- 11 2月, 2008 2 次提交
-
-
由 Matthew Wilcox 提交于
We want to allow different implementations of pci_raw_ops for standard and extended config space on x86. Rather than clutter generic code with knowledge of this, we make pci_raw_ops private to x86 and use it to implement the new raw interface -- raw_pci_read() and raw_pci_write(). Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
Thanks to Loic Prylli <loic@myri.com>, who originally proposed this idea. Always using legacy configuration mechanism for the legacy config space and extended mechanism (mmconf) for the extended config space is a simple and very logical approach. It's supposed to resolve all known mmconf problems. It still allows per-device quirks (tweaking dev->cfg_size). It also allows to get rid of mmconf fallback code. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 2月, 2008 28 次提交
-
-
由 S.Çağlar Onur 提交于
Signed-off-by: NS.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
Right now, we check only the first 4k page for static required protections. This does not take overlapping regions into account. So we might end up setting the wrong permissions/protections for other parts of this large page. This can be optimized further, but correctness is the important part. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Now, that the page pool is in place we can enable DEBUG_PAGEALLOC on 64bit. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Switch the split page code to use the page pool. We do this unconditionally to avoid different behaviour with and without DEBUG_PAGEALLOC enabled. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup hardcoded reliance on PSE pages, and the unrobustness of the runtime splitup of large pages. The splitup ended in recursive calls to alloc_pages() when a page for a pte split was requested. Avoid the recursion with a preallocated page pool, which is used to split up large mappings and gets refilled in the return path of kernel_map_pages after the split has been done. The size of the page pool is adjusted to the available memory. This part just implements the page pool and the initialization w/o using it yet. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Rafael J. Wysocki 提交于
In some suspend and hibernation files in arch/x86/power there are comments referring to arch/x86-64 and arch/i386 . Update them to reflect the current code layout. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rafael J. Wysocki 提交于
Move the hibernation-specific code from arch/x86/power/suspend_64.c to a separate file (hibernate_64.c) and the CPU-handling code to cpu_64.c (in line with the corresponding 32-bit code). Simplify arch/x86/power/Makefile . Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rafael J. Wysocki 提交于
Rename cpu.c, suspend.c and swsusp.S in arch/x86/power to cpu_32.c, hibernate_32.c and hibernate_asm_32.S, respectively, and update the purpose and copyright information in these files. Update the Makefile in arch/x86/power to reflect the above changes. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rafael J. Wysocki 提交于
Move arch/x86/kernel/suspend_64.c to arch/x86/power . Move arch/x86/kernel/suspend_asm_64.S to arch/x86/power as hibernate_asm_64.S . Update purpose and copyright information in arch/x86/power/suspend_64.c and arch/x86/power/hibernate_asm_64.S . Update the Makefiles in arch/x86, arch/x86/kernel and arch/x86/power to reflect the above changes. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Denys Vlasenko 提交于
In arch/x86/boot/printf.c gets rid of unused tail of digits: const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz"; (we are using 0-9a-f only) Uses smaller/faster lowercasing (by ORing with 0x20) if we know that we work on numbers/digits. Makes strtoul smaller, and also we are getting rid of static const char small_digits[] = "0123456789abcdefx"; static const char large_digits[] = "0123456789ABCDEFX"; since this works equally well: static const char digits[16] = "0123456789ABCDEF"; Size savings: $ size vmlinux.org vmlinux text data bss dec hex filename 877320 112252 90112 1079684 107984 vmlinux.org 877048 112252 90112 1079412 107874 vmlinux It may be also a tiny bit faster because code has less branches now, but I doubt it is measurable. [ hugh@veritas.com: uppercase pointers fix ] Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ian Campbell 提交于
Some important parts of f6df72e7 got dropped along the way, reintroduce them. Only affects paravirt guests. Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ian Campbell 提交于
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled kernel are in PAE format. early_ioremap is updated to use the standard page table accessors. Clear any mappings beyond max_low_pfn from the boot page tables in native_pagetable_setup_start because the initial mappings can extend beyond the range of physical memory and into the vmalloc area. Derived from patches by Eric Biederman and H. Peter Anvin. [ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ] Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Other than the defconfigs, remove the entry in compiler-gcc4.h, Kconfig.debug and feature-removal-schedule.txt. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
arch/x86/kernel/topology.c:56:2: warning: returning void-valued expression Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Adjust the definition of lookup_address to take an unsigned long level argument. Adjust callers in xen/mmu.c that pass in a dummy variable. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
arch/x86/kernel/cpu/mcheck/therm_throt.c:121:2: warning: returning void-valued expression Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Use xen_khz to denote xen_specific clock speed. Avoid shadowing cpu_khz. arch/x86/xen/time.c:220:6: warning: symbol 'cpu_khz' shadows an earlier one include/asm/tsc.h:17:21: originally declared here Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arnd Hannemann 提交于
Signed-off-by: NArnd Hannemann <hannemann@i4.informatik.rwth-aachen.de> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jordan Crouse 提交于
Each AMD Geode MFGPT timer interrupt output is paired with another timer; esentially the interrupt goes if either timer fires. This is okay, but the handlers need to be aware of this. Make sure in the timer tick handler that our timer really did expire. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
We *really* don't want to be reading MFGPTx_SETUP and writing back those values. What we want to be doing is clearing CMP1 and CMP2 unconditionally; otherwise, we have races where CMP1 and/or CMP2 fire after we've read MFGPTx_SETUP. They can also fire between when we've written ~CNTEN to the register, and when the new register values get copied to the timer's version of the register. By clearing both fields, we're okay. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jordan Crouse 提交于
