- 08 6月, 2014 7 次提交
-
-
由 Mitch Williams 提交于
The correct format is %pM, not %pMAC. Change-ID: Idb335723a966fe56db3a72b9c07c08ca66f9db3c Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Clean up inconsistent log messages, mostly related to punctuation. Based on the dogma that "kernel messages are not sentences", remove all trailing periods. Reword a few of the messages to make them less sentence-like. Change-ID: Ibd849aa7623a77549b0709988c66ab05d1311472 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
This comment is just plain false. VF drivers require MSI-X or they won't get interrupts at all. Change-ID: Iaea5e30b6926948aa834a3c506d9a9223d9e3e29 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
We don't need to print log messages when we encounter an out-of-memory condition, as the allocator will do this for us. Also, remove a Tx hang message that duplicates the one emitted by the netdev layer, and a duplicate message in the watchdog. Change-ID: If2056e6135fe248f66ea939778f9895660f4d189 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Akeem G Abodunrin 提交于
1. There is no ixgbe_watchdog_task function in the driver, so change the comment to the correct function name, i40e_watchdog_subtask. 2. Remove num_msix_entries from interrupt set_up routine because it is never used. 3. Remove some TBD comments that are not needed. Change-ID: I37697a04007074b797f85fd83d626672e4df1ad1 Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Remove use of registers no longer supported. Change-ID: I9d27399091cea78a926489d94f958edd762f5a20 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
As reported by Eric Dumazet, the driver is not masking the right bits in the receive descriptor before it starts checking them. This patch extends the mask to allow for the right bits to be checked, and fixes the issue permanently via a define. CC: Eric Dumazet <eric.dumazet@gmail.com> Change-ID: I3274f7619057a950f468143e6d7e11b129f54655 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 07 6月, 2014 2 次提交
-
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 6月, 2014 13 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.4.3 and i40evf to 0.9.27. Change-ID: I4141e9f8615bdcfa3b1b5ecbc2ac62603a03b7ad Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Use an extra state variable to keep track of when the IRQs are fully set up. This keeps us from trying to unhook IRQs that already were left unhooked in a failed reset recovery, e.g. when firmware is broken. Change-ID: I073eb081e4ef8aedcbdf1ee0717c0ed64fa172f2 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
If a reset recovery failed (e.g. firmware is broken), the HMC space won't get set up. We don't need to try to delete it if it didn't get set up. This stops some needless error messages when we already know we need to just tear things down. Change-ID: Iac600481765e20b136052b43a544e55d7870268b Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The i40e driver should print link messages like all the other Intel Ethernet drivers. Change-ID: Ia88bdb96794e17a3962fcea94db176de01f921f7 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the missing unicast, multicast, and broadcast stats for the port. Change-ID: Ifc366d7b7745f70eaac9d00eeb0694eb9ec076a9 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add VSI HW stats for unicast, multicast, and broadcast for Rx and Tx. Stop printing the netdev multicast value because it doesn't include Tx and would be confusing. Change-ID: I08278b6657e7c838fd29a4a1f305f78fe1b150be Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The wait time was originally too optimistic and the resets were failing after EMPR. This increases the loop count to wait considerably longer. This won't delay the actual wait longer than really needed, just allows us to poll more times as needed. Change-ID: If7b96f55cc25b8d06cbbe8665259d250188c53d7 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Matt Jared 提交于
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: NMatt Jared <matthew.a.jared@intel.com> Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Depending on the timing of what the PF driver is doing, it make take a few tries before the VF driver is able to communicate with the PF driver on init or reset recovery. In order to prevent confusion, make the most common messages less scary by lowering them to a less terrifying log level and indicate that the driver will retry. Change-ID: I1ec22aa59a68f4469aabe14775a1bfc1ab4b7f2f Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver and hardware are not expected to work correctly with revision_id 0 hardware. Don't prevent the user from using it, but be sure to print a warning. Change-ID: I3712d34752bfad458078a5f35dfd0aa0ae9fd20e Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Print the VEB statistics in the ethtool stats output. Change-ID: Ic93d4c3922345c43e4cfd7f7e7a906844dd2f49f Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
