This changes the behavier of MTD_OOB_RAW. It used to read both OOB and 
data to the data buffer, however you would still need to specify the 
dummy oob buffer.

This is only used in one place, but makes it hard to read data+oob 
without ECC test, thus I removed that behavier, and fixed the user.

Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC 
validation
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds an ability to export sysfs attributes below
the block disk device.

This can be used to pass the udev an information about the FTL
and could include the vendor, serial, version, etc...
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

* Add locking where it was missing.

* Don't do a get_mtd_device in blktrans_open because it would lead to a
  deadlock; instead do that in add_mtd_blktrans_dev.

* Only free the mtd_blktrans_dev structure when the last user exits.

* Flush request queue on device removal.

* Track users, and call tr->release in del_mtd_blktrans_dev
  Due to that ->open and release aren't called more that once.

Now it is safe to call del_mtd_blktrans_dev while the device is still in use.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is the biggest change. To make hotplug possible, and this layer 
clean, the mtd_blktrans_dev now contains everything for a single mtd 
block translation device. Also removed some very old leftovers.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Use these only if you know that you already hold mtd_table_mutex
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Move MANUFACTURER_MACRONIX and MANUFACTURER_SST definitions to the
include/linux/mtd/cfi.h header file and rename them to CFI_MFR_MACRONIX and
CFI_MFR_SST.

All references in drivers/mtd/chips/cfi_cmdset_0002.c are updated to reflect
this.
Signed-off-by: NGuillaume LECERF <glecerf@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add nand lock / unlock routines. At least 'micron' parts
support this.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14995Reported-by: NR. Diez <rdiezmail-kernelbugzilla@yahoo.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In the inline function cfi_build_cmd_addr, the cast of cmd_ofs to an
uint8_t produces a sparse warning of the type:

warning: cast truncates bits from constant value (2aa becomes aa)

Quiet the warning by masking cmd_ofs with 0xff and remove the cast.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if
panic_on_oops is set, so the kernel log buffer is not stored
for this case.

This patch adds a KMSG_DUMP_KEXEC dump type which gets called
when crash_kexec() is invoked. To avoid getting double dumps,
the old KMSG_DUMP_PANIC is moved below crash_kexec(). The
mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the
same way as a panic.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NSimon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Use bitmap library and kill some unused iommu helper functions.

1. s/iommu_area_free/bitmap_clear/

2. s/iommu_area_reserve/bitmap_set/

3. Use bitmap_find_next_zero_area instead of find_next_zero_area

  This cannot be simple substitution because find_next_zero_area
  doesn't check the last bit of the limit in bitmap

4. Remove iommu_area_free, iommu_area_reserve, and find_next_zero_area
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This introduces new bitmap functions:

bitmap_set: Set specified bit area
bitmap_clear: Clear specified bit area
bitmap_find_next_zero_area: Find free bit area

These are mostly stolen from iommu helper. The differences are:

- Use find_next_bit instead of doing test_bit for each bit

- Rewrite bitmap_set and bitmap_clear

  Instead of setting or clearing for each bit.

- Check the last bit of the limit

  iommu-helper doesn't want to find such area

- The return value if there is no zero area

  find_next_zero_area in iommu helper: returns -1
  bitmap_find_next_zero_area: return >= bitmap size
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

resource_size() doesn't change the resource it operates on, so the res
parameter can be marked const.  Same for resource_type().
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the locking in blockdev_direct_IO is a mess, we have three
different locking types and very confusing checks for some of them.  The
most complicated one is DIO_OWN_LOCKING for reads, which happens to not
actually be used.

This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read
case is unused anyway, and the write side is almost identical to
DIO_NO_LOCKING.  The difference is that DIO_NO_LOCKING always sets the
create argument for the get_blocks callback to zero, but we can easily
move that to the actual get_blocks callbacks.  There are four users of the
DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is
fine with the new version, ocfs2 only errors out if create were ever set,
and we can remove this dead code now, the block device code only ever uses
create for an error message if we are fully beyond the device which can
never happen, and last but not least XFS will need the new behavour for
writes.

Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag.  Separate out the check for not allowing to fill holes into a
separate flag, although for now both flags always get set at the same
time.

Also revamp the documentation of the locking scheme to actually make
sense.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't know the reason, but it appears ki_wait field of iocb never gets used.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement shrinking the reserved memory for crash kernel, if it is more
than enough.

