- 29 1月, 2008 3 次提交
-
-
由 Herbert Xu 提交于
The dst member nfheader_len is only used by IPv6. It's also currently creating a rather ugly alignment hole in struct dst. Therefore this patch moves it from there into struct rt6_info. It also reorders the fields in rt6_info to minimize holes. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Add raw drops counter for IPv4 in /proc/net/raw . Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
Support for network splice receive. Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2008 1 次提交
-
-
由 Rolf Manderscheid 提交于
An IPoIB subnet on an IB fabric that spans multiple IB subnets can't use link-local scope in multicast GIDs. The existing routines that map IP/IPv6 multicast addresses into IB link-level addresses hard-code the scope to link-local, and they also leave the partition key field uninitialised. This patch adds a parameter (the link-level broadcast address) to the mapping routines, allowing them to initialise both the scope and the P_Key appropriately, and fixes up the call sites. The next step will be to add a way to configure the scope for an IPoIB interface. Signed-off-by: NRolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 09 1月, 2008 4 次提交
-
-
由 Eric Dumazet 提交于
It seems commit fda9ef5d introduced a RCU protection for sk_filter(), without a rcu_dereference() Either we need a rcu_dereference(), either a comment should explain why we dont need it. I vote for the former. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
alg_key_len is the length in bits of the key, not in bytes. Best way to fix this is to move alg_len() function from net/xfrm/xfrm_user.c to include/net/xfrm.h, and to use it in xfrm_algo_clone() alg_len() is renamed to xfrm_alg_len() because of its global exposition. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
Both NetLabel and SELinux (other LSMs may grow to use it as well) rely on the 'iif' field to determine the receiving network interface of inbound packets. Unfortunately, at present this field is not preserved across a skb clone operation which can lead to garbage values if the cloned skb is sent back through the network stack. This patch corrects this problem by properly copying the 'iif' field in __skb_clone() and removing the 'iif' field assignment from skb_act_clone() since it is no longer needed. Also, while we are here, put the assignments in the same order as the offsets to reduce cacheline bounces. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The even should be called SCTP_AUTHENTICATION_INDICATION. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 12月, 2007 2 次提交
-
-
由 Stephen Hemminger 提交于
Move veth.h from net/ to linux/ since it is a user api, and add it to user header processing Kbuild. [ Use header-y as suggested by Sam Ravnborg. -DaveM ] Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Some users do "modprobe ip_conntrack hashsize=...". Since we have the module aliases this loads nf_conntrack_ipv4 and nf_conntrack, the hashsize parameter is unknown for nf_conntrack_ipv4 however and makes it fail. Allow to specify hashsize= for both nf_conntrack and nf_conntrack_ipv4. Note: the nf_conntrack message in the ringbuffer will display an incorrect hashsize since nf_conntrack is first pulled in as a dependency and calculates the size itself, then it gets changed through a call to nf_conntrack_set_hashsize(). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 12月, 2007 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
During accept/migrate the code attempts to copy the addresses from the parent endpoint to the new endpoint. However, if the parent was bound to a wildcard address, then we end up pointlessly copying all of the current addresses on the system. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
ip_rt_advice has been gone, so no need to keep prototype and debug message. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2007 1 次提交
-
-
由 Vlad Yasevich 提交于
SCTP-AUTH requires selection of CRYPTO, HMAC and SHA1 since SHA1 is a MUST requirement for AUTH. We also support SHA256, but that's optional, so fix the code to treat it as such. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 26 11月, 2007 1 次提交
-
-
由 Pavel Emelyanov 提交于
The inet_ehash_locks_alloc() looks like this: #ifdef CONFIG_NUMA if (size > PAGE_SIZE) x = vmalloc(...); else #endif x = kmalloc(...); Unlike it, the inet_ehash_locks_alloc() looks like this: #ifdef CONFIG_NUMA if (size > PAGE_SIZE) vfree(x); else #else kfree(x); #endif The error is obvious - if the NUMA is on and the size is less than the PAGE_SIZE we leak the pointer (kfree is inside the #else branch). Compiler doesn't warn us because after the kfree(x) there's a "x = NULL" assignment, so here's another (minor?) bug: we don't set x to NULL under certain circumstances. Boring explanation, I know... Patch explains it better. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 11月, 2007 1 次提交