When the VEB is created for the basic LAN device and its VSIs, we need to set the tracking lan_veb index for later use. Change-ID: I66bb74993bbda3621ca557437cb4b3517f9b315b Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 6月, 2014 13 次提交
-
-
由 Shannon Nelson 提交于
Add a couple more statistics that the hardware offers but aren't part of the standard netdev stats. Change-ID: I201db2898f2c284aee3d9631470bc5edd349e9a5 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The rx_errors (GLV_REPC) and rx_missed (GLV_RMPC) were removed from the chip design. Change-ID: Ifdeb69c90feac64ec95c36d3d32c75e3a06de3b7 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Pull the PF stat collection out of the VSI collection routine, and add a unifying stats update routine to call the various stat collection routines. Change-ID: I224192455bb3a6e5dc0a426935e67dffc123e306 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This change moves some common code in two places into a small helper function, and corrects a bug in one of the two places in the process. Change-ID: If3bba7152b240f13a7881eb0e8a781655fa66ce7 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
Structure for VEB context added. Update macro for transition from ms to GTIME (us) time units. Change-ID: Ib3a19587b4cf355348655df8f60c6f37bb1497a3 Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Currently, the PF driver only notifies the VFs for PF reset events. Instead, notify the VFs for all types of resets, so they can attempt a graceful reinit. Change-ID: I03eb7afde25727198ef620f8b4e78bb667a11370 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
i40evf_set_ringparam was broken in several ways. First, it only changed the size of the first ring, and second, changing the ring size would often result in a panic because it would change the count before deallocating resources, causing the driver to either free nonexistent buffers, or leak leftover buffers. Fix this by storing the descriptor count in the adapter structure, and updating the count for each ring each time we allocate them. This ensures that we always free the right size ring, and always end up with the requested count when the device is (re)opened. Change-ID: I298396cd3d452ba8509d9f2d33a93f25868a9a55 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Hardware requires descriptors to be allocated in groups of 32. Change-ID: I752ccc96769d1bd8d3018c004b8aeff464045bf2 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was allowing the user to set larger size MTU than the hardware was being configured to support. The driver was already using VLAN_HLEN when setting the hardware max receivable frame size, so just add it to the netdev MTU set entry point as well. Change-ID: Ie20e2a35d04f8c411253e255bea79ca69aaeaea3 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Remove unused defines and macros for RX_LRO. Change-ID: I8ca6715edfa62b56837417a1c4ff68c2345dab6e Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
We introduced this check in case this structure changed in the future, the AQ definition is now mature enough that this check is no longer necessary. Change-ID: Ic66321d0a08557dc9d8cb84029185352cb534330 Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
Register range, being subject to register diagnostic, can vary among different NVMs. We will try to identify the full range and use it for a register test. This is needed to avoid false test results. If we fail to define the proper register range we will test only the first register from that group. Change-ID: Ieee7173c719733b61d3733177a94dc557eb7b3fd Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
A couple of FD checks ended up using bitwise OR to check a value, which ends up always being evaluated to true. This should fix the issue. Thanks to DaveJ for noticing and reporting the issue! CC: Dave Jones <davej@redhat.com> Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 6月, 2014 5 次提交
-
-
由 Manuel Schölling 提交于
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of plain, error-prone math. Signed-off-by: NManuel Schölling <manuel.schoelling@gmx.de> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yongjian Xu 提交于
There is no case skb->len would be 0 or 'negative'. Remove the check. Signed-off-by: NYongjian Xu <xuyongjiande@gmail.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
Set the defaults on probe for the packet buffer size registers for the i210. Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
We can't know what PHY is to be used for i354 backplane, so use MAC loopback for ethtool tests. Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
The name igb_ptp_enable is not synonymous with the purpose of this function, so rename it to better explain its purpose. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-