As pointed out by Saito-san, without the sr.bl manipulation we can
occasionally hit delays in the idle loop due to interrupt handling, so
ensure that interrupts are blocked before going to sleep.

At the same time, we throw in TIF_POLLING_NRFLAG for the !hlt_counter
case (primarily used by the ST-40 parts).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds basic support for clockevents and clocksources,
presently only implemented for TMU-based systems (which
are the majority of SH-3 and SH-4 systems).

The old NO_IDLE_HZ implementation is also dropped completely,
the only users of this were on TMU-based systems anyways.

More work needs to be done to generalize the TMU handling,
in that the current implementation is rather tied to the
notion of TMU0 and TMU1 utilization.

Additionally, as more SH timers switch over to this scheme,
we'll be able to gut most of the remaining system timer
infrastructure that existed before.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This went in immediately after SH added the die chain notifiers,
so move over to that instead..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

There are a few different cases for figuring out how to
size the instruction. We read in the instruction located
at regs->pc - 4 when rewinding the opcode to figure out if
there's a 32-bit opcode before the faulting instruction, with
a default of a - 2 adjustment on a mismatch. In practice this
works for the cases where pc - 4 is just another 16-bit opcode,
or we happen to have a 32-bit and a 16-bit immediately
preceeding the pc value.

In the cases where we aren't rewinding, this is much less ugly..

We also don't bother fixing up the places where we're explicitly
dealing with 16-bit instructions, since this might lead to
confusion regarding the encoding size possibilities on other
CPU variants.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH-2A supports both 16 and 32-bit instructions, add a simple helper
for figuring out the instruction size in the places where there are
hardcoded 16-bit assumptions.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This moves SH over to the generic quicklists. As per x86_64,
we have special mappings for the PGDs, so these go on their
own list..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add the atomic die chains in, kprobes needs these.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Support the SH7712 (SH3-DSP) Solution Engine reference board.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

When I run a preemptive kernel-2.6.20 for SH7780, a created
kthread(pdflush) can not exit by do_exit() in kernel_thread_helper. I
think that the created kthread should have a room for 'struct pt_regs'
space on the stack top, because __switch_to() will refer to the space as
follows using 'regs = task_pt_regs(prev)' and next condition may be true.
Signed-off-by: NHideo Saito <saito@densan.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This rips out most of the needlessly complicated sh_bios and kgdb
trap handling, and forces it all through a common fast dispatch path.
As more debug traps are inserted, it's important to keep them in sync
for all of the parts, not just SH-3/4.

As the SH-2 parts are unable to do traps in the >= 0x40 range, we
restrict the debug traps to the 0x30-0x3f range on all parts, and
also bump the kgdb breakpoint trap down in to this range (from 0xff
to 0x3c) so it's possible to use for nommu.

Optionally, this table can be padded out to catch spurious traps for
SH-3/4, but we don't do that yet..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some time ago the schedule frame size changed and we failed to reflect
this in get_wchan() at the time. This first popped up as a problem on
SH7751R where schedule_frame ended up being unaligned and generating
an unaligned trap. This fixes it up again..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Previously we haven't been doing anything with verbose BUG() reporting,
and we've been relying on the oops path for handling BUG()'s, which is
rather sub-optimal.

This switches BUG handling to use a fixed trapa vector (#0x3e) where we
construct a small bug frame post trapa instruction to get the context
right. This also makes it trivial to wire up a DIE_BUG for the atomic
die chain, which we couldn't really do before.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This fixes up the kernel for gcc4. The existing exception handlers
needed some wrapping for pt_regs access, acessing the registers
via a RELOC_HIDE() pointer.

The strcpy() issues popped up here too, so add -ffreestanding and
kill off the symbol export.
Signed-off-by: NStuart Menefy <stuart.menefy@st.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This splits out some of the previous show_stack() implementation which
was mostly doing the show_trace() work without actually dumping any of
the stack contents. This now gets split in to two sections, where we
do the fetching of the stack pointer and subsequent stack dumping in
show_stack(), while moving the call trace in to show_trace().
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

A simple patch to enable the UBC on SH-4A.
Signed-off-by: NRyusuke Sakato <sakato@hsdv.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This implements initial support for the vsyscall page on SH.
At the moment we leave it configurable due to having nommu
to support from the same code base. We hook it up for the
signal trampoline return at present, with more to be added
later, once uClibc catches up.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This was falling a bit behind..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds support for the aforementioned CPU subtypes, and cleans
up some build issues encountered as a result.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

A few more outstanding nommu fixups..
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Drop TIF_USERSPACE and add addr_limit to the thread_info struct.
Subsequently, use that for address checking in strnlen_user() to
ward off bogus -EFAULTs.

