Vinayak Menon has reported that an excessive number of tasks was throttled
in the direct reclaim inside too_many_isolated() because NR_ISOLATED_FILE
was relatively high compared to NR_INACTIVE_FILE.  However it turned out
that the real number of NR_ISOLATED_FILE was 0 and the per-cpu
vm_stat_diff wasn't transferred into the global counter.

vmstat_work which is responsible for the sync is defined as deferrable
delayed work which means that the defined timeout doesn't wake up an idle
CPU.  A CPU might stay in an idle state for a long time and general effort
is to keep such a CPU in this state as long as possible which might lead
to all sorts of troubles for vmstat consumers as can be seen with the
excessive direct reclaim throttling.

This patch basically reverts 39bf6270 ("VM statistics: Make timer
deferrable") but it shouldn't cause any problems for idle CPUs because
only CPUs with an active per-cpu drift are woken up since 7cc36bbd
("vmstat: on-demand vmstat workers v8") and CPUs which are idle for a
longer time shouldn't have per-cpu drift.

Fixes: 39bf6270 (VM statistics: Make timer deferrable)
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Reported-by: NVinayak Menon <vinmenon@codeaurora.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When allocation falls back to stealing free pages of another migratetype,
it can decide to steal extra pages, or even the whole pageblock in order
to reduce fragmentation, which could happen if further allocation
fallbacks pick a different pageblock.  In try_to_steal_freepages(), one of
the situations where extra pages are stolen happens when we are trying to
allocate a MIGRATE_RECLAIMABLE page.

However, MIGRATE_UNMOVABLE allocations are not treated the same way,
although spreading such allocation over multiple fallback pageblocks is
arguably even worse than it is for RECLAIMABLE allocations.  To minimize
fragmentation, we should minimize the number of such fallbacks, and thus
steal as much as is possible from each fallback pageblock.

Note that in theory this might put more pressure on movable pageblocks and
cause movable allocations to steal back from unmovable pageblocks.
However, movable allocations are not as aggressive with stealing, and do
not cause permanent fragmentation, so the tradeoff is reasonable, and
evaluation seems to support the change.

This patch thus adds a check for MIGRATE_UNMOVABLE to the decision to
steal extra free pages.  When evaluating with stress-highalloc from
mmtests, this has reduced the number of MIGRATE_UNMOVABLE fallbacks to
roughly 1/6.  The number of these fallbacks stealing from MIGRATE_MOVABLE
block is reduced to 1/3.  There was no observation of growing number of
unmovable pageblocks over time, and also not of increased movable
allocation fallbacks.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When allocation falls back to another migratetype, it will steal a page
with highest available order, and (depending on this order and desired
migratetype), it might also steal the rest of free pages from the same
pageblock.

Given the preference of highest available order, it is likely that it will
be higher than the desired order, and result in the stolen buddy page
being split.  The remaining pages after split are currently stolen only
when the rest of the free pages are stolen.  This can however lead to
situations where for MOVABLE allocations we split e.g.  order-4 fallback
UNMOVABLE page, but steal only order-0 page.  Then on the next MOVABLE
allocation (which may be batched to fill the pcplists) we split another
order-3 or higher page, etc.  By stealing all pages that we have split, we
can avoid further stealing.

This patch therefore adjusts the page stealing so that buddy pages created
by split are always stolen.  This has effect only on MOVABLE allocations,
as RECLAIMABLE and UNMOVABLE allocations already always do that in
addition to stealing the rest of free pages from the pageblock.  The
change also allows to simplify try_to_steal_freepages() and factor out CMA
handling.

According to Mel, it has been intended since the beginning that buddy
pages after split would be stolen always, but it doesn't seem like it was
ever the case until commit 47118af0 ("mm: mmzone: MIGRATE_CMA
migration type added").  The commit has unintentionally introduced this
behavior, but was reverted by commit 0cbef29a ("mm:
__rmqueue_fallback() should respect pageblock type").  Neither included
evaluation.

My evaluation with stress-highalloc from mmtests shows about 2.5x
reduction of page stealing events for MOVABLE allocations, without
affecting the page stealing events for other allocation migratetypes.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When studying page stealing, I noticed some weird looking decisions in
try_to_steal_freepages().  The first I assume is a bug (Patch 1), the
following two patches were driven by evaluation.

