- 30 6月, 2006 4 次提交
-
-
由 Ingo Molnar 提交于
Add ->retrigger() irq op to consolidate hw_irq_resend() implementations. (Most architectures had it defined to NOP anyway.) NOTE: ia64 needs testing. i386 and x86_64 tested. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Cleanup: remove irq_descp() - explicit use of irq_desc[] is shorter and more readable. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Consolidation: remove the irq_affinity[NR_IRQS] array and move it into the irq_desc[NR_IRQS].affinity field. [akpm@osdl.org: sparc64 build fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2006 1 次提交
-
-
由 Tony Luck 提交于
Chandra Seetharaman missed one place in commit: 65edc68c [but it only shows up when building the ski simulator configuration of ia64, so thats understandable] Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 28 6月, 2006 5 次提交
-
-
由 Chandra Seetharaman 提交于
Make use the of newly defined hotplug version of cpu_notifier functionality wherever appropriate. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
Make notifier_blocks associated with cpu_notifier as __cpuinitdata. __cpuinitdata makes sure that the data is init time only unless CONFIG_HOTPLUG_CPU is defined. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
In 2.6.17, there was a problem with cpu_notifiers and XFS. I provided a band-aid solution to solve that problem. In the process, i undid all the changes you both were making to ensure that these notifiers were available only at init time (unless CONFIG_HOTPLUG_CPU is defined). We deferred the real fix to 2.6.18. Here is a set of patches that fixes the XFS problem cleanly and makes the cpu notifiers available only at init time (unless CONFIG_HOTPLUG_CPU is defined). If CONFIG_HOTPLUG_CPU is defined then cpu notifiers are available at run time. This patch reverts the notifier_call changes made in 2.6.17 Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
With Goto-san's patch, we can add new pgdat/node at runtime. I'm now considering node-hot-add with cpu + memory on ACPI. I found acpi container, which describes node, could evaluate cpu before memory. This means cpu-hot-add occurs before memory hot add. In most part, cpu-hot-add doesn't depend on node hot add. But register_cpu(), which creates symbolic link from node to cpu, requires that node should be onlined before register_cpu(). When a node is onlined, its pgdat should be there. This patch-set holds off creating symbolic link from node to cpu until node is onlined. This removes node arguments from register_cpu(). Now, register_cpu() requires 'struct node' as its argument. But the array of struct node is now unified in driver/base/node.c now (By Goto's node hotplug patch). We can get struct node in generic way. So, this argument is not necessary now. This patch also guarantees add cpu under node only when node is onlined. It is necessary for node-hot-add vs. cpu-hot-add patch following this. Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard to its 'struct node *root' argument. This patch removes it. Also modify callers of register_cpu()/unregister_cpu, whose args are changed by register-cpu-remove-node-struct patch. [Brice.Goglin@ens-lyon.org: fix it] Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yasunori Goto 提交于
When new node becomes enable by hot-add, new sysfs file must be created for new node. So, if new node is enabled by add_memory(), register_one_node() is called to create it. In addition, I386's arch_register_node() and a part of register_nodes() of powerpc are consolidated to register_one_node() as a generic_code(). This is tested by Tiger4(IPF) with node hot-plug emulation. Signed-off-by: NKeiichiro Tokunaga <tokuanga.keiich@jp.fujitsu.com> Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. Converted i386/x86-64/ia64 for now because that was the easiest way to fix ACPI which also manipulates these flags in its idle function. Cc: Nick Piggin <npiggin@novell.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
Convert a few stragglers over to for_each_possible_cpu(), remove for_each_cpu(). Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2006 1 次提交
-
-
由 Tony Luck 提交于
arch/ia64/kernel/acpi.c got forgotten when include/acpi/actbl.h got a cleanup. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 23 6月, 2006 5 次提交
-
-
由 Miklos Szeredi 提交于
Pass the POSIX lock owner ID to the flush operation. This is useful for filesystems which don't want to store any locking state in inode->i_flock but want to handle locking/unlocking POSIX locks internally. FUSE is one such filesystem but I think it possible that some network filesystems would need this also. Also add a flag to indicate that a POSIX locking request was generated by close(), so filesystems using the above feature won't send an extra locking request in this case. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dean Nelson 提交于
Modify the gen_pool allocator (lib/genalloc.c) to utilize a bitmap scheme instead of the buddy scheme. The purpose of this change is to eliminate the touching of the actual memory being allocated. Since the change modifies the interface, a change to the uncached allocator (arch/ia64/kernel/uncached.c) is also required. Both Andrey Volkov and Jes Sorenson have expressed a desire that the gen_pool allocator not write to the memory being managed. See the following: http://marc.theaimsgroup.com/?l=linux-kernel&m=113518602713125&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113533568827916&w=2Signed-off-by: NDean Nelson <dcn@sgi.com> Cc: Andrey Volkov <avolkov@varma-el.com> Acked-by: NJes Sorensen <jes@trained-monkey.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yasunori Goto 提交于
Consolidate the various arch-specific implementations of pxm_to_node() and node_to_pxm() into a single generic version. Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2006 5 次提交
-
-
由 Ian Wienand 提交于
Sorry I didn't notice earlier, but that BUG_ON triggers for me on the simulator. AFAICS the mask for itv is set in cpu_init(), which comes after sal_init(). Consequently on the simulator the itv still has its start value of zero. I've probably missed something, but I wonder why at this stage of the boot you even need to save and restore the itv? Signed-Off-By: NIan Wienand <ianw@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