There isn't much value to always detecting the MFGPT timers on Geode platforms; detection is only needed when something wants to use the timers. Move the detection code so that it gets called the first time a timer is allocated. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
We need to be called from elsewhere, and this gets some #ifdefs out of the .c file. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
Drop F_AVAIL and the 'flags' field, replacing with an 'avail' bit. This looks more understandable to me. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
We had planned to use the 'owner' field for allowing re-allocation of MFGPTs; however, doing it by module owner name isn't flexible enough. So, drop this for now. If it turns out that we need timers in modules, we'll need to come up with a scheme that matches the write-once fields of the MFGPTx_SETUP register, and drops ponies from the sky. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Willy Tarreau 提交于
The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards run on a 32.768 kHz digital watch crystal. In practise, it will not change the timer's frequency as the skew was only 2.4%, but it should provide more accurate intervals. Signed-off-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
- uninline timer functions; the compiler knows better than we do whether or not to inline these. - mfgpt_start_timer() had an unused 'clock' argument, drop it. From both Jordan and myself. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 09 2月, 2008 7 次提交
-
-
由 Sam Ravnborg 提交于
To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NRussell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Venki Pallipadi 提交于
The last posted version of this patch gave compile error on IA64. So, here goes yet another rewrite of the patch. Convert cpu_idle_wait() to cpuidle_kick_cpus() which is SMP-only, and gives error on non supported CPU. Changes from last patch sent by Kevin: Moved the definition of kick_cpus back to cpuidle.c from cpuidle.h: * Having it in .h gives #error on archs which includes the header file without actually having CPU_IDLE configured. To make it work in .h, we need one more #ifdef around that code which makes it messy. * Also, the function is only called from one file. So, it can be in declared statically in .c rather than making it available to everyone who includes the .h file. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NKevin Hilman <khilman@mvista.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Martin Schwidefsky 提交于
Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Remove now unnecessary inclusions of {asm,linux}/a.out.h. [akpm@linux-foundation.org: fix alpha build] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set. Not all architectures support the A.OUT binfmt, so the ELF binfmt should not be permitted to go looking for A.OUT libraries to load in such a case. Not only that, but under such conditions A.OUT core dumps are not produced either. To make this work, this patch also does the following: (1) Makes the existence of the contents of linux/a.out.h contingent on CONFIG_ARCH_SUPPORTS_AOUT. (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT core dumping code. (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This is then included only where needed. This means that this bit of arch code will be stored in the appropriate A.OUT binfmt module rather than the core kernel. (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not needed) and FRV. This patch depends on the previous patch to move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. [jdike@addtoit.com: uml: re-remove accidentally restored code] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Mark arches that support A.OUT format by including the following in their master Kconfig files: config ARCH_SUPPORTS_AOUT def_bool y This should also be set if the arch provides compatibility A.OUT support for an older arch, for instance x86_64 for i386 or sparc64 for sparc. I've guessed at which arches don't, based on comments in the code, however I'm sure that some of the ones I've marked as 'yes' actually should be 'no'. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
Fix typo in comments. BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise checkpatch.pl will be complaining. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2008 3 次提交
-
-
由 Christoph Lameter 提交于
Provide an alternate implementation of the SLUB fast paths for alloc and free using cmpxchg_local. The cmpxchg_local fast path is selected for arches that have CONFIG_FAST_CMPXCHG_LOCAL set. An arch should only set CONFIG_FAST_CMPXCHG_LOCAL if the cmpxchg_local is faster than an interrupt enable/disable sequence. This is known to be true for both x86 platforms so set FAST_CMPXCHG_LOCAL for both arches. Currently another requirement for the fastpath is that the kernel is compiled without preemption. The restriction will go away with the introduction of a new per cpu allocator and new per cpu operations. The advantages of a cmpxchg_local based fast path are: 1. Potentially lower cycle count (30%-60% faster) 2. There is no need to disable and enable interrupts on the fast path. Currently interrupts have to be disabled and enabled on every slab operation. This is likely avoiding a significant percentage of interrupt off / on sequences in the kernel. 3. The disposal of freed slabs can occur with interrupts enabled. The alternate path is realized using #ifdef's. Several attempts to do the same with macros and inline functions resulted in a mess (in particular due to the strange way that local_interrupt_save() handles its argument and due to the need to define macros/functions that sometimes disable interrupts and sometimes do something else). [clameter: Stripped preempt bits and disabled fastpath if preempt is enabled] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Bradley Smith 提交于
Adds i8k driver to the x86_64 Kconfig. Signed-off-by: NBradley Smith <bradjsmith@btinternet.com> Cc: Frank Sorenson <frank@tuxrocks.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H. Peter Anvin 提交于
struct user.u_ar0 is defined to contain a pointer offset on all architectures in which it is defined (all architectures which define an a.out format except SPARC.) However, it has a pointer type in the headers, which is pointless -- <asm/user.h> is not exported to userspace, and it just makes the code messy. Redefine the field as "unsigned long" (which is the same size as a pointer on all Linux architectures) and change the setting code to user offsetof() instead of hand-coded arithmetic. Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Håvard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-