Fix pcmcia_device_remove NULL pointer dereference at shutdown.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This ugly hack add support for Siemens MC45 PCMCIA GPRS card (which is
identical to Possio GCC, and which is offered by one of our local GPRS
providers).  Card has unfortunate feature that after poweron oxcf950 chip
is fully powered and works, but attached MC45 modem is powered down :-(
There is a special sequence (which takes 1 sec :-( ) to poweron MC45 (and
after MC45 powers on, it takes more than 2 secs until firmware fully
boots...) which needs to be executed after all powerons.

I'm really not familiar with PCMCIA subsystem, so I have no idea whether I
should issue request_region() on rest of oxcf950 address range (0-7 is
UART, 8-F are special configuration registers), or how this should be
better integrated with PM system and so on - I just put it in same place
where another hack already lived...

Card uses 18.432MHz XTAL, so to get it to work you must add lines below to
the /etc/pcmcia/serial.opts.

case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in
'030c,0003-2-GPRS-CARD--')
    SERIAL_OPTS="baud_base 1152000"
    ;;
esac

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

If the driver for the primary pseudo device is removed from the device,
the secondary driver must be removed as well -- it cannot exist on its own.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of the DEV_OK macro, drivers should use pcmcia_dev_present().
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the unused DEV_RELEASE_PENDING flag, and move the DEV_SUSPEND flag
into the p_dev structure, and make use of it at the core level.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

We can now make pcmcia_release_{io,irq} static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Most of the driver initialization isn't done in the .probe function, but in
the internal _config() functions. Make them return a value, so that .probe
can properly report whether the probing of the device succeeded or not.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Rename pcmcia_device.state (which is used in very few places) to p_state
in order to avoid a namespace collision when moving the deprecated
dev_link_t into struct pcmcia_device
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Handle the _modifying_ operation sm91c92_cs requires in
pcmcia_modify_configuration, so that the only remaining users
of pcmcia_release_configuration() are within the pcmcia core
module.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

In all but one case, the suspend and resume functions of PCMCIA drivers
contain mostly of calls to pcmcia_release_configuration() and
pcmcia_request_configuration(). Therefore, move this code out of the
drivers and into the core.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Convert the remaining drivers which use pcmcia_release_io or
pcmcia_release_irq, and remove the EXPORT of these symbols.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary
cleanups upon device or driver removal: it calls the appropriate
pcmcia_release_* functions, and can replace (most) of the current drivers'
_release() functions.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Add Merlin U630 IDs.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This patch adds support for the Compact Flash controller integrated in
the Atmel AT91RM9200 processor.

Signed-off-by: Andrew Victor <andrew@sanpeople.com
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

socket.functions is the number of functions, and so must be one larger
than the maximum function number.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove misleading comment.
Signed-off-by: NKomuro <komurojun-mbn@nifty.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

pcmcia_request_io() doesn't mark the resource as busy in 2.6., therefore
there's no need to work around the registration of the resources into the
resource tree.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

BasePort, NumPorts and Attributes are or can be embedded in
struct resource, so remove them.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

If the kernel is configured to not include the deprecated PCMCIA ioctl,
some code doesn't need to be built.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the compatibility wrappers, as they can (now) also be implemented
using macros. Please continue using these wrappers instead of new functions
until a new API has stabilized.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the inclusion of include/config.h as it isn't needed any longer.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use mutexes in the PCMICA core, as they suffice for what needs to be done.
Includes a bugfix from and Signed-off-by Andrew Morton.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove unused fields and declarations.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Handle config_t structs independent of struct pcmcia_socket, and add
reference counting for them.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Update the remaining users using the static lookup table of the PCMCIA
function configuration to use the struct pcmcia_device-contained pointer.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Access the PCMCIA config_t struct (one per device function) using
a pointer in struct pcmcia_device, instead of looking them up in
an array.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

config_t.Present is set to the same value as CardValues, which isn't modified
anywhere. Therefore, we can use only one of these two objects.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

For some time, the core pcmcia drivers seem not to think single
character prod_ids are valid, thus preventing the "cleverly" named

  "D" "Link DWL-650 11Mbps WLAN Card"

Before (as in 2.6.16):
PRODID_1=""
PRODID_2="Link DWL-650 11Mbps WLAN Card"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6