-
-
由 Guillaume Chazarain 提交于
if (net_ratelimit()) IEEE80211_DEBUG_DROP(...) can pollute the logs with messages like: printk: 1 messages suppressed. printk: 2 messages suppressed. printk: 7 messages suppressed. if debugging information is disabled. These messages are printed by net_ratelimit(). Add a wrapper to net_ratelimit() that takes into account the log level, so that net_ratelimit() is called only when we really want to print something. Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 11月, 2007 4 次提交
-
-
由 Ilpo Jrvinen 提交于
When the abstraction functions got added, conversion here was made incorrectly. As a result, the skb may end up pointing to skb which got included to the probe skb and then was freed. For it to trigger, however, skb_transmit must fail sending as well. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Switch the remaining IPVS sysctl entries over to to use CTL_UNNUMBERED, I stronly doubt that anyone is using the sys_sysctl interface to these variables. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
sysctl table check failed: /net/ipv4/vs/lblc_expiration .3.5.21.19 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/lblcr_expiration .3.5.21.20 Missing strategy Switch these entried over to use CTL_UNNUMBERED as clearly the sys_syscal portion wasn't working. This is along the same lines as Christian Borntraeger's patch that fixes up entries with no stratergy in net/ipv4/ipvs/ip_vs_ctl.c Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Borntraeger 提交于
Running the latest git code I get the following messages during boot: sysctl table check failed: /net/ipv4/vs/drop_entry .3.5.21.4 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/drop_packet .3.5.21.5 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/secure_tcp .3.5.21.6 Missing strategy [...] sysctl table check failed: /net/ipv4/vs/sync_threshold .3.5.21.24 Missing strategy I removed the binary sysctl handler for those messages and also removed the definitions in ip_vs.h. The alternative would be to implement a proper strategy handler, but syscall sysctl is deprecated. There are other sysctl definitions that are commented out or work with the default sysctl_data strategy. I did not touch these. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2007 1 次提交
-
-
由 Herbert Xu 提交于
Indeed my previous change to alloc_pskb has made it possible for the TCP header to be misaligned iff the MTU is not a multiple of 4 (and less than a page). So I suspect the optimised IPsec MTU calculation is giving you just such an MTU :) This patch fixes it by changing alloc_pskb to make sure that the size is at least 32-bit aligned. This does not cause the problem fixed by the previous patch because max_header is always 32-bit aligned which means that in the SG/NOTSO case this will be a no-op. I thought about putting this in the callers but all the current callers are from TCP. If and when we get a non-TCP caller we can always create a TCP wrapper for this function and move the alignment over there. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2007 2 次提交
-
-
由 Pavel Emelyanov 提交于
The request_sock_queue's listen_opt is either vmalloc-ed or kmalloc-ed depending on the number of table entries. Thus it is expected to be handled properly on free, which is done in the reqsk_queue_destroy(). However the error path in inet_csk_listen_start() calls the lite version of reqsk_queue_destroy, called __reqsk_queue_destroy, which calls the kfree unconditionally. Fix this and move the __reqsk_queue_destroy into a .c file as it looks too big to be inline. As David also noticed, this is an error recovery path only, so no locking is required and the lopt is known to be not NULL. reqsk_queue_yank_listen_sk is also now only used in net/core/request_sock.c so we should move it there too. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
We round up the header size in sk_stream_alloc_pskb so that TSO packets get zero tail room. Unfortunately this rounding up is not coordinated with the select_size() function used by TCP to calculate the second parameter of sk_stream_alloc_pskb. As a result, we may allocate more than a page of data in the non-TSO case when exactly one page is desired. In fact, rounding up the head room is detrimental in the non-TSO case because it makes memory that would otherwise be available to the payload head room. TSO doesn't need this either, all it wants is the guarantee that there is no tail room. So this patch fixes this by adjusting the skb_reserve call so that exactly the requested amount (which all callers have calculated in a precise way) is made available as tail room. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2007 3 次提交