Testing was done with stress-highalloc of mmtests, using the
mm_page_alloc_extfrag tracepoint and postprocessing to get counts of how
often page stealing occurs for individual migratetypes, and what
migratetypes are used for fallbacks.  Arguably, the worst case of page
stealing is when UNMOVABLE allocation steals from MOVABLE pageblock.
RECLAIMABLE allocation stealing from MOVABLE allocation is also not ideal,
so the goal is to minimize these two cases.

The evaluation of v2 wasn't always clear win and Joonsoo questioned the
results.  Here I used different baseline which includes RFC compaction
improvements from [1].  I found that the compaction improvements reduce
variability of stress-highalloc, so there's less noise in the data.

First, let's look at stress-highalloc configured to do sync compaction,
and how these patches reduce page stealing events during the test.  First
column is after fresh reboot, other two are reiterations of test without
reboot.  That was all accumulater over 5 re-iterations (so the benchmark
was run 5x3 times with 5 fresh restarts).

Baseline:

                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  5-nothp-1       5-nothp-2       5-nothp-3
Page alloc extfrag event                               10264225     8702233    10244125
Extfrag fragmenting                                    10263271     8701552    10243473
Extfrag fragmenting for unmovable                         13595       17616       15960
Extfrag fragmenting unmovable placed with movable          7989       12193        8447
Extfrag fragmenting for reclaimable                         658        1840        1817
Extfrag fragmenting reclaimable placed with movable         558        1677        1679
Extfrag fragmenting for movable                        10249018     8682096    10225696

With Patch 1:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  6-nothp-1       6-nothp-2       6-nothp-3
Page alloc extfrag event                               11834954     9877523     9774860
Extfrag fragmenting                                    11833993     9876880     9774245
Extfrag fragmenting for unmovable                          7342       16129       11712
Extfrag fragmenting unmovable placed with movable          4191       10547        6270
Extfrag fragmenting for reclaimable                         373        1130         923
Extfrag fragmenting reclaimable placed with movable         302         906         738
Extfrag fragmenting for movable                        11826278     9859621     9761610

With Patch 2:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  7-nothp-1       7-nothp-2       7-nothp-3
Page alloc extfrag event                                4725990     3668793     3807436
Extfrag fragmenting                                     4725104     3668252     3806898
Extfrag fragmenting for unmovable                          6678        7974        7281
Extfrag fragmenting unmovable placed with movable          2051        3829        4017
Extfrag fragmenting for reclaimable                         429        1208        1278
Extfrag fragmenting reclaimable placed with movable         369         976        1034
Extfrag fragmenting for movable                         4717997     3659070     3798339

With Patch 3:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  8-nothp-1       8-nothp-2       8-nothp-3
Page alloc extfrag event                                5016183     4700142     3850633
Extfrag fragmenting                                     5015325     4699613     3850072
Extfrag fragmenting for unmovable                          1312        3154        3088
Extfrag fragmenting unmovable placed with movable          1115        2777        2714
Extfrag fragmenting for reclaimable                         437        1193        1097
Extfrag fragmenting reclaimable placed with movable         330         969         879
Extfrag fragmenting for movable                         5013576     4695266     3845887

In v2 we've seen apparent regression with Patch 1 for unmovable events,
this is now gone, suggesting it was indeed noise.  Here, each patch
improves the situation for unmovable events.  Reclaimable is improved by
patch 1 and then either the same modulo noise, or perhaps sligtly worse -
a small price for unmovable improvements, IMHO.  The number of movable
allocations falling back to other migratetypes is most noisy, but it's
reduced to half at Patch 2 nevertheless.  These are least critical as
compaction can move them around.

If we look at success rates, the patches don't affect them, that didn't change.

Baseline:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            5-nothp-1             5-nothp-2             5-nothp-3
Success 1 Min         49.00 (  0.00%)       42.00 ( 14.29%)       41.00 ( 16.33%)
Success 1 Mean        51.00 (  0.00%)       45.00 ( 11.76%)       42.60 ( 16.47%)
Success 1 Max         55.00 (  0.00%)       51.00 (  7.27%)       46.00 ( 16.36%)
Success 2 Min         53.00 (  0.00%)       47.00 ( 11.32%)       44.00 ( 16.98%)
Success 2 Mean        59.60 (  0.00%)       50.80 ( 14.77%)       48.20 ( 19.13%)
Success 2 Max         64.00 (  0.00%)       56.00 ( 12.50%)       52.00 ( 18.75%)
Success 3 Min         84.00 (  0.00%)       82.00 (  2.38%)       78.00 (  7.14%)
Success 3 Mean        85.60 (  0.00%)       82.80 (  3.27%)       79.40 (  7.24%)
Success 3 Max         86.00 (  0.00%)       83.00 (  3.49%)       80.00 (  6.98%)

