As EAPD on NID 0x12 (speaker pin) is used as the master amp on
Thinkpads with AD1984A codec, we can hook this to vmaster for saving a
bit more power at master mute state.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD1984A codec has a couple of pins with EAPD controls, and the generic
codec driver tries to turn each of them on/off depending on the pin
active state.  However, Thinkpads seem to use EAPD of the speaker pin
as a master EAPD for controlling the mute of all outputs, including
the headphone.  This results in the dead headphone output via the
headphone plugging because it mutes the speaker and turns off EAPD.

The fix is to simply add spec->gen.keep_on_eapd flag.

[This is a regression fix on 3.12 where we moved the AD codec parser
 to the generic parser.  3.11 and earlier didn't show this problem
 because still static quirks have been used.]
Reported-and-tested-by: NVito Caputo <vcaputo@gnugeneration.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Finally all the static quirks in patch_analog.c are reduced by this
patch.  As machines with AD1986A codec are all old and often their
BIOS are buggy, we need to keep at least a few static pin conifgs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Most of ASUS laptops and Lenovo N100 provide proper BIOS pin-configs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The BIOS provides good pin-configurations, so we can drop the static
quirk now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BIOS on Samsung R55, M55 and M50 provide the proper pin-configs,
so we can remove the corresponding static quirk entries gracefully.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just need to override some pin-configurations.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... to a fixup entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For removing static quirks for AD1988 variants, a new fixup defining
the 6stack pinconfig has been added for the buggy BIOS.  Other than
that, we can cut off straightforwardly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are relatively easy ones, as we already converted all static
quirks to the generic parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the necessary device-specific fixups for Thinkpad and HP devices
have been already ported, we can remove all static quirks for AD1884,
AD1984, AD1884A and AD1984A codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now the generic parser can work stably enough, we can get rid of the
static quirks.  Let's start from AD1882.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Ported from the static quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Ported from the static quirk (model=thinkpad).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The AD1884 HP laptop/mobile quirks control GPIO1 bit as the primary
mute as well.  Add the similar control to ad1884 fixup for auto
parser, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ad1884_fixup_hp_eapd() tries to set the NID for controlling the
speaker EAPD from the pin configuration.  But the current code can't
work expectedly since it sets spec->eapd_nid before calling the
generic parser where the autocfg pins are set up.

This patch changes the function to set spec->eapd_nid after the
generic parser call while it sets vmaster hook unconditionally.  The
spec->eapd_nid check is moved in the hook function itself instead.

Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of calling snd_hda_attach_beep_device() and
snd_hda_detach_beep_device() in each codec driver, move them to the
generic parser.  The codec driver just needs to set spec->beep_nid for
activating the digital beep.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD1988 family and AD1882 codecs have another mixer widget (0x21)
between the analog-loopback mixer widget (0x20) and the actual
outputs.  Due to this hole, the analog-loopbacks aren't sent properly
to the output pins.

As a band-aid fix, introduce another fields holding the aamix merge
path, and activate it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now all AD codecs have the proper BIOS auto-parser, and we can make
it for default, finally.  (AD1988 already did it because it had the
auto-parser.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Other remaining quirks are mostly resolvable via pincfg fixes, even if
it matters.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As done for patch_conexant.c, put ifdef ENABLE_AD_STATIC_QUIRKS for
preparing t odrop the static quirk codes in patch_analog.c.

The whole static quirk code can be omitted by commenting out
ENABLE_AD_STATIC_QUIRKS define now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD codecs have strange implementations for choosing the SPDIF-output
mux source: the digital audio out widget may take the sources from
multiple connections, where 0x01 indicates it's a PCM while others
point ADCs.  It's obviously invalid in the HD-audio spec POV, but it's
somehow convincing, too.  And, to make things more complex, AD1988A
and AD1882 have deeper connection routes that aren't expressed
correctly.

In this patch, the SPDIF mux control is implemented in two ways:
- For easier one like AD1981, AD1983, AD1884 and AD1984, where the
  SPDIF audio out widget takes just two or three sources, we can
  simply implement via the normal input_mux and connection verb
  calls.

- For the complex routes like AD1988A (but not AD1988B) or AD1882, we
  prepare "faked" paths represented statically, and switch the paths
  using these static ones, instead of parsing the routes from the
  widget tree.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The aamix NIDs are also missing for AD codecs.  All AD codecs seem to
have a (more or less) working aamix widget.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This resulted in non-working auto-mute behavior, of course...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the support for the generic auto-parser to AD codec
driver.  For AD1988, the old code is replaced simply with the new
generic parser.  For other codecs, new model "auto" is added and
directed to use the generic parser.

No fixup codes have been implemented yet as of now.  Eventually we'd
replace each static quirk with the generic parser + fixup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's used only in one place in patch_analog.c, and it can be replaced
with others better.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a preliminary patch for introducing a protection to access
races of snd_array instances.  Call snd_array_init() appropriately
at the initialization time and don't call it twice.

Also the allocations of codec-spec structs are cleaned up by helper
functions in patch_sigmatel.c and patch_analog.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The free callback is called at the state where no extra verbs are
executed, thus calling *_shutup() is useless, as it's checking the
shutdown flag.  Remove such superfluous calls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Several bug reports suggest that the forcibly resetting IEC958 status
bits is required for AD codecs to get the SPDIF output working
properly after changing streams.

Original fix credit to Javeed Shaikh.

BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/359361Reported-by: NRobin Kreis <r.kreis@uni-bremen.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The standard name (and what PulseAudio picks up) is "Dock Mic",
not "Docking Mic" or "Docking-Station".
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CONFIG_SND_HDA_POWER_SAVE is no longer an experimental feature and its
behavior can be well controlled via the default value and module
parameter.  Let's just replace it with the standard CONFIG_PM.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a simple support of automute for the front HP jack to AD1882
stack model.  Such an addition is basically an exception -- we really
want to avoid the static quirk codes, but AD1882 parser isn't still
ready for moving to the BIOS auto-parser yet.  So, as a quick fix, I
merged it for now.

In near future, we really need the big clean up of patch_analog.c to
move on to the auto-parser...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just code shuffles.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new helper function to guess the default VREF pin control bits
for mic in.  This can be used to set the pin control value safely
matching with the actual pin capabilities.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For setting the pin-control values more safely to match with the
actual pin capability bits, a copule of new helper functions,
snd_hda_set_pin_ctl() and snd_hda_set_pin_ctl_cache(), are
introduced.  These are simple replacement of the codec verb write with
AC_VERB_SET_PIN_WIDGET but do more sanity checks and filter out
superfluous pin-control bits if they don't fit with the corresponding
pin capabilities.

Some codecs are screwed up or ignore the command when such a wrong bit
is set.  These helpers will avoid such secret errors.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It'll be used for adding hooks in later patches.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the driver is changed to use vmaster or a new slave element is
added by the improvement of the parser code, user may face often the
silent output because of the muted slave mixer although Master volume
is properly set.  And they complain.  And I get upset.

Although such a mixer element should be initialized via "alsactl init",
it'd be more user-friendly if the known output slaves are unmuted and
set to 0dB so that user can control the volume only with Master as
default.  Since Master is still set muted as default even with this
change, no risk of the speaker blow up, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In most cases, the slave strings for vmaster are identical between
volumes and switches except for "xxx Volume" and "xxx Switch" suffix.
Now snd_hda_add_vmaster() takes the optional suffix argument so that
each string can be composed with the given suffix, and we can share the
slave name strings in both volume and switch calls nicely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>