Devices manufactured by NCR have userspace hiddev-based drivers,
which do all the necessary device querying by themselves. The devices
must not be queried directly by the generic HID driver, as reported by
NCR engineers.

Cc: Petr Ostadal <postadal@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from
consumer page (reserved in HUT 1.12) for back and more keys. It also emits
a few usages from LOGIVENDOR page, which need adding.

Also, this device has broken report descriptor - the reported maximum is too
low - it doesn't contain the range for 'back' and 'more' keys, so we need to
bump it up before the report descriptor is being parsed.

Besides all this, it also requires NOGET quirk.

This patch does so.

[1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=enSigned-off-by: NJiri Kosina <jkosina@suse.cz>

This patch provides support for the Gameron dual psx adaptor.  The
modification  is to add the quirk HID_QUIRK_MULTI_INPUT for this
specific USB device.
Signed-off-by: NJulien Eyries <jeyries@yahoo.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microsoft SideWinder GameVoice driver is a trivial device with a few buttons
(0x09 HID usage) and an audio connector, which just forwards the audio input
into oridinary sound card present in the computer.

Despite this fact, the only interface of this device reports itself as a
Telephony/Headset type of HID device. This is apparently incorrect - the device
itself doesn't provide any audio/telephony functionality. This is achieved in
userland application which only needs to receive the button events from the HID
driver.

This patch establishes a new quirk which forces hid-input to claim a device it
will otherwise leave untouched.
Reported-by: NTomas Carnecky <tom@dbservice.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Logitech wheel (product id 0xc294) doesn't like to be polled for reports,
otherwise it slows down initialization of this device to ten seconds.

This patch adds HID_QUIRK_NOGET flag for this wheel.
Signed-off-by: NJan Kratochvil <honza@jikos.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Certain versions of Cypress USB barcode readers (this problem is known to
happen at least with PIDs 0xde61 and 0xde64) have report descriptor which
has swapped usage min and usage max tag. This results in HID parser failing
for report descriptor of these devices, as it (wrongly) requires allocating
more usages than HID_MAX_USAGES.

Solve this by walking through the report descriptor for such devices, and swap
the usage min and usage max items (and their values) to be in proper order.
Reported-by: NBret Towe <magnade@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

It turns out that there are broken devices out there that incorrectly
report VID/PID as 0x000, see http://lkml.org/lkml/2007/4/27/496

Therefore we should not confuse users by dumping warnings and stacktraces
in such situation. It is not possible to add quirks for such horribly
broken devices, but currently that's not needed.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add a 'quirks' module parameter for the usbhid module, so users can
add or modify quirks at module load time.
Signed-off-by: NPaul Walmsley <paul@booyaka.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add internal support for dynamically-allocated HID quirks, "dquirks"
(for "dynamic quirks").  Includes several functions to add/modify quirks
from the list.  This code is used by the next patch to implement quirk
modification upon module load.
Signed-off-by: NPaul Walmsley <paul@booyaka.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rename existing quirks handling code that operates over a static array
to "squirks" (short for static quirks) to differentiate it from the
dynamically-allocated quirks that will be introduced in the
next patch.  Add an accessor function specifically for static quirks,
usbhid_exists_squirk().
Signed-off-by: NPaul Walmsley <paul@booyaka.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move the USB_VENDOR* and USB_DEVICE* defines and the hid_blacklist[]
array there from hid-core.c.  Add
hid-quirks.c:usbhid_lookup_any_quirks() to return quirk information to
hid-core.c.  Convert __u32, __u16 types to u32, u16.
Signed-off-by: NPaul Walmsley <paul@booyaka.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>