Patch 1:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            6-nothp-1             6-nothp-2             6-nothp-3
Success 1 Min         49.00 (  0.00%)       44.00 ( 10.20%)       44.00 ( 10.20%)
Success 1 Mean        51.80 (  0.00%)       46.00 ( 11.20%)       45.80 ( 11.58%)
Success 1 Max         54.00 (  0.00%)       49.00 (  9.26%)       49.00 (  9.26%)
Success 2 Min         58.00 (  0.00%)       49.00 ( 15.52%)       48.00 ( 17.24%)
Success 2 Mean        60.40 (  0.00%)       51.80 ( 14.24%)       50.80 ( 15.89%)
Success 2 Max         63.00 (  0.00%)       54.00 ( 14.29%)       55.00 ( 12.70%)
Success 3 Min         84.00 (  0.00%)       81.00 (  3.57%)       79.00 (  5.95%)
Success 3 Mean        85.00 (  0.00%)       81.60 (  4.00%)       79.80 (  6.12%)
Success 3 Max         86.00 (  0.00%)       82.00 (  4.65%)       82.00 (  4.65%)

Patch 2:

                             3.19-rc4              3.19-rc4              3.19-rc4
                            7-nothp-1             7-nothp-2             7-nothp-3
Success 1 Min         50.00 (  0.00%)       44.00 ( 12.00%)       39.00 ( 22.00%)
Success 1 Mean        52.80 (  0.00%)       45.60 ( 13.64%)       42.40 ( 19.70%)
Success 1 Max         55.00 (  0.00%)       46.00 ( 16.36%)       47.00 ( 14.55%)
Success 2 Min         52.00 (  0.00%)       48.00 (  7.69%)       45.00 ( 13.46%)
Success 2 Mean        53.40 (  0.00%)       49.80 (  6.74%)       48.80 (  8.61%)
Success 2 Max         57.00 (  0.00%)       52.00 (  8.77%)       52.00 (  8.77%)
Success 3 Min         84.00 (  0.00%)       81.00 (  3.57%)       79.00 (  5.95%)
Success 3 Mean        85.00 (  0.00%)       82.40 (  3.06%)       79.60 (  6.35%)
Success 3 Max         86.00 (  0.00%)       83.00 (  3.49%)       80.00 (  6.98%)

Patch 3:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            8-nothp-1             8-nothp-2             8-nothp-3
Success 1 Min         46.00 (  0.00%)       44.00 (  4.35%)       42.00 (  8.70%)
Success 1 Mean        50.20 (  0.00%)       45.60 (  9.16%)       44.00 ( 12.35%)
Success 1 Max         52.00 (  0.00%)       47.00 (  9.62%)       47.00 (  9.62%)
Success 2 Min         53.00 (  0.00%)       49.00 (  7.55%)       48.00 (  9.43%)
Success 2 Mean        55.80 (  0.00%)       50.60 (  9.32%)       49.00 ( 12.19%)
Success 2 Max         59.00 (  0.00%)       52.00 ( 11.86%)       51.00 ( 13.56%)
Success 3 Min         84.00 (  0.00%)       80.00 (  4.76%)       79.00 (  5.95%)
Success 3 Mean        85.40 (  0.00%)       81.60 (  4.45%)       80.40 (  5.85%)
Success 3 Max         87.00 (  0.00%)       83.00 (  4.60%)       82.00 (  5.75%)

While there's no improvement here, I consider reduced fragmentation events
to be worth on its own.  Patch 2 also seems to reduce scanning for free
pages, and migrations in compaction, suggesting it has somewhat less work
to do:

Patch 1:

Compaction stalls                 4153        3959        3978
Compaction success                1523        1441        1446
Compaction failures               2630        2517        2531
Page migrate success           4600827     4943120     5104348
Page migrate failure             19763       16656       17806
Compaction pages isolated      9597640    10305617    10653541
Compaction migrate scanned    77828948    86533283    87137064
Compaction free scanned      517758295   521312840   521462251
Compaction cost                   5503        5932        6110

Patch 2:

Compaction stalls                 3800        3450        3518
Compaction success                1421        1316        1317
Compaction failures               2379        2134        2201
Page migrate success           4160421     4502708     4752148
Page migrate failure             19705       14340       14911
Compaction pages isolated      8731983     9382374     9910043
Compaction migrate scanned    98362797    96349194    98609686
Compaction free scanned      496512560   469502017   480442545
Compaction cost                   5173        5526        5811

As with v2, /proc/pagetypeinfo appears unaffected with respect to numbers
of unmovable and reclaimable pageblocks.

