The fib metric memory in this case is static in the kernel image,
so we don't need to reference count it since it's never going
to go away on us.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there are no explicit metrics attached to a route, hook
fi->fib_info up to dst_default_metrics.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is the initial gateway towards super-sharing metrics
if they are all set to zero for a route.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Jacob <jacob@internet24.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

TCP is going to record metrics for the connection,
so pre-COW the route metrics at route cache entry
creation time.

This avoids several atomic operations that have to
occur if we COW the metrics after the entry reaches
global visibility.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

Use net_device_stats instance from the struct net_device.
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing __rcu annotations and helpers.
minor : Fix some rcu_dereference() calls in macvtap
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit c6d14c84 (net: Introduce for_each_netdev_rcu() iterator)
added a race in dev_seq_next().

The rcu_dereference() call should be done _before_ testing the end of
list, or we might return a wrong net_device if a concurrent thread
changes net_device list under us.

Note : discovered thanks to a sparse warning :

net/core/dev.c:3919:9: error: incompatible types in comparison expression
(different address spaces)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Please note that the IPSEC dst entry metrics keep using
the generic metrics COW'ing mechanism using kmalloc/kfree.

This gives the IPSEC routes an opportunity to use metrics
which are unique to their encapsulated paths.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They are bogus.  The basic idea is that I wanted to make sure
that prefixed routes never bind to peers.

The test I used was whether RTF_CACHE was set.

But first of all, the RTF_CACHE flag is set at different spots
depending upon which ip6_rt_copy() caller you're talking about.

I've validated all of the code paths, and even in the future
where we bind peers more aggressively (for route metric COW'ing)
we never bind to prefix'd routes, only fully specified ones.
This even applies when addrconf or icmp6 routes are allocated.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pskb_expand_head() triggers a kmemcheck warning when copy of
skb_shared_info is done in pskb_expand_head()

This is because destructor_arg field is not necessarily initialized at
this point. Add kmemcheck_annotate_variable() call in __alloc_skb() to
instruct kmemcheck this is a normal situation.

Resolves bugzilla.kernel.org 27212

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=27212Reported-by: NChristian Casteyde <casteyde.christian@free.fr>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I'm testing an API that uses IFLA_AF_SPEC attribute.
In the rtnetlink core , the set_link_af() member
of the rtnl_af_ops struct receives the nested attribute
(as I expected), but the validate_link_af() member
receives the parent attribute.
IMO, this patch fixes this.
Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch fixes: "DMA-API: device driver tries to free an invalid DMA
memory address" warning reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=639824Reported-by: NFrantisek Hanzlik <franta@hanzlici.cz>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Linux network stack expects all GSO SKBs to have ip_summed ==
CHECKSUM_PARTIAL (which implies that the frame contains a partial
checksum) and the Xen network ring protocol similarly expects an SKB
which has GSO set to also have NETRX_csum_blank (which also implies a
partial checksum).

However there have been cases of buggy guests which mark a frame as
GSO but do not set csum_blank. If we detect that we a receiving such a
frame (which manifests as ip_summed != PARTIAL && skb_is_gso) then
force the SKB to partial and recalculate the checksum, since we cannot
rely on the peer having done so if they have not set csum_blank.

Add an ethtool stat to track occurances of this event.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David Miller <davem@davemloft.net>
Cc: xen-devel@lists.xensource.com
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/econet/af_econet.c: In function ‘econet_sendmsg’:
net/econet/af_econet.c:494: warning: label ‘error’ defined but not used
net/econet/af_econet.c:268: warning: unused variable ‘sk’
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NPhil Blundell <philb@gnu.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the RTAX_LOCKED metric to INETPEER_METRICS_NEW (basically,
all ones) on fresh inetpeer entries.

This way code can determine if default metrics have been loaded
in from a routing table entry already.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 'ath9k: Add more information to debugfs xmit file.' added more
debug counters to ath9k and also added some lines of code to ath9k_hw.