struct ia64_sal_os_state has three semi-independent sections. The code in mca_asm.S assumes that these three sections are contiguous, which makes it very awkward to add new data to this structure. Remove the assumption that the sections are contiguous. Define a macro to shorten references to offsets in ia64_sal_os_state. This patch does not change the way that the code behaves. It just makes it easier to update the code in future and to add fields to ia64_sal_os_state when debugging the MCA/INIT handlers. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 David Mosberger-Tang 提交于
Just a trivial cleanup patch Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Alex Williamson 提交于
One more trivial, stand-alone patch from the Xen/ia64 review. Sanity check usage of the reserved region numbers. Signed-off-by: NAlex Williamson <alex.williamson@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Mark Maule 提交于
Abstract IA64_FIRST_DEVICE_VECTOR/IA64_LAST_DEVICE_VECTOR since SN platforms use a subset of the IA64 range. Implement this by making the above macros global variables which the platform can override in it setup code. Also add a reserve_irq_vector() routine used by SN to mark a vector's as in-use when that weren't allocated through assign_irq_vector(). Signed-off-by: NMark Maule <maule@sgi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 5月, 2006 2 次提交
-
-
由 Chen, Kenneth W 提交于
Calls to set_irq_info in set_irq_affinity_info() is redundant because irq_affinity mask was set just one line immediately above it. Remove that duplicate call. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Chen, Kenneth W 提交于
When CONFIG_PCI_MSI is set, move_irq() is an empty function, causing grief when sys admin tries to bind interrupt to CPU. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 13 5月, 2006 1 次提交
-
-
由 Len Brown 提交于
When building sim_defconfig, which does not define CONFIG_ACPI arch/ia64/kernel/acpi.c:71: warning: 'acpi_madt_rev' defined but not used really acpi.c should not be built when CONFIG_ACPI=n... Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 5月, 2006 1 次提交
-
-
由 Bjorn Helgaas 提交于
This closes a couple holes in our attribute aliasing avoidance scheme: - The current kernel fails mmaps of some /dev/mem MMIO regions because they don't appear in the EFI memory map. This keeps X from working on the Intel Tiger box. - The current kernel allows UC mmap of the 0-1MB region of /sys/.../legacy_mem even when the chipset doesn't support UC access. This causes an MCA when starting X on HP rx7620 and rx8620 boxes in the default configuration. There's more detail in the Documentation/ia64/aliasing.txt file this adds, but the general idea is that if a region might be covered by a granule-sized kernel identity mapping, any access via /dev/mem or mmap must use the same attribute as the identity mapping. Otherwise, we fall back to using an attribute that is supported according to the EFI memory map, or to using UC if the EFI memory map doesn't mention the region. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 01 5月, 2006 1 次提交
-
-
由 Al Viro 提交于
... it's always current, and that's a good thing - allows simpler locking. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 4月, 2006 1 次提交
-
-
由 Russ Anderson 提交于
When the mca recovery code encounters a condition that makes the MCA non-recoverable, print the reason it could not recover. This will make it easier to identify why the recovery code did not recover. Signed-off-by: NRuss Anderson <rja@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 26 4月, 2006 2 次提交
-
-
由 Chandra Seetharaman 提交于
Few of the notifier_chain_register() callers use __init in the definition of notifier_call. It is incorrect as the function definition should be available after the initializations (they do not unregister them during initializations). This patch fixes all such usages to _not_ have the notifier_call __init section. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jens Axboe 提交于
sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice() moves data to a pipe, with the input being a user address range instead. This uses an approach suggested by Linus, where we can hold partial ranges inside the pages[] map. Hopefully this will be useful for network receive support as well. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 21 4月, 2006 1 次提交
-
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 20 4月, 2006 1 次提交
-
-
由 Prasanna S Panchamukhi 提交于
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 4月, 2006 1 次提交
-
-
由 Bjorn Helgaas 提交于
dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 4月, 2006 1 次提交
-
-
由 Keith Owens 提交于
ia64_wait_for_slaves() was changed in 2.6.17-rc1 to report the slave state. It incorrectly assumes that all slaves are for MCA, but ia64_wait_for_slaves() is also called from the INIT monarch handler. The existing message is very misleading, so correct it. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 11 4月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
Basically an in-kernel implementation of tee, which uses splice and the pipe buffers as an intelligent way to pass data around by reference. Where the user space tee consumes the input and produces a stdout and file output, this syscall merely duplicates the data inside a pipe to another pipe. No data is copied, the output just grabs a reference to the input pipe data. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 08 4月, 2006 2 次提交
-
-
由 Keith Owens 提交于
The OS INIT handler is loading incorrect values into cr.ifa on exit. This shows up as a hang when resuming after an INIT that is delivered while a cpu is in user space. Correct the value loaded into cr.ifa. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
The MCA/INIT handlers maintain important state in the SAL to OS (sos) area and in the monarch_cpu flag. Kernel debuggers (such as KDB) need this data, and may need to adjust the monarch_cpu field so make the data available to the notify_die hooks. Define two more events for calling the functions on the notify_die chain. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 07 4月, 2006 2 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu under arch/ia64/kernel/. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fjitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Bjorn Helgaas 提交于
Get rid of the manual search of _CRS, in favor of acpi_get_vendor_resource() which is now provided by the ACPI CA. And fall back to searching for a consumer-only address space descriptor if no vendor-defined resource is found. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-