Configuring the benchmark to allocate like THP page fault (i.e.  no sync
compaction) gives much noisier results for iterations 2 and 3 after
reboot.  This is not so surprising given how [1] offers lower improvements
in this scenario due to less restarts after deferred compaction which
would change compaction pivot.

Baseline:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    5-thp-1         5-thp-2         5-thp-3
Page alloc extfrag event                                8148965     6227815     6646741
Extfrag fragmenting                                     8147872     6227130     6646117
Extfrag fragmenting for unmovable                         10324       12942       15975
Extfrag fragmenting unmovable placed with movable          5972        8495       10907
Extfrag fragmenting for reclaimable                         601        1707        2210
Extfrag fragmenting reclaimable placed with movable         520        1570        2000
Extfrag fragmenting for movable                         8136947     6212481     6627932

Patch 1:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    6-thp-1         6-thp-2         6-thp-3
Page alloc extfrag event                                8345457     7574471     7020419
Extfrag fragmenting                                     8343546     7573777     7019718
Extfrag fragmenting for unmovable                         10256       18535       30716
Extfrag fragmenting unmovable placed with movable          6893       11726       22181
Extfrag fragmenting for reclaimable                         465        1208        1023
Extfrag fragmenting reclaimable placed with movable         353         996         843
Extfrag fragmenting for movable                         8332825     7554034     6987979

Patch 2:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    7-thp-1         7-thp-2         7-thp-3
Page alloc extfrag event                                3512847     3020756     2891625
Extfrag fragmenting                                     3511940     3020185     2891059
Extfrag fragmenting for unmovable                          9017        6892        6191
Extfrag fragmenting unmovable placed with movable          1524        3053        2435
Extfrag fragmenting for reclaimable                         445        1081        1160
Extfrag fragmenting reclaimable placed with movable         375         918         986
Extfrag fragmenting for movable                         3502478     3012212     2883708

Patch 3:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    8-thp-1         8-thp-2         8-thp-3
Page alloc extfrag event                                3181699     3082881     2674164
Extfrag fragmenting                                     3180812     3082303     2673611
Extfrag fragmenting for unmovable                          1201        4031        4040
Extfrag fragmenting unmovable placed with movable           974        3611        3645
Extfrag fragmenting for reclaimable                         478        1165        1294
Extfrag fragmenting reclaimable placed with movable         387         985        1030
Extfrag fragmenting for movable                         3179133     3077107     2668277

The improvements for first iteration are clear, the rest is much noisier
and can appear like regression for Patch 1.  Anyway, patch 2 rectifies it.

Allocation success rates are again unaffected so there's no point in
making this e-mail any longer.

[1] http://marc.info/?l=linux-mm&m=142166196321125&w=2

This patch (of 3):

When __rmqueue_fallback() is called to allocate a page of order X, it will
find a page of order Y >= X of a fallback migratetype, which is different
from the desired migratetype.  With the help of try_to_steal_freepages(),
it may change the migratetype (to the desired one) also of:

1) all currently free pages in the pageblock containing the fallback page
2) the fallback pageblock itself
3) buddy pages created by splitting the fallback page (when Y > X)

These decisions take the order Y into account, as well as the desired
migratetype, with the goal of preventing multiple fallback allocations
that could e.g.  distribute UNMOVABLE allocations among multiple
pageblocks.

Originally, decision for 1) has implied the decision for 3).  Commit
47118af0 ("mm: mmzone: MIGRATE_CMA migration type added") changed that
(probably unintentionally) so that the buddy pages in case 3) are always
changed to the desired migratetype, except for CMA pageblocks.

Commit fef903ef ("mm/page_allo.c: restructure free-page stealing code
and fix a bug") did some refactoring and added a comment that the case of
3) is intended.  Commit 0cbef29a ("mm: __rmqueue_fallback() should
respect pageblock type") removed the comment and tried to restore the
original behavior where 1) implies 3), but due to the previous
refactoring, the result is instead that only 2) implies 3) - and the
conditions for 2) are less frequently met than conditions for 1).  This
may increase fragmentation in situations where the code decides to steal
all free pages from the pageblock (case 1)), but then gives back the buddy
pages produced by splitting.