Since ath9k_hw is also used by ath9k_htc, its code must not depend on ath9k
data structures. In this case it was not fatal, but it's still wrong, so
the code needs to be moved back to ath9k.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

"mac80211 will properly assign sequence numbers to QoS-data
frames but cannot do so correctly for non-QoS-data and
management frames because beacons need them from that counter
as well and mac80211 cannot guarantee proper sequencing."
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch syncs up the header files with
the project's main firmware carl9170fw.git.
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NThomas Jacob <jacob@internet24.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Routing metrics are now copy-on-write.

Initially a route entry points it's metrics at a read-only location.
If a routing table entry exists, it will point there.  Else it will
point at the all zero metric place-holder called 'dst_default_metrics'.

The writeability state of the metrics is stored in the low bits of the
metrics pointer, we have two bits left to spare if we want to store
more states.

For the initial implementation, COW is implemented simply via kmalloc.
However future enhancements will change this to place the writable
metrics somewhere else, in order to increase sharing.  Very likely
this "somewhere else" will be the inetpeer cache.

Note also that this means that metrics updates may transiently fail
if we cannot COW the metrics successfully.

But even by itself, this patch should decrease memory usage and
increase cache locality especially for routing workloads.  In those
cases the read-only metric copies stay in place and never get written
to.

TCP workloads where metrics get updated, and those rare cases where
PMTU triggers occur, will take a very slight performance hit.  But
that hit will be alleviated when the long-term writable metrics
move to a more sharable location.

Since the metrics storage went from a u32 array of RTAX_MAX entries to
what is essentially a pointer, some retooling of the dst_entry layout
was necessary.

Most importantly, we need to preserve the alignment of the reference
count so that it doesn't share cache lines with the read-mostly state,
as per Eric Dumazet's alignment assertion checks.

The only non-trivial bit here is the move of the 'flags' member into
the writeable cacheline.  This is OK since we are always accessing the
flags around the same moment when we made a modification to the
reference count.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On PPC for example, AER is not supported and we see unnecessary AER
error message without this patch:

bnx2 0003:01:00.1: pci_cleanup_aer_uncorrect_error_status failed 0xfffffffb
Reported-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The chip's page tables did not set up properly on big endian machines,
causing EEH errors on PPC machines.
Reported-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like ipv4, we have to propagate the ipv6 route peer into
the ipsec top-level route during instantiation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unused macros and cleanup buffer_type enumeration
Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

For events that include only the local struct as
their parameter, we can use DECLARE_EVENT_CLASS
and save quite some binary size across segments
as well lines of code.

   text	   data	    bss	    dec	    hex	filename
 375745	  19296	    916	 395957	  60ab5	mac80211.ko.before
 367473	  17888	    916	 386277	  5e4e5	mac80211.ko.after
  -8272   -1408       0   -9680   -25d0 delta

Some more tracepoints with identical arguments
could be combined like this but for now this is
the one that benefits most.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

mqprio_dump() should make sure all fields of struct tc_mqprio_qopt are
initialized.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch pivots the tg3 driver to the new VLAN infrastructure.
All references to vlgrp have been removed.  The driver still attempts to
disable VLAN tag stripping if CONFIG_VLAN_8021Q or
CONFIG_VLAN_8021Q_MODULE is not defined.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6

xt_connlimit normally records the "original" tuples in a hashlist
(such as "1.2.3.4 -> 5.6.7.8"), and looks in this list for iph->daddr
when counting.

When the user however uses DNAT in PREROUTING, looking for
iph->daddr -- which is now 192.168.9.10 -- will not match. Thus in
daddr mode, we need to record the reverse direction tuple
("192.168.9.10 -> 1.2.3.4") instead. In the reverse tuple, the dst
addr is on the src side, which is convenient, as count_them still uses
&conn->tuple.src.u3.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>

Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates copyrights and updates the tg3 version to 3.117.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>