For example, if you have already reserved 128M, now you just want 100M,
you can do:

# echo $((100*1024*1024)) > /sys/kernel/kexec_crash_size

Note, you can only do this before loading the crash kernel.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have HARD_MSGMAX lower on 64bit than on 32bit, since usually 64bit
machines have more memory than 32bit machines.

Making it higher on 64bit seems reasonable, and keep the original number
on 32bit.
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Based on Nick's findings:

sysv sem has the concept of semaphore arrays that consist out of multiple
semaphores.  Atomic operations that affect multiple semaphores are
supported.

The patch is the first step for optimizing simple, single semaphore
operations: In addition to the global list of all pending operations, a
2nd, per-semaphore list with the simple operations is added.

Note: this patch does not make sense by itself, the new list is used
nowhere.
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kill force_sig_specific(), this trivial wrapper has no callers.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No changes in compiled code. The patch adds the new helper, si_fromuser()
and changes check_kill_permission() to use this helper.

The real effect of this patch is that from now we "officially" consider
SEND_SIG_NOINFO signal as "from user-space" signals. This is already true
if we look at the code which uses SEND_SIG_NOINFO, except __send_signal()
has another opinion - see the next patch.

The naming of these special SEND_SIG_XXX siginfo's is really bad
imho.  From __send_signal()'s pov they mean

	SEND_SIG_NOINFO		from user
	SEND_SIG_PRIV		from kernel
	SEND_SIG_FORCED		no info
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Reviewed-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggested by Roland.

Change tracehook_report_syscall_exit() to look at step flag and send the
trap signal if needed.

This change affects ia64, microblaze, parisc, powerpc, sh.  They pass
nonzero "step" argument to tracehook but since it was ignored the tracee
reports via ptrace_notify(), this is not right and not consistent.

	- PTRACE_SETSIGINFO doesn't work

	- if the tracer resumes the tracee with signr != 0 the new signal
	  is generated rather than delivering it

	- If PT_TRACESYSGOOD is set the tracee reports the wrong exit_code

I don't have a powerpc machine, but I think this test-case should see the
difference:

	#include <unistd.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <assert.h>
	#include <stdio.h>

	int main(void)
	{
		int pid, status;

		if (!(pid = fork())) {
			assert(ptrace(PTRACE_TRACEME) == 0);
			kill(getpid(), SIGSTOP);

			getppid();

			return 0;
		}

		assert(pid == wait(&status));
		assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACESYSGOOD) == 0);

		assert(ptrace(PTRACE_SYSCALL, pid, 0,0) == 0);
		assert(pid == wait(&status));

		assert(ptrace(PTRACE_SINGLESTEP, pid, 0,0) == 0);
		assert(pid == wait(&status));

		if (status == 0x57F)
			return 0;

		printf("kernel bug: status=%X shouldn't have 0x80\n", status);
		return 1;
	}
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggested by Roland.

Currently there is no way to synthesize a single-stepping trap in the
arch-independent manner.  This patch adds the default helper which fills
siginfo_t, arch/ can can override it.

Architetures which implement user_enable_single_step() should add
user_single_step_siginfo() also.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No functional changes.

ptrace_init_task() looks confusing, as if we always auto-attach when "bool
ptrace" argument is true, while in fact we attach only if current is
traced.

Make the code more explicit and kill now unused ptrace_link().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_move_parent() calls try_charge first and cancel_charge on
failure.  IMHO, charge/uncharge(especially charge) is high cost operation,
so we should avoid it as far as possible.

This patch tries to delay try_charge in mem_cgroup_move_parent() by
re-ordering checks it does.

And this patch renames mem_cgroup_move_account() to
__mem_cgroup_move_account(), changes the return value of
__mem_cgroup_move_account() from int to void, and adds a new
wrapper(mem_cgroup_move_account()), which checks whether a @pc is valid
for moving account and calls __mem_cgroup_move_account().

This patch removes the last caller of trylock_page_cgroup(), so removes
its definition too.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In global VM, FILE_MAPPED is used but memcg uses MAPPED_FILE.  This makes
grep difficult.  Replace memcg's MAPPED_FILE with FILE_MAPPED

And in global VM, mapped shared memory is accounted into FILE_MAPPED.
But memcg doesn't. fix it.
Note:
  page_is_file_cache() just checks SwapBacked or not.
  So, we need to check PageAnon.

