OPEN call. While the client does catch this sort of condition in nfs4_open_done(), and causes the nfs4_atomic_open() to return -EISDIR, the logic in nfs_atomic_lookup() is broken, since it causes a fallback to an ordinary lookup instead of just returning the error. When the buggy server then returns a regular file for the fallback lookup, the VFS allows the open, and bad things start to happen, since the open file doesn't have any associated NFSv4 state. The fix is firstly to return the EISDIR/ENOTDIR errors immediately, and secondly to ensure that we are always careful when dereferencing the nfs_open_context state pointer. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 5月, 2009 1 次提交
-
-
由 Frank Filz 提交于
The problem is that permission checking is skipped if atomic open is possible, but when exec opens a file, it just opens it O_READONLY which means EXEC permission will not be checked at that time. This problem is observed by the following sequence (executed as root): mount -t nfs4 server:/ /mnt4 echo "ls" >/mnt4/foo chmod 744 /mnt4/foo su guest -c "mnt4/foo" Signed-off-by: NFrank Filz <ffilzlnx@us.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Tested-by: NEugene Teo <eugeneteo@kernel.sg> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 3月, 2009 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 3月, 2009 1 次提交
-
-
由 Trond Myklebust 提交于
NFS appears to be returning an unnecessary "delete" notification when we're doing an atomic rename. See http://bugzilla.gnome.org/show_bug.cgi?id=575684 The fix is to get rid of the redundant call to d_delete(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 3月, 2009 1 次提交
-
-
由 Suresh Jayaraman 提交于
Hi Trond, I have been looking at a bugreport where trying to open applications on KDE on a NFS mounted home fails temporarily. There have been multiple reports on different kernel versions pointing to this common issue: http://bugzilla.kernel.org/show_bug.cgi?id=12557 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/269954 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508866.html This issue can be reproducible consistently by doing this on a NFS mounted home (KDE): 1. Open 2 xterm sessions 2. From one of the xterm session, do "ssh -X <remote host>" 3. "stat ~/.Xauthority" on the remote SSH session 4. Close the two xterm sessions 5. On the server do a "stat ~/.Xauthority" 6. Now on the client, try to open xterm This will fail. Even if the filehandle had become stale, the NFS client should invalidate the cache/inode and should repeat LOOKUP. Looking at the packet capture when the failure occurs shows that there were two subsequent ACCESS() calls with the same filehandle and both fails with -ESTALE error. I have tested the fix below. Now the client issue a LOOKUP after the ACCESS() call fails with -ESTALE. If all this makes sense to you, can you consider this for inclusion? Thanks, If the server returns an -ESTALE error due to stale filehandle in response to an ACCESS() call, we need to invalidate the cache and inode so that LOOKUP() can be retried. Without this change, the nfs client retries ACCESS() with the same filehandle, fails again and could lead to temporary failure of applications running on nfs mounted home. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 12月, 2008 1 次提交
-
-
由 Peter Staubach 提交于
Hi. I've been looking at a bugzilla which describes a problem where a customer was advised to use either the "noac" or "actimeo=0" mount options to solve a consistency problem that they were seeing in the file attributes. It turned out that this solution did not work reliably for them because sometimes, the local attribute cache was believed to be valid and not timed out. (With an attribute cache timeout of 0, the cache should always appear to be timed out.) In looking at this situation, it appears to me that the problem is that the attribute cache timeout code has an off-by-one error in it. It is assuming that the cache is valid in the region, [read_cache_jiffies, read_cache_jiffies + attrtimeo]. The cache should be considered valid only in the region, [read_cache_jiffies, read_cache_jiffies + attrtimeo). With this change, the options, "noac" and "actimeo=0", work as originally expected. This problem was previously addressed by special casing the attrtimeo == 0 case. However, since the problem is only an off- by-one error, the cleaner solution is address the off-by-one error and thus, not require the special case. Thanx... ps Signed-off-by: NPeter Staubach <staubach@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-