Make __strnlen_user() return 0 on exception, rather than -EFAULT.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Cleanup for user headers, as noted:

asm-sh/page.h requires asm-generic/memory_model.h, which does not exist in exported headers
asm-sh/ptrace.h requires asm/ubc.h, which does not exist in exported headers
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

include/linux/platform.h contained nothing that was actually used except
the default_idle() prototype, and is therefore removed by this patch.

This patch does the following with the platform specific default_idle()
functions on different architectures:
- remove the unused function:
  - parisc
  - sparc64
- make the needlessly global function static:
  - arm
  - h8300
  - m68k
  - m68knommu
  - s390
  - v850
  - x86_64
- add a prototype in asm/system.h:
  - cris
  - i386
  - ia64
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NPatrick Mochel <mochel@digitalimplant.org>
Acked-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

machine_halt() managed to trigger the soft lockup detection due to not
disabling interrupts before going to sleep, so correct that.

machine_power_off() should be using pm_power_off, which lets us drop the
board-specific hacks from here.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds kexec() support for SH.
Signed-off-by: Nkogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Cc: <fastboot@lists.osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

)

From: Adrian Bunk <bunk@stusta.de>

- create one common dump_thread() prototype in kernel.h

- dump_thread() is only used in fs/binfmt_aout.c and can therefore be
  removed on all architectures where CONFIG_BINFMT_AOUT is not
  available
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce
confusion, and make their semantics rigid.  Improves efficiency of
resched_task and some cpu_idle routines.

* In resched_task:
- TIF_NEED_RESCHED is only cleared with the task's runqueue lock held,
  and as we hold it during resched_task, then there is no need for an
  atomic test and set there. The only other time this should be set is
  when the task's quantum expires, in the timer interrupt - this is
  protected against because the rq lock is irq-safe.

- If TIF_NEED_RESCHED is set, then we don't need to do anything. It
  won't get unset until the task get's schedule()d off.

- If we are running on the same CPU as the task we resched, then set
  TIF_NEED_RESCHED and no further action is required.

- If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set
  after TIF_NEED_RESCHED has been set, then we need to send an IPI.

Using these rules, we are able to remove the test and set operation in
resched_task, and make clear the previously vague semantics of
POLLING_NRFLAG.

* In idle routines:
- Enter cpu_idle with preempt disabled. When the need_resched() condition
  becomes true, explicitly call schedule(). This makes things a bit clearer
  (IMO), but haven't updated all architectures yet.

- Many do a test and clear of TIF_NEED_RESCHED for some reason. According
  to the resched_task rules, this isn't needed (and actually breaks the
  assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock
  held). So remove that. Generally one less locked memory op when switching
  to the idle thread.

- Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner
  most polling idle loops. The above resched_task semantics allow it to be
  set until before the last time need_resched() is checked before going into
  a halt requiring interrupt wakeup.

  Many idle routines simply never enter such a halt, and so POLLING_NRFLAG
  can be always left set, completely eliminating resched IPIs when rescheduling
  the idle task.

  POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Con Kolivas <kernel@kolivas.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Run idle threads with preempt disabled.

Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()).
How did it ever work before?

Might fix the CPU hotplugging hang which Nigel Cunningham noted.

We think the bug hits if the idle thread is preempted after checking
need_resched() and before going to sleep, then the CPU offlined.

After calling stop_machine_run, the CPU eventually returns from preemption and
into the idle thread and goes to sleep.  The CPU will continue executing
previous idle and have no chance to call play_dead.

By disabling preemption until we are ready to explicitly schedule, this bug is
fixed and the idle threads generally become more robust.

From: alexs <ashepard@u.washington.edu>

  PPC build fix

From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>

  MIPS build fix
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!