Cc: Balbir Singh <balbir@in.ibm.com>
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In massive parallel enviroment, res_counter can be a performance
bottleneck.  One strong techinque to reduce lock contention is reducing
calls by coalescing some amount of calls into one.

Considering charge/uncharge chatacteristic,
	- charge is done one by one via demand-paging.
	- uncharge is done by
		- in chunk at munmap, truncate, exit, execve...
		- one by one via vmscan/paging.

It seems we have a chance to coalesce uncharges for improving scalability
at unmap/truncation.

This patch is a for coalescing uncharge.  For avoiding scattering memcg's
structure to functions under /mm, this patch adds memcg batch uncharge
information to the task.  A reason for per-task batching is for making use
of caller's context information.  We do batched uncharge (deleyed
uncharge) when truncation/unmap occurs but do direct uncharge when
uncharge is called by memory reclaim (vmscan.c).

The degree of coalescing depends on callers
  - at invalidate/trucate... pagevec size
  - at unmap ....ZAP_BLOCK_SIZE
(memory itself will be freed in this degree.)
Then, we'll not coalescing too much.

On x86-64 8cpu server, I tested overheads of memcg at page fault by
running a program which does map/fault/unmap in a loop. Running
a task per a cpu by taskset and see sum of the number of page faults
in 60secs.

[without memcg config]
  40156968  page-faults              #      0.085 M/sec   ( +-   0.046% )
  27.67 cache-miss/faults
[root cgroup]
  36659599  page-faults              #      0.077 M/sec   ( +-   0.247% )
  31.58 miss/faults
[in a child cgroup]
  18444157  page-faults              #      0.039 M/sec   ( +-   0.133% )
  69.96 miss/faults
[child with this patch]
  27133719  page-faults              #      0.057 M/sec   ( +-   0.155% )
  47.16 miss/faults

We can see some amounts of improvement.
(root cgroup doesn't affected by this patch)
Another patch for "charge" will follow this and above will be improved more.

Changelog(since 2009/10/02):
 - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes)
 - some clean up and commentary/description updates.
 - added initialize code to copy_process(). (possible bug fix)

Changelog(old):
 - fixed !CONFIG_MEM_CGROUP case.
 - rebased onto the latest mmotm + softlimit fix patches.
 - unified patch for callers
 - added commetns.
 - make ->do_batch as bool.
 - removed css_get() at el. We don't need it.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* small define cleanup in header
* fix #ifdeffery in procfs.c via Kconfig
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/proc/fs/reiserfs/version is on the way of removing ->read_proc interface.
 It's empty however, so simply remove it instead of doing dummy
conversion.  It's hard to see what information userspace can extract from
empty file.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch provides the acceleration entry points for the SM501
framebuffer driver.

This patch provides the sync, copyarea and fillrect entry points, using
the SM501's 2D acceleration engine to perform the operations in-chip
rather than across the bus.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk>
Signed-off-by: NVincent Sanders <vince@simtec.co.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drivers may use gpiolib sysfs as part of their public user space
interface. The GPIO number and polarity might change from board to
board. The gpio_export_link() call can be used to hide the GPIO number
from user space. Add support for also hiding the GPIO line polarity
changes from user space.
Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A GPIO driver for the Timberdale FPGA found on the Intel Atom board
Russellville.

The GPIO driver also has an IRQ-chip to support interrupts on the pins.
Signed-off-by: NRichard Röjfors <richard.rojfors@mocean-labs.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix node-oriented allocation handling in oom-kill.c I myself think of this
as a bugfix not as an ehnancement.

In these days, things are changed as
  - alloc_pages() eats nodemask as its arguments, __alloc_pages_nodemask().
  - mempolicy don't maintain its own private zonelists.
  (And cpuset doesn't use nodemask for __alloc_pages_nodemask())

So, current oom-killer's check function is wrong.

This patch does
  - check nodemask, if nodemask && nodemask doesn't cover all
    node_states[N_HIGH_MEMORY], this is CONSTRAINT_MEMORY_POLICY.
  - Scan all zonelist under nodemask, if it hits cpuset's wall
    this faiulre is from cpuset.
And
  - modifies the caller of out_of_memory not to call oom if __GFP_THISNODE.
    This doesn't change "current" behavior. If callers use __GFP_THISNODE
    it should handle "page allocation failure" by itself.

