- 07 5月, 2008 2 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 22eecde2. Uli reports that it breaks UML on x86-64 with the Fedora 8 gcc (gcc 4.1.2), causing a crash on startup. See http://marc.info/?l=linux-kernel&m=121011722806093&w=2 for a trace. Reported-by: NUlrich Drepper <drepper@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32. That came from 9fc34113 x86: debug pmd_bad(); but we understand now that the typecasting was wrong for PAE in the previous version: pagetable pages above 4GB looked bad and stopped Arjan from booting. And revert that cded932b x86: fix pmd_bad and pud_bad to support huge pages. It was the wrong way round: we shouldn't weaken every pmd_bad and pud_bad check to let huge pages slip through - in part they check that we _don't_ have a huge page where it's not expected. Put the x86 pmd_bad() and pud_bad() definitions back to what they have long been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking junk in the upper word is good; and x86_64 should follow x86_32's stricter comparison, to stop thinking any subset of required bits is good); but that should be a later patch. Fix Hans' good observation that follow_page() will never find pmd_huge() because that would have already failed the pmd_bad test: test pmd_huge in between the pmd_none and pmd_bad tests. Tighten x86's pmd_huge() check? No, once it's a hugepage entry, it can get quite far from a good pmd: for example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits. However... though follow_page() contains this and another test for huge pages, so it's nice to keep it working on them, where does it actually get called on a huge page? get_user_pages() checks is_vm_hugetlb_page(vma) to to call alternative hugetlb processing, as does unmap_vmas() and others. Signed-off-by: NHugh Dickins <hugh@veritas.com> Earlier-version-tested-by: NIngo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 5月, 2008 5 次提交
-
-
由 Ingo Molnar 提交于
add the HAVE_UNSTABLE_SCHED_CLOCK, for architectures to select. the next change utilizes it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Finn Thain 提交于
Remove the rest of the old mac_esp driver. Also ditch the rest of the machw mechanism, it needs to be replaced by a fake openfirmware tree. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roman Zippel 提交于
Fix 68040 bus fault handling, so the standard kernel exception handling can be used for i/o probing. Contrary to normal access faults there is nothing to fix, but at least we have to disable writebacks to avoid recursive faults. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
this change: | commit 08f1c192 | Author: Muli Ben-Yehuda <muli@il.ibm.com> | Date: Sun Jul 22 00:23:39 2007 +0300 | | x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata | | This patch introduces struct pci_sysdata to x86 and x86-64, and | converts the existing two users (NUMA, Calgary) to use it. | | This lays the groundwork for having other users of sysdata, such as | the PCI domains work. | | The Calgary bits are tested, the NUMA bits just look ok. replaces pcibios_scan_root with pci_scan_bus_parented... but in pcibios_scan_root we have a DMI check: dmi_check_system(pciprobe_dmi_table); when when have several peer root buses this could be called multiple times (which is bad), so move that call to pci_access_init(). Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Yinghai Lu 提交于
so we don't align the io port start address for pci cards. also move out dmi check out acpi.c, because it has nothing to do with acpi. it could spare some calling when we have several peer root buses. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 05 5月, 2008 14 次提交
-
-
由 Denis V. Lunev 提交于
Simply replace proc_create and further data assigned with proc_create_data. No need to check for data!=NULL after that. Signed-off-by: NDenis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Emil Medve 提交于
We provide an ioremap_flags, so this provides a corresponding devm_ioremap_prot. The slight name difference is at Ben Herrenschmidt's request as he plans on changing ioremap_flags to ioremap_prot in the future. Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NTejun Heo <htejun@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Randy Dunlap 提交于
Fix x86 setup printk format warming: next-20080430/arch/x86/kernel/setup.c:172: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
CONFIG_OLPC needs to depend on MGEODE_LX Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Adrian Bunk 提交于
Add the missing MODULE_LICENSE("GPL"). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ben 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=10547 Newer Dell OptiPlex 745s hang before rebooting after 'sudo reboot'. A patch for some versions of the OptiPlex was proposed here -- http://lkml.org/lkml/2007/6/5/59 -- and is included in 2.6.23 and later kernels, according to http://lxr.linux.no/linux+v2.6.23/arch/i386/kernel/reboot.c . However, the DMI_BOARD_NAME ("0WF810") is too restrictive. Newer OptiPlex machines have a DMI_BOARD_NAME of "0RF703". I therefore suggest adding another clause to reboot.c, similar to the one in the original patch, but matching a DMI_BOARD_NAME of "0RF703". On further inspection, it seems that there are other DMI_BOARD_NAMEs for this same machine. They seem to change from time to time, which means that the current code is fragile. Moreover, using bios reboot should not break non-SFF OptiPlex 745s, and so a reasonable fix is to simply drop the match on DMI_BOARD_NAME. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global additional_cpus static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
