Get gpu info through adev directly in powerplay
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

use adev as input parameter to create powerplay instance
directly. delete cgs wrap layer for power play create.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

powerplay need vram width to set default mclk optimization
settings(uphyst/downhyst/activity threshold)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will be used by powerplay to update the dpm temp range structure
used to interface with hwmon.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Nobody is actually using this and it causes a bunch of unused and buggy code.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

  - v2: rename param 'en' as 'lock'
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Those functions are all unused and some not even implemented.

v2: keep cgs_get_pci_resource, it is used by the ACP driver.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

.c and .h source files should not be executable, change
the permissions to 0644.

[ This would normally go through Andrew Morton, but his ancient
  patch-based toolchain doesn't do permission changes ]
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

for sriov, SMC need MEC_STORAGE reserved in fw bo.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NFrank Min <frank.min@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFrank Min <Frank.Min@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFrank Min <Frank.Min@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sub_vendor_id in cgs interface.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds device id and revision into system info entry at CGS,
it's able to get PCI device id and revision id from amdgpu, it might
get more info in future.

PCI device id will be also used on powerplay part at current.
Suggested-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The ucode_start_address would be used on powerplay of iceland.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Create a GC_CAC_IND_INDEX/DATA pair of funcitons to program
all the CAC registers
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the num of shade engine was needed to
measure the activity of the graphics core
and to enable di/dt feature.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It was redundant with data_length, and in fact set incorrectly in one case
leading to an out-of-bound read by memcpy in acpi_ut_copy_esimple_to_isimple,
reported by CONFIG_KASAN=y.
Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Powerplay uses cgs to load the firmware so add a function
to release it as well to avoid leaking it on driver unload.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed for per CU powergating.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add CGS_UCODE_ID_SMU_SK.
Signed-off-by: Nyanyang1 <Young.Yang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is just a type-safety things to avoid everyone taking void *,
it doesn't change anything.

v2: agd5f: split out the dal changes into a separate patch.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed to pass the cg and pg info to powerplay.
Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This provides an interface to get access to the base address
of PCI resources (MMIO, DOORBELL, etc.).  Only MMIO and
DOORBELL are implemented right now.  This is necessary to
properly utilize shared drivers on platform devices.  IP
modules can use this interface to get the base address
of the resource and add any additional offset and set the
size when setting up the platform driver(s).
Acked-by: NDave Airlie <airlied@redhat.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed by powerplay to properly handle pcie dpm switching.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new CGS interfaces to query display info across modules.
This is nedded by the powerplay module for synchronizing with
the display module.

v2: (agd): fold in refresh rate fix, rebase
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Add a query to get the bus number and function of the
device.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Add a new driver internal interface for accessing ACPI
methods.  These will be used by various new components
including powerplay.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

v3: check whether ip_blocks is enable
v2: add break in the for loop.
Signed-off-by: NRex zhu <rezhu@amd.com>

Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This new interface can be used by IP components to retrieve the
firmware information from the core driver.

v2: fix one typo
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhou@amd.com>
Signed-off-by: NYoung Yang <Young.Yang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

CGS (Common Graphics Services) is an AMD cross component
abstraction layer to designed to better encapsulate
specific IP block drivers so different teams can effectively
work on differnet IP block drivers independently. It provides
a common interface for things like accessing registers,
allocating GPU memory, and registering interrupt sources.
The plan is to eventually move more and more IP drivers to
this interface.  The first user is the ACP IP driver.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>