- 13 9月, 2006 3 次提交
-
-
由 Francois Romieu 提交于
As long as the descriptor fits on a single cacheline, the change should be almost free. Now ring_info is not used at all. Remove it. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Jeff Garzik 提交于
- 12 9月, 2006 28 次提交
-
-
由 Auke Kok 提交于
Commit 581d708e (oct. 5 2005) introduced partial Multiqueue support for e1000 which broke macro smartness in setting up head/tail registers for 82542 rev3 chipsets, making these adapters completely non-working since 2.6.15. This commit sets the proper head and tail registers for read and write descriptor rings. Ths fix was tested on an 82542 rev3 NIC and newer NICs. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
-
由 Andy Gospodarek 提交于
As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Christian Steineck 提交于
hostap_cs driver - added support for Proxim Harmony PCI W-Lan Card (uses pd6729 based pcmcia2pci bridge) Signed-off-by: NChristian Steineck <memphis@machzwo.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Coverity CID 1160 & 1161 Remove some dead code from bcm43xx_sysfs.c in 2.6.18-rc6 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch prints out the ucode debug status to sysfs. So, users can watch the microcode status of their hardware. Signed-off-by: NMartin Langer <martin-langer@gmx.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch prints microcode revision, patchlevel, date and time to KERN_INFO. Also, version 4.xx microcodes (rev>0x128) will be rejected by the driver, because they still do not work. Signed-off-by: NMartin Langer <martin-langer@gmx.de> Acked-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch removes code that was make obsolete when the wireless statistics in bcm43xx-softmac were changed, but was overlooked at that time. The value of bcm->stats.link_quality computed here is never used. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
This patch adds bitrate information to the scan result in the Prism54 driver, like some/most other driver do. Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ulrich Kunitz 提交于
Inspired by an e-mail by Stephen Hemminger I decided to remove all unneeded packed attributes from the code where the member variables are already aligned. This avoids horrible code being generated on some architectures. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
Tested by Vincent TOUCHARD zd1211 chip 0b05:170c v4802 high 00-11-d8 AL2230_RF pa0 g--- Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
Tested by Martin Dummer. zd1211 chip 0b3b:5630 v4330 high 00-01-e3 RF2959_RF pa0 --- Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch fixes an out of sequence step in the bcm43xx_init_board routine for bcm43xx-softmac. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This fixes various bugs in the init and shutdown code that would lead to lockups and crashes. Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
-
由 Ulrich Kunitz 提交于
Caused by a documentation issue I mixed up fields of the zd_status structure. This patch fixes it and improves also the average computation, which is now using only measurements of packets sent by the access point. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b28' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] audit: AUDIT_PERM support [PATCH] audit: more syscall classes added [PATCH] syscall classes hookup for ppc and s390 [PATCH] update audit rule change messages [PATCH] sanity check audit_buffer [PATCH] fix ppid bug in 2.6.18 kernel
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: usbtouchscreen: fix ITM data reading USB: New device ID for ftdi_sio usb serial driver USB: Support for USB20SVGA-WH & USB20SVGA-DG USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404
-
由 John W. Linville 提交于
-
由 Al Viro 提交于
add support for AUDIT_PERM predicate Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Amy Griffis 提交于
Make the audit message for implicit rule removal more informative. Make the rule update message consistent with other messages. Signed-off-by: NAmy Griffis <amy.griffis@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Amy Griffis 提交于
Add sanity checks for NULL audit_buffer consistent with other audit_log* routines. Signed-off-by: NAmy Griffis <amy.griffis@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Steve Grubb 提交于
Hello, During some troubleshooting, I found that ppid was accidentally omitted from the legacy rule section. This resulted in EINVAL for any rule with ppid sent with AUDIT_ADD. Signed-off-by: NSteve Grubb <sgrubb@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 9月, 2006 9 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Always use a sector size of 512 bytes [MMC] Cleanup 385e3227 [ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read [MMC] Fix SD timeout calculation [MMC] constify mmc_host_ops
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec] [ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling [ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left] [ARM] 3777/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [regs-*.h] [ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes [ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs [ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs [ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2* [ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410 [ARM] 3766/1: Fix typo in ARM _raw_read_trylock
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix dm9000 release_resource
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ata_piix: add map 01b for ICH7M [libata] sata_mv: errata check buglet fix
-
由 Alan Cox 提交于
There are two changes here. The first reverses the broken PCI_DEVICE conversion back to the old format. The second adds a missing PCI ID so you can actually boot 2.6.18 on 2 month old VIA motherboards (right now only 2.6.18-mm works). CC'd to Jeff to check the PCI ident but its a) in several distro kernels and b) in 2.6.18-mm [twice ??] Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
-
由 Dirk Opfer 提交于
dm9000_release_board calls release_resource with the platform resource instead of the requested resource: db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name); dm9000_release_board: if (db->addr_res != NULL) { release_resource(db->addr_res); kfree(db->addr_req); With this behavior the kernel will crash on the second removal. The attached patch fix this problem. Signed-off-by: NDirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Check if IRQ came from hardware fault (hotplug). Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Andy Gospodarek 提交于
This removes unnecessary messages that show up every time I put my ethernet card in promiscuous mode. I'm already getting notification from the networking layer, I don't need notification from the driver as well. There are probably other drivers that do this as well -- I'll look around and see what I can find. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-