After (with the patch)
PRODID_1="D"
PRODID_2="Link DWL-650 11Mbps WLAN Card"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6
Signed-off-by: NJanos Farkas <chexum@gmail.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Woe be unto he who builds their filesystems as modules.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
[ Obscure quote from the infamous geek bible? ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (24 commits)
  [PARISC] Fix double free when removing HIL drivers
  [PARISC] Add atomic_sub_and_test
  [PARISC] Enabled some NLS modules in a500, b180 and c3000 defconfigs
  [PARISC] Kill duplicated EXPORT_SYMBOL warnings
  [PARISC] Move ioremap EXPORT_SYMBOL from parisc_ksyms.c
  [PARISC] Make local_t use atomic_long_t
  [PARISC] Update defconfigs
  [PARISC] Add PREEMPT support
  [PARISC] More useful readwrite lock helpers
  [PARISC] Convert HIL drivers to use input_allocate_device
  [PARISC] Fixup CONFIG_EISA a bit
  [PARISC] getsockopt should be ENTRY_COMP
  [PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP
  [PARISC] Temporary FIXME for ioremapping EISA regions
  [PARISC] Enable ioremap functionality unconditionally
  [PARISC] Fix stifb with IOREMAP and a 64-bit kernel
  [PARISC] Add CONFIG_HPPA_IOREMAP to conditionally enable ioremap
  [PARISC] Add STRICT_MM_TYPECHECKS
  [PARISC] Fix IOREMAP with a 64-bit kernel
  [PARISC] Add parisc implementation of flush_kernel_dcache_page()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mad: RMPP support for additional classes
  IB/mad: include GID/class when matching receives
  IB/mthca: Fix section mismatch problems
  IPoIB: Fix oops with raw sockets
  IB/mthca: Fix check of size in SRQ creation
  IB/srp: Fix unmapping of fake scatterlist

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] sata_mv: three bug fixes
  [PATCH] libata: ata_dev_init_params() fixes
  [PATCH] libata: Fix interesting use of "extern" and also some bracketing
  [PATCH] libata: Simplex and other mode filtering logic
  [PATCH] libata - ATA is both ATA and CFA
  [PATCH] libata: Add ->set_mode hook for odd drivers
  [PATCH] libata: BMDMA handling updates
  [PATCH] libata: kill trailing whitespace
  [PATCH] libata: add FIXME above ata_dev_xfermask()
  [PATCH] libata: cosmetic changes in ata_bus_softreset()
  [PATCH] libata: kill E.D.D.

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: remove drm_{alloc,free}_pages
  drm: sis fix compile warning
  drm: add new radeon PCI ids..
  drm: read breadcrumb in IRQ handler
  drm: fixup i915 breadcrumb read/write
  drm:  remove pointless checks in radeon_state
  drm: fixup improper cast.
  drm: rationalise some pci ids
  drm: Add general-purpose packet for manipulating scratch registers (r300)
  drm: rework radeon memory map (radeon 1.23)
  drm: update r300 register names
  drm: fixup PCI DMA support

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] ioremap() should prefer WB over UC
  [IA64] Add __mca_table to the DISCARD list in gate.lds
  [IA64] Move __mca_table out of the __init section
  [IA64] simplify some condition checks in iosapic_check_gsi_range
  [IA64] correct some messages and fixes some minor things
  [IA64-SGI] fix for-loop in sn_hwperf_geoid_to_cnode()
  [IA64-SGI] sn_hwperf use of num_online_cpus()
  [IA64] optimize flush_tlb_range on large numa box
  [IA64] lazy_mmu_prot_update needs to be aware of huge pages

This enables the caller to migrate pages from one address space page
cache to another.  In buzz word marketing, you can do zero-copy file
copies!
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds support for the sys_splice system call. Using a pipe as a
transport, it can connect to files or sockets (latter as output only).

From the splice.c comments:

   "splice": joining two ropes together by interweaving their strands.

   This is the "extended pipe" functionality, where a pipe is used as
   an arbitrary in-memory buffer. Think of a pipe as a small kernel
   buffer that you can use to transfer data from one end to the other.

   The traditional unix read/write is extended with a "splice()" operation
   that transfers data buffers to or from a pipe buffer.

   Named by Larry McVoy, original implementation from Linus, extended by
   Jens to support splicing to files and fixing the initial implementation
   bugs.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>