This patch restores the original intended logic where 1) implies 3).
During testing with stress-highalloc from mmtests, this has shown to
decrease the number of events where UNMOVABLE and RECLAIMABLE allocations
steal from MOVABLE pageblocks, which can lead to permanent fragmentation.
In some cases it has increased the number of events when MOVABLE
allocations steal from UNMOVABLE or RECLAIMABLE pageblocks, but these are
fixable by sync compaction and thus less harmful.

Note that evaluation has shown that the behavior introduced by
47118af0 for buddy pages in case 3) is actually even better than the
original logic, so the following patch will introduce it properly once
again.  For stable backports of this patch it makes thus sense to only fix
versions containing 0cbef29a.

[iamjoonsoo.kim@lge.com: tracepoint fix]
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>	[3.13+ containing 0cbef29a]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch makes do_mincore() use walk_page_vma(), which reduces many
lines of code by using common page table walk code.

[daeseok.youn@gmail.com: remove unneeded variable 'err']
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently pagewalker splits all THP pages on any clear_refs request.  It's
not necessary.  We can handle this on PMD level.

One side effect is that soft dirty will potentially see more dirty memory,
since we will mark whole THP page dirty at once.

Sanity checked with CRIU test suite. More testing is required.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

walk_page_range() silently skips vma having VM_PFNMAP set, which leads to
undesirable behaviour at client end (who called walk_page_range).  For
example for pagemap_read(), when no callbacks are called against VM_PFNMAP
vma, pagemap_read() may prepare pagemap data for next virtual address
range at wrong index.  That could confuse and/or break userspace
applications.

This patch avoid this misbehavior caused by vma(VM_PFNMAP) like follows:
- for pagemap_read() which has its own ->pte_hole(), call the ->pte_hole()
  over vma(VM_PFNMAP),
- for clear_refs and queue_pages which have their own ->tests_walk,
  just return 1 and skip vma(VM_PFNMAP). This is no problem because
  these are not interested in hole regions,
- for other callers, just skip the vma(VM_PFNMAP) as a default behavior.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NShiraz Hashim <shashim@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

queue_pages_range() does page table walking in its own way now, but there
is some code duplicate.  This patch applies page table walker to reduce
lines of code.

queue_pages_range() has to do some precheck to determine whether we really
walk over the vma or just skip it.  Now we have test_walk() callback in
mm_walk for this purpose, so we can do this replacement cleanly.
queue_pages_test_walk() depends on not only the current vma but also the
previous one, so queue_pages->prev is introduced to remember it.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't have to use mm_walk->private to pass vma to the callback function
because of mm_walk->vma.  And walk_page_vma() is useful if we walk over a
single vma.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pagewalk.c can handle vma in itself, so we don't have to pass vma via
walk->private.  And both of mem_cgroup_count_precharge() and
mem_cgroup_move_charge() do for each vma loop themselves, but now it's
done in pagewalk.c, so let's clean up them.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pagewalk.c can handle vma in itself, so we don't have to pass vma via
walk->private.  And show_numa_map() walks pages on vma basis, so using
walk_page_vma() is preferable.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just doing s/gather_hugetbl_stats/gather_hugetlb_stats/g, this makes code
grep-friendly.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Page table walker has the information of the current vma in mm_walk, so we
don't have to call find_vma() in each pagemap_(pte|hugetlb)_range() call
any longer.  Currently pagemap_pte_range() does vma loop itself, so this
patch reduces many lines of code.

NULL-vma check is omitted because we assume that we never run these
callbacks on any address outside vma.  And even if it were broken, NULL
pointer dereference would be detected, so we can get enough information
for debugging.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clear_refs_write() has some prechecks to determine if we really walk over
a given vma.  Now we have a test_walk() callback to filter vmas, so let's
utilize it.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pagewalk.c can handle vma in itself, so we don't have to pass vma via
walk->private.  And show_smap() walks pages on vma basis, so using
walk_page_vma() is preferable.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce walk_page_vma(), which is useful for the callers which want to
walk over a given vma.  It's used by later patches.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current implementation of page table walker has a fundamental problem in
vma handling, which started when we tried to handle vma(VM_HUGETLB).
Because it's done in pgd loop, considering vma boundary makes code
complicated and bug-prone.

From the users viewpoint, some user checks some vma-related condition to
determine whether the user really does page walk over the vma.