  - handle __GFP_NOFAIL+__GFP_THISNODE path.
    This is something like a FIXME but this gfpmask is not used now.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hioryu@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 5ad64688 "ksm: let shared pages
be swappable" breaks the build on m68knommu and I suspect on any nommu:

  In file included from kernel/fork.c:52:
  include/linux/ksm.h:129: warning: 'enum ttu_flags' declared inside parameter list
  include/linux/ksm.h:129: warning: its scope is only this definition or declaration, which is probably not what you want
  include/linux/ksm.h:129: error: parameter 2 ('flags') has incomplete type
  make[1]: *** [kernel/fork.o] Error 1
  make[1]: *** Waiting for unfinished jobs....

Let's fix that with CONFIG_MMU around most of the !CONFIG_KSM declarations.
Reported-by: NSteven King <sfking@fdwdc.com>
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Tested-by: NSteven King <sfking@fdwdc.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 16-bit monochrome fourcc code has been previously abused for a 10-bit
format, add a new 10-bit code instead. Also add missing 8- and 10-bit Bayer
fourcc codes for completeness.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds the above APIs to the v4l2 core. This is based on version v1.2
of the RFC titled "V4L - Support for video timings at the input/output interface"
Following new ioctls are added:-

        - VIDIOC_ENUM_DV_PRESETS
        - VIDIOC_S_DV_PRESET
        - VIDIOC_G_DV_PRESET
        - VIDIOC_QUERY_DV_PRESET
        - VIDIOC_S_DV_TIMINGS
        - VIDIOC_G_DV_TIMINGS

Please refer to the RFC for the details. This code was tested using vpfe
capture driver on TI's DM365. Following is the test configuration used :-

Blu-Ray HD DVD source -> TVP7002 -> DM365 (VPFE) ->DDR

A draft version of the TVP7002 driver (currently being reviewed in the mailing
list) was used that supports V4L2_DV_1080I60 & V4L2_DV_720P60 presets.

A loopback video capture application was used for testing these APIs. This calls
following IOCTLS :-

 -  verify the new v4l2_input capabilities flag added
 -  Enumerate available presets using VIDIOC_ENUM_DV_PRESETS
 -  Set one of the supported preset using VIDIOC_S_DV_PRESET
 -  Get current preset using VIDIOC_G_DV_PRESET
 -  Detect current preset using VIDIOC_QUERY_DV_PRESET
 -  Using stub functions in tvp7002, verify VIDIOC_S_DV_TIMINGS
    and VIDIOC_G_DV_TIMINGS ioctls are received at the sub device.
 -  Tested on 64bit platform by Hans Verkuil
Signed-off-by: NMuralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement selftest feature as specified by chip manufacturer.  Control:
read selftest sysfs entry

Response: "OK x y z" or "FAIL x y z"

where x, y, and z are difference between selftest mode and normal mode.
Test is passed when values are within acceptance limit values.

Acceptance limits are provided via platform data.  See chip spesifications
for acceptance limits.  If limits are not properly set, OK / FAIL decision
is meaningless.  However, userspace application can still make decision
based on the numeric x, y, z values.

Selftest is meant for HW diagnostic purposes.  It is not meant to be
called during normal use of the chip.  It may cause false interrupt
events.  Selftest mode delays polling of the normal results but it doesn't
cause wrong values.  Chip must be in static state during selftest.  Any
acceration during the test causes most probably failure.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NÉric Piel <Eric.Piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the possibility to remap axes via platform data.  Function pointers
for resource setup and release purposes
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NÉric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jean Delvare <khali@linux-fr.org>
Cc:  "Trisal, Kalhan" <kalhan.trisal@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow the use of another DMA controller driver in atmel-mci sd/mmc driver.
 This adds a generic dma_slave pointer to the mci platform structure where
we can store DMA controller information.  In atmel-mci we use information
provided by this structure to initialize the driver (with new helper
functions that are architecture dependant).

This also adds at32/avr32 chip modifications to cope with this new access
method.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently, We marked strstrip() as must_check.  because it was frequently
misused and it should be checked.  However, we found one exception.
scsi/ipr.c intentionally ignore return value of strstrip.  Because it
wishes to keep the whitespace at the beginning.

Thus we need to keep with and without checked whitespace trim function.
This patch adds a new strim() and changes ipr.c to use it.

[akpm@linux-foundation.org: coding-style fixes]
Suggested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>