start_secondary() needlessly became global. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
In kernel/acpi/realmode/Makefile use the 'always' variable to say that wakeup.bin should always be made. In acpi/Makefile we then do not need to specify the requested target and we avoid the message from make: `arch/x86/kernel/acpi/realmode/wakeup.bin' is up to date. Add wakeup.lds to list af targets to avoid rebuilding wakeup.bin - from Roland McGrath. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@suse.cz> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
this is what caused gcc 4.3 to throw an internal error when OPTIMIZE_INLINING was enabled ... Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
arch/x86/pci/Makefile_32 has a nasty detail. VISWS and NUMAQ build override the generic pci-y rules. This needs a proper cleanup, but that needs more thoughts. Undo commit 895d3093 x86: numaq fix do not override the existing pci-y rule when adding visws or numaq rules. There is also a stupid init function ordering problem vs. acpi.o Add comments to the Makefile to avoid tripping over this again. Remove the srat stub code in discontig_32.c to allow a proper NUMAQ build. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 5月, 2008 17 次提交
-
-
由 Glauber Costa 提交于
Since the pv_apic_ops are only present if CONFIG_X86_LOCAL_APIC is compiled in, kvmclock failed to build without this option. This patch fixes this. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
nonpae guests can call rmap_write_protect twice per page (for page tables) or four times per page (for page directories), triggering a bogus warning. Remove the warning. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Andrea Arcangeli 提交于
This make sure not to schedule in atomic during fx_init. I also changed the name of fpu_init to fx_finit to avoid duplicating the name with fpu_init that is already used in the kernel, this makes grep simpler if nothing else. Signed-off-by: NAndrea Arcangeli <andrea@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
Clear pending exceptions when setting new register values. This avoids spurious exceptions after restoring a vcpu state or after reset-on-triple-fault. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
The in-kernel PIT emulation ignores pending timers if operating under mode 4, which for example DragonFlyBSD uses (and Plan9 too, apparently). Mode 4 seems to be similar to one-shot mode, other than the fact that it starts counting after the next CLK pulse once programmed, while mode 1 starts counting immediately, so add a FIXME to enhance precision. Fixes sourceforge bug 1952988. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Acked-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The recent changes allowing memory operands with lmsw and smsw left lmsw with writeback enabled. Since lmsw has no oridinary destination operand, the dst pointer was not initialized, resulting in an oops. Close the hole by disabling writeback for lmsw. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Ehrhardt 提交于
This patch adds the delivery of INTERRUPT_FP_UNAVAIL exceptions to the guest. It's needed if a guest uses ppc binaries using the Floating point instructions. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Hollis Blanchard 提交于
This reduces host CPU usage when the guest is idle. However, the guest must set MSR[WE] in its idle loop, which Linux did not do until 2.6.26. Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NJerone Young <jyoung5@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
The busy bit is bit 1 of the type field, not bit 8. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
[aliguory: plug leak] Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Currently EPT level is 4 for both pae and x86_64. The patch remove the #ifdef for alloc root_hpa and free root_hpa to support EPT. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Enable kvm_set_spte() to generate EPT entries. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
The function get_tdp_level() provided the number of tdp level for EPT and NPT rather than the NPT specific macro. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Move some definitions to mmu.h in order to allow building common table entries between EPT and non-EPT. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Ulrich Drepper 提交于
This replaces the duplicated arch-specific versions of "sys_pipe()" with one unified implementation. This removes almost 250 lines of duplicated code. It's marked __weak, so that *if* an architecture wants to override the default implementation it can do so by simply having its own replacement version, since many architectures use alternate calling conventions for the 'pipe()' system call for legacy reasons (ie traditional UNIX implementations often return the two file descriptors in registers) I still haven't changed the cris version even though Linus says the BKL isn't needed. The arch maintainer can easily do it if there are really no obstacles. Signed-off-by: NUlrich Drepper <drepper@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 5月, 2008 2 次提交
-
-
由 David S. Miller 提交于
They are written, but never used. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The PROM library function prom_meminit() builds a table, prom_phys_avail[], just so that probe_memory() in arch/sparc/mm/fault.c can copy it into sp_banks[]. Just have prom_meminit() fill in the sp_banks[] array directly, and remove duplicated sort() function. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-