In order to solve these, this patch moves vma check outside pgd loop and
introduce a new callback ->test_walk().
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently no user of page table walker sets ->pgd_entry() or
->pud_entry(), so checking their existence in each loop is just wasting
CPU cycle.  So let's remove it to reduce overhead.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Lockless access to pte in pagemap_pte_range() might race with page
migration and trigger BUG_ON(!PageLocked()) in migration_entry_to_page():

CPU A (pagemap)                           CPU B (migration)
                                          lock_page()
                                          try_to_unmap(page, TTU_MIGRATION...)
                                               make_migration_entry()
                                               set_pte_at()
<read *pte>
pte_to_pagemap_entry()
                                          remove_migration_ptes()
                                          unlock_page()
    if(is_migration_entry())
        migration_entry_to_page()
            BUG_ON(!PageLocked(page))

Also lockless read might be non-atomic if pte is larger than wordsize.
Other pte walkers (smaps, numa_maps, clear_refs) already lock ptes.

Fixes: 052fb0d6 ("proc: report file/anon bit in /proc/pid/pagemap")
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[3.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the more generic get_user_pages_unlocked which has the additional
benefit of passing FAULT_FLAG_ALLOW_RETRY at the very first page fault
(which allows the first page fault in an unmapped area to be always able
to block indefinitely by being allowed to release the mmap_sem).
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NAndres Lagar-Cavilla <andreslc@google.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to
the page fault in order to release the mmap_sem during the I/O.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows the get_user_pages_fast slow path to release the mmap_sem
before blocking.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some callers (like KVM) may want to set the gup_flags like FOLL_HWPOSION
to get a proper -EHWPOSION retval instead of -EFAULT to take a more
appropriate action if get_user_pages runs into a memory failure.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for
reading to reduce the mmap_sem contention (for writing), like while
waiting for I/O completion.  The problem is that right now practically no
get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging
that nifty feature.

Andres fixed it for the KVM page fault.  However get_user_pages_fast
remains uncovered, and 99% of other get_user_pages aren't using it either
(the only exception being FOLL_NOWAIT in KVM which is really nonblocking
and in fact it doesn't even release the mmap_sem).

So this patchsets extends the optimization Andres did in the KVM page
fault to the whole kernel.  It makes most important places (including
gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times
during I/O.

The only few places that remains uncovered are drivers like v4l and other
exceptions that tends to work on their own memory and they're not working
on random user memory (for example like O_DIRECT that uses gup_fast and is
fully covered by this patch).

A follow up patch should probably also add a printk_once warning to
get_user_pages that should go obsolete and be phased out eventually.  The
"vmas" parameter of get_user_pages makes it fundamentally incompatible
with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the
mmap_sem is released).

While this is just an optimization, this becomes an absolute requirement
for the userfaultfd feature http://lwn.net/Articles/615086/ .

The userfaultfd allows to block the page fault, and in order to do so I
need to drop the mmap_sem first.  So this patch also ensures that all
memory where userfaultfd could be registered by KVM, the very first fault
(no matter if it is a regular page fault, or a get_user_pages) always has
FAULT_FOLL_ALLOW_RETRY set.  Then the userfaultfd blocks and it is waken
only when the pagetable is already mapped.  The second fault attempt after
the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry
without it.

This patch (of 5):

We can leverage the VM_FAULT_RETRY functionality in the page fault paths
better by using either get_user_pages_locked or get_user_pages_unlocked.

The former allows conversion of get_user_pages invocations that will have
to pass a "&locked" parameter to know if the mmap_sem was dropped during
the call.  Example from:

    down_read(&mm->mmap_sem);
    do_something()
    get_user_pages(tsk, mm, ..., pages, NULL);
    up_read(&mm->mmap_sem);

to:

    int locked = 1;
    down_read(&mm->mmap_sem);
    do_something()
    get_user_pages_locked(tsk, mm, ..., pages, &locked);
    if (locked)
        up_read(&mm->mmap_sem);

The latter is suitable only as a drop in replacement of the form:

    down_read(&mm->mmap_sem);
    get_user_pages(tsk, mm, ..., pages, NULL);
    up_read(&mm->mmap_sem);

into:

    get_user_pages_unlocked(tsk, mm, ..., pages);

Where tsk, mm, the intermediate "..." paramters and "pages" can be any
value as before.  Just the last parameter of get_user_pages (vmas) must be
NULL for get_user_pages_locked|unlocked to be usable (the latter original
form wouldn't have been safe anyway if vmas wasn't null, for the former we
just make it explicit by dropping the parameter).

If vmas is not NULL these two methods cannot be used.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NAndres Lagar-Cavilla <andreslc@google.com>
Reviewed-by: NPeter Feiner <pfeiner@google.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous commit ("mm/thp: Allocate transparent hugepages on local
node") introduced alloc_hugepage_vma() to mm/mempolicy.c to perform a
special policy for THP allocations.  The function has the same interface
as alloc_pages_vma(), shares a lot of boilerplate code and a long
comment.

