Impact: find right nr_irqs_gsi on some systems.

One test-system has gap between gsi's:

[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[    0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[    0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[    0.000000] nr_irqs_gsi: 38

So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.

need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make check-timer more robust potentially solve boot fragility

For edge trigger io-apic routing, we already unmasked the pin via
setup_IO_APIC_irq(), so don't unmask it again.

Also call local_irq_disable() between timer_irq_works(), because it
calls local_irq_enable() inside.

Also remove not needed apic version reading for 64-bit
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

also could kill platform_legacy_irq
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make nr_irqs depend more on cards used in a system

depend on nr_irq_gsi more, and have a ratio for MSI.

v2: make nr_irqs less than NR_VECTORS * nr_cpu_ids
    aka if only one cpu, we only can support nr_irqs = NR_VECTORS
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- Consistent alignment of help text
- Use the ---help--- keyword everywhere consistently as a visual separator
- fix whitespace mismatches
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also move xquad_portio over to where it's allocated.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

only leave _default_ipi_xx etc in .h

Beyond the cleanup factor, this saves a bit of code size as well:

    text	   data	    bss	    dec	            hex	filename
 7281931	1630144	1463304	10375379	 9e50d3	vmlinux.before
 7281753	1630144	1463304	10375201	 9e5021	vmlinux.after
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.

Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Due to recurring issues with DMAR support on certain platforms.
There's a number of filesystem corruption incidents reported:

  https://bugzilla.redhat.com/show_bug.cgi?id=479996
  http://bugzilla.kernel.org/show_bug.cgi?id=12578

Provide a Kconfig option to change whether it is enabled by
default.

If disabled, it can still be reenabled by passing intel_iommu=on to the
kernel. Keep the .config option off by default.
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-By: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On an x86 system which doesn't support global mappings,
__supported_pte_mask has _PAGE_GLOBAL clear, to make sure it never
appears in the PTE.  pfn_pte() and so on will enforce it with:

static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
{
	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
		      pgprot_val(pgprot)) & __supported_pte_mask);
}

However, we overload _PAGE_GLOBAL with _PAGE_PROTNONE on non-present
ptes to distinguish them from swap entries.  However, applying
__supported_pte_mask indiscriminately will clear the bit and corrupt the
pte.

I guess the best fix is to only apply __supported_pte_mask to present
ptes.  This seems like the right solution to me, as it means we can
completely ignore the issue of overlaps between the present pte bits and
the non-present pte-as-swap entry use of the bits.

__supported_pte_mask contains the set of flags we support on the
current hardware.  We also use bits in the pte for things like
logically present ptes with no permissions, and swap entries for
swapped out pages.  We should only apply __supported_pte_mask to
present ptes, because otherwise we may destroy other information being
stored in the ptes.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Fix user-visible grammo.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Some lines exceed the 80 char width making them unreadable.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch echoes what we already do on 32-bit since
90f7d25c, and prints the DMI
product name in show_regs, so that system specific problems can be
easily identified.
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix to enable APIC for AMD Fam10h on chipsets with a missing/b0rked
	ACPI MP table (MADT)

Booting a 32bit kernel on an AMD Fam10h CPU running on chipsets with
missing/b0rked MP table leads to a hang pretty early in the boot process
due to the APIC not being initialized. Fix that by falling back to the
default APIC base address in 32bit code, as it is done in the 64bit
codepath.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: Fix race condition

xen_mc_batch has a small preempt race where it takes the address of a
percpu variable immediately before disabling interrupts, thereby
leaving a small window in which we may migrate to another cpu and save
the flags in the wrong percpu variable.  Disable interrupts before
saving the old flags in a percpu.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: Fixes dumpstack and KDB on 64 bits

This re-adds the old stack pointer to the top of the irqstack to help
with unwinding.  It was removed in commit d99015b1
as part of the save_args out-of-line work.

Both dumpstack and KDB require this information.
Signed-off-by: NMartin Hicks <mort@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch adds a MX2/MX3 specific SDHC driver. The hardware is basically
the same as in the MX1, but unlike the MX1 controller the MX2
controller just works as expected. Since the MX1 driver has more
workarounds for bugs than anything else I had no success with supporting
MX1 and MX2 in a sane way in one driver.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Recently, a patch left DEBUG enabled in the powerpc common PCI code,
resulting in an old bug in a pr_debug() statement to show up and cause
a NULL dereference on some machines.

This fixes the pr_debug() statement and reverts to DEBUG not being
force-enabled in that file.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Eric Paris reported:

> I have an hp dl785g5 which is unable to successfully run
> 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126.  During bootup
> (early in userspace daemons starting) I get the below BUG, which quickly
> renders the machine dead.  I assume it is because sparse_irq_lock never
> gets released when the BUG kills that task.

Adjust lock sequence when migrating a descriptor with
CONFIG_NUMA_MIGRATE_IRQ_DESC enabled.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[
  mingo@elte.hu: these fixes are a subset of changes cherry-picked from:

     git://git.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6.git

  They fix various problems that recent x86 changes caused in the Voyager
  subarchitecture: both APIC changes and cpumask changes and certain
  cleanups caused subarch assumptions to break.

  Most of these changes are obsolete as the subarch code has been removed
  from the x86 development tree - but we merge them upstream to make Voyager
  build and boot.
]
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reduce include file dependencies a bit - remove the two headers
that are included in irq_vectors.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Describe the layout of x86 trap/exception/IRQ vectors and clean
up indentation and other small details.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove a Voyager complication from the generic irq_vectors.h header.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They dont belong into the generic headers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the spurious vector sanity check to the place where it's
defined - out of a .c file.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Most of the vector layout on 32-bit and 64-bit is identical now,
so eliminate the duplicated enumeration of the vectors.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a slot for the performance monitoring interrupt. Not yet used
by any subsystem - but the hardware has it. (This eases integration
with performance monitoring code.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix potential miscompile (currently believed non-manifest)

As the comment explains, the VBE DDC call can clobber any register.
Tell the compiler about that fact.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix rare crash on 32-bit

The 32-bit APIC drivers had their send_IPI_self vectors set to NULL,
but ioapic_retrigger_irq() depends on it being always set. Fix it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In Linus' current -git the cpumask member is now a pointer.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This kernel symbol provides a way for drivers to switch on alternate
function for a certain GPIO pin. Turning it off is done implicitly when
changing the GPIO direction, as that would be fixed when using the given
pin als alternate function.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove the {set,get}_434_reg() prototypes, as the functions have been
removed. Also move the prototypes for {get,set}_latch_u5() to the correct
place.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As rb532_dev3_ctl_res is not used by any platform device, it can be dropped
when not used for holding the physical address of the device 3 controller.

Also a size of one byte should suffice when ioremapping the physical
address mentioned above, as only a single byte is being read from and
written to it.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These kernel symbols are unused. Also, since dev3 init has been moved to
devices.c, set_434_reg() breaks compiling as it uses dev3.
Signed-off-by: NPhil Sutter <n0-1@freewrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>