-
-
由 Denis V. Lunev 提交于
This patch reverts Eric's commit 2b008b0a It diets .text & .data section of the kernel if CONFIG_NET_NS is not set. This is safe after list operations cleanup. Signed-of-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The inetpeer.c tracks the LRU list of inet_perr-s, but makes it by hands. Use the list_head-s for this. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2007 6 次提交
-
-
由 Denis V. Lunev 提交于
This patch fixes a small memory leak. Default fib rules can be deleted by the user if the rule does not carry FIB_RULE_PERMANENT flag, f.e. by ip rule flush Such a rule will not be freed as the ref-counter has 2 on start and becomes clearly unreachable after removal. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This counter is _always_ modified under the unix_gc_lock spinlock, so its atomicity can be provided w/o additional efforts. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The driver operations set_ieee8021x(), set_port_auth() and set_privacy_invoked() are not used by any drivers, except set_privacy_invoked() they aren't even used by mac80211. Remove them at least until we need to support drivers with mac80211 that require getting this information. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This allows a driver to ask for a specific rate control algorithm. The rate control algorithm asked for must be registered and be available as a module or built-in. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Emelyanov 提交于
There are many places that get the dst entry, increase the __use counter and set the "lastuse" time stamp. Make a helper for this. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2007 3 次提交
-
-
由 Vlad Yasevich 提交于
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
SCTP-AUTH and future ADD-IP updates have a requirement to do additional verification of parameters and an ability to ABORT the association if verification fails. So, introduce additional return code so that we can clear signal a required action. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Convert the custom hash list traversals to use hlist functions. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 08 11月, 2007 4 次提交
-
-
由 Vlad Yasevich 提交于
This patch adds a tunable that will allow ADD_IP to work without AUTH for backward compatibility. The default value is off since the default value for ADD_IP is off as well. People who need to use ADD-IP with older implementations take risks of connection hijacking and should consider upgrading or turning this tunable on. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
After learning more about rcu, it looks like the ADD-IP hadling doesn't need to call call_rcu_bh. All the rcu critical sections use rcu_read_lock, so using call_rcu_bh is wrong here. Now, restore the local_bh_disable() code blocks and use normal call_rcu() calls. Also restore the missing return statement. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Commit d0ce9291 broke several retransmit cases including fast retransmit. The reason is that we should only delay by rto while doing retranmists as a result of a timeout. Retransmit as a result of path mtu discover, fast retransmit, or other evernts that should trigger immidiate retransmissions got broken. Also, since rto is doubled prior to marking of packets elegable for retransmission, we never marked correct chunks anyway. The fix is provide a reason for a given retransmission so that we can mark chunks appropriately and to save the old rto value to do comparisons against. All regressions tests passed with this code. Spotted by Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 07 11月, 2007 1 次提交
-
-
由 Eric Dumazet 提交于
As done two years ago on IP route cache table (commit 22c047cc) , we can avoid using one lock per hash bucket for the huge TCP/DCCP hash tables. On a typical x86_64 platform, this saves about 2MB or 4MB of ram, for litle performance differences. (we hit a different cache line for the rwlock, but then the bucket cache line have a better sharing factor among cpus, since we dirty it less often). For netstat or ss commands that want a full scan of hash table, we perform fewer memory accesses. Using a 'small' table of hashed rwlocks should be more than enough to provide correct SMP concurrency between different buckets, without using too much memory. Sizing of this table depends on num_possible_cpus() and various CONFIG settings. This patch provides some locking abstraction that may ease a future work using a different model for TCP/DCCP table. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-