This patch merges the hugepage special case into alloc_pages_vma.  The
extra if condition should be cheap enough price to pay.  We also prevent
a (however unlikely) race with parallel mems_allowed update, which could
make hugepage allocation restart only within the fallback call to
alloc_hugepage_vma() and not reconsider the special rule in
alloc_hugepage_vma().

Also by making sure mpol_cond_put(pol) is always called before actual
allocation attempt, we can use a single exit path within the function.

Also update the comment for missing node parameter and obsolete reference
to mm_sem.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This make sure that we try to allocate hugepages from local node if
allowed by mempolicy.  If we can't, we fallback to small page allocation
based on mempolicy.  This is based on the observation that allocating
pages on local node is more beneficial than allocating hugepages on remote
node.

With this patch applied we may find transparent huge page allocation
failures if the current node doesn't have enough freee hugepages.  Before
this patch such failures result in us retrying the allocation on other
nodes in the numa node mask.

[akpm@linux-foundation.org: fix comment, add CONFIG_TRANSPARENT_HUGEPAGE dependency]
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compaction deferring logic is heavy hammer that block the way to the
compaction.  It doesn't consider overall system state, so it could prevent
user from doing compaction falsely.  In other words, even if system has
enough range of memory to compact, compaction would be skipped due to
compaction deferring logic.  This patch add new tracepoint to understand
work of deferring logic.  This will also help to check compaction success
and fail.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is not well analyzed that when/why compaction start/finish or not.
With these new tracepoints, we can know much more about start/finish
reason of compaction.  I can find following bug with these tracepoint.

http://www.spinics.net/lists/linux-mm/msg81582.htmlSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It'd be useful to know current range where compaction work for detailed
analysis.  With it, we can know pageblock where we actually scan and
isolate, and, how much pages we try in that pageblock and can guess why it
doesn't become freepage with pageblock order roughly.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We now have tracepoint for begin event of compaction and it prints start
position of both scanners, but, tracepoint for end event of compaction
doesn't print finish position of both scanners.  It'd be also useful to
know finish position of both scanners so this patch add it.  It will help
to find odd behavior or problem on compaction internal logic.

And mode is added to both begin/end tracepoint output, since according to
mode, compaction behavior is quite different.

And lastly, status format is changed to string rather than status number
for readability.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To check the range that compaction is working, tracepoint print
start/end pfn of zone and start pfn of both scanner with decimal format.
Since we manage all pages in order of 2 and it is well represented by
hexadecimal, this patch change the tracepoint format from decimal to
hexadecimal.  This would improve readability.  For example, it makes us
easily notice whether current scanner try to compact previously
attempted pageblock or not.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Helper account_page_redirty() fixes dirty pages counter for redirtied
pages.  This patch puts it after dirtying and prevents temporary
underflows of dirtied pages counters on zone/bdi and current->nr_dirtied.
Signed-off-by: NKonstantin Khebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The problem is that we check nr_ptes/nr_pmds in exit_mmap() which happens
*before* pgd_free().  And if an arch does pte/pmd allocation in
pgd_alloc() and frees them in pgd_free() we see offset in counters by the
time of the checks.

We tried to workaround this by offsetting expected counter value according
to FIRST_USER_ADDRESS for both nr_pte and nr_pmd in exit_mmap().  But it
doesn't work in some cases:

1. ARM with LPAE enabled also has non-zero USER_PGTABLES_CEILING, but
   upper addresses occupied with huge pmd entries, so the trick with
   offsetting expected counter value will get really ugly: we will have
   to apply it nr_pmds, but not nr_ptes.

2. Metag has non-zero FIRST_USER_ADDRESS, but doesn't do allocation
   pte/pmd page tables allocation in pgd_alloc(), just setup a pgd entry
   which is allocated at boot and shared accross all processes.

The proposal is to move the check to check_mm() which happens *after*
pgd_free() and do proper accounting during pgd_alloc() and pgd_free()
which would bring counters to zero if nothing leaked.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NTyler Baker <tyler.baker@linaro.org>
Tested-by: NTyler Baker <tyler.baker@linaro.org>
Tested-by: NNishanth Menon <nm@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup.  The trick is to allocate a lot of PMD page tables.  Linux
kernel doesn't account PMD tables to the process, only PTE.

The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low.  oom_score for the process will be 0.

	#include <errno.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/mman.h>
	#include <sys/prctl.h>

	#define PUD_SIZE (1UL << 30)
	#define PMD_SIZE (1UL << 21)

	#define NR_PUD 130000

	int main(void)
	{
		char *addr = NULL;
		unsigned long i;

		prctl(PR_SET_THP_DISABLE);
		for (i = 0; i < NR_PUD ; i++) {
			addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
			if (addr == MAP_FAILED) {
				perror("mmap");
				break;
			}
			*addr = 'x';
			munmap(addr, PMD_SIZE);
			mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
			if (addr == MAP_FAILED)
				perror("re-mmap"), exit(1);
		}
		printf("PID %d consumed %lu KiB in PMD page tables\n",
				getpid(), i * 4096 >> 10);
		return pause();
	}

The patch addresses the issue by account PMD tables to the process the
same way we account PTE.

The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:

 - HugeTLB can share PMD page tables. The patch handles by accounting
   the table to all processes who share it.

 - x86 PAE pre-allocates few PMD tables on fork.

 - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
   check on exit(2).

Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded).  As with nr_ptes we use per-mm counter.  The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ARM uses custom implementation of PMD folding in 2-level page table case.
Generic code expects to see __PAGETABLE_PMD_FOLDED to be defined if PMD is
folded, but ARM doesn't do this.  Let's fix it.

Defining __PAGETABLE_PMD_FOLDED will drop out unused __pmd_alloc().  It
also fixes problems with recently-introduced pmd accounting on ARM without
LPAE.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NNishanth Menon <nm@ti.com>
Reported-by: NSimon Horman <horms@verge.net.au>
Tested-by: NSimon Horman <horms+renesas@verge.net.au>
Tested-by: NFabio Estevam <festevam@gmail.com>
Tested-by: NFelipe Balbi <balbi@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Tested-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If an architecure uses <asm-generic/4level-fixup.h>, build fails if we
try to use PUD_SHIFT in generic code:

   In file included from arch/microblaze/include/asm/bug.h:1:0,
                    from include/linux/bug.h:4,
                    from include/linux/thread_info.h:11,
                    from include/asm-generic/preempt.h:4,
                    from arch/microblaze/include/generated/asm/preempt.h:1,
                    from include/linux/preempt.h:18,
                    from include/linux/spinlock.h:50,
                    from include/linux/mmzone.h:7,
                    from include/linux/gfp.h:5,
                    from include/linux/slab.h:14,
                    from mm/mmap.c:12:
   mm/mmap.c: In function 'exit_mmap':
>> mm/mmap.c:2858:46: error: 'PUD_SHIFT' undeclared (first use in this function)
       round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);
                                                 ^
   include/asm-generic/bug.h:86:25: note: in definition of macro 'WARN_ON'
     int __ret_warn_on = !!(condition);    \
                            ^
   mm/mmap.c:2858:46: note: each undeclared identifier is reported only once for each function it appears in
       round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);
                                                 ^
   include/asm-generic/bug.h:86:25: note: in definition of macro 'WARN_ON'
     int __ret_warn_on = !!(condition);    \
                            ^
As with <asm-generic/pgtable-nopud.h>, let's define PUD_SHIFT to
PGDIR_SHIFT.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LKP has triggered a compiler warning after my recent patch "mm: account
pmd page tables to the process":

    mm/mmap.c: In function 'exit_mmap':
 >> mm/mmap.c:2857:2: warning: right shift count >= width of type [enabled by default]

The code:

 > 2857                WARN_ON(mm_nr_pmds(mm) >
   2858                                round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);

In this, on tile, we have FIRST_USER_ADDRESS defined as 0.  round_up() has
the same type -- int.  PUD_SHIFT.

I think the best way to fix it is to define FIRST_USER_ADDRESS as unsigned
long.  On every arch for consistency.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Microblaze uses custom implementation of PMD folding, but doesn't define
__PAGETABLE_PMD_FOLDED, which generic code expects to see.  Let's fix it.

Defining __PAGETABLE_PMD_FOLDED will drop out unused __pmd_alloc().  It
also fixes problems with recently-introduced pmd accounting.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The swap controller code is scattered all over the file.  Gather all
the code that isn't directly needed by the memory controller at the
end of the file in its own CONFIG_MEMCG_SWAP section.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Reviewed-by: NVladimir Davydov <vdavydov@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The initialization code for the per-cpu charge stock and the soft
limit tree is compact enough to inline it into mem_cgroup_init().
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NVladimir Davydov <vdavydov@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>