OSD was the last in-tree user of blk_rq_append_bio(). Now
that it is fixed blk_rq_append_bio is un-exported and
is only used internally by block layer.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

New block API:
given a struct bio allocates a new request. This is the parallel of
generic_make_request for BLOCK_PC commands users.

The passed bio may be a chained-bio. The bio is bounced if needed
inside the call to this member.

This is in the effort of un-exporting blk_rq_append_bio().
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Let's put the completion related functions back to block/blk-core.c
where they have lived. We can also unexport blk_end_bidi_request() and
__blk_end_bidi_request(), which nobody uses.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_end_request_all() and __blk_end_request_all() should finish all
bytes including bidi, by definition. That's what all bidi users need ,
bidi requests must be complete as a whole (partial completion is
impossible).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Block low level drivers for some reason have been pretty good at
abusing block layer API.  Especially struct request's fields tend to
get violated in all possible ways.  Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.

This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.

[ Impact: hide internal fields, block API change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Ackec-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion.  This duality creates some
headaches.

First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing.  It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count.  This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.

Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred.  The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all.  This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.

This patch adds rq->resid_len which is used only for residual count.

While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.

Boaz	: spotted missing conversion in osd
Sergei	: spotted too early conversion to blk_rq_bytes() in ide-tape

[ Impact: cleanup residual count handling, report 0 resid by default ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

In the process of mindlessly copying [__]blk_end_request_all(),
[__]blk_end_request_cur() ended up returning void even though they're
partial completion functions.  Fix it.

[ Impact: fix braindead API ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Now that all block request data transfer is done via bio, rq->data
isn't used.  Kill it.

While at it, make the roles of rq->special and buffer clear.

[ Impact: drop now unncessary field from struct request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>

end_request() has been kept around for backward compatibility;
however, it's about time for it to go away.

* There aren't too many users left.

* Its use of @updtodate is pretty confusing.

* In some cases, newer code ends up using mixture of end_request() and
  [__]blk_end_request[_all](), which is way too confusing.

So, add [__]blk_end_request_cur() and replace end_request() with it.
Most conversions are straightforward.  Noteworthy ones are...

* paride/pcd: next_request() updated to take 0/-errno instead of 1/0.

* paride/pf: pf_end_request() and next_request() updated to take
  0/-errno instead of 1/0.

* xd: xd_readwrite() updated to return 0/-errno instead of 1/0.

* mtd/mtd_blkdevs: blktrans_discard_request() updated to return
  0/-errno instead of 1/0.  Unnecessary local variable res
  initialization removed from mtd_blktrans_thread().

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJoerg Dorchain <joerg@dorchain.net>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NLaurent Vivier <Laurent@lvivier.info>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: unsik Kim <donari75@gmail.com>

There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion.  Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.

This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request.  BUG_ON() is added to to ensure that
this actually happens.

Most conversions are simple but there are a few noteworthy ones.

* cdrom/viocd: viocd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/block/dasd: dasd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/char/tape_block: tapeblock_end_request() replaced with direct
  calls to blk_end_request_all().

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>

Request completion has gone through several changes and became a bit
messy over the time.  Clean it up.

1. end_that_request_data() is a thin wrapper around
   end_that_request_data_first() which checks whether bio is NULL
   before doing anything and handles bidi completion.
   blk_update_request() is a thin wrapper around
   end_that_request_data() which clears nr_sectors on the last
   iteration but doesn't use the bidi completion.

   Clean it up by moving the initial bio NULL check and nr_sectors
   clearing on the last iteration into end_that_request_data() and
   renaming it to blk_update_request(), which makes blk_end_io() the
   only user of end_that_request_data().  Collapse
   end_that_request_data() into blk_end_io().

2. There are four visible completion variants - blk_end_request(),
   __blk_end_request(), blk_end_bidi_request() and end_request().
   blk_end_request() and blk_end_bidi_request() uses blk_end_request()
   as the backend but __blk_end_request() and end_request() use
   separate implementation in __blk_end_request() due to different
   locking rules.

   blk_end_bidi_request() is identical to blk_end_io().  Collapse
   blk_end_io() into blk_end_bidi_request(), separate out request
   update into internal helper blk_update_bidi_request() and add
   __blk_end_bidi_request().  Redefine [__]blk_end_request() as thin
   inline wrappers around [__]blk_end_bidi_request().

3. As the whole request issue/completion usages are about to be
   modified and audited, it's a good chance to convert completion
   functions return bool which better indicates the intended meaning
   of return values.

4. The function name end_that_request_last() is from the days when it
   was a public interface and slighly confusing.  Give it a proper
   internal name - blk_finish_request().

5. Add description explaning that blk_end_bidi_request() can be safely
   used for uni requests as suggested by Boaz Harrosh.

The only visible behavior change is from #1.  nr_sectors counts are
cleared after the final iteration no matter which function is used to
complete the request.  I couldn't find any place where the code
assumes those nr_sectors counters contain the values for the last
segment and this change is good as it makes the API much more
consistent as the end result is now same whether a request is
completed using [__]blk_end_request() alone or in combination with
blk_update_request().

API further cleaned up per Christoph's suggestion.

[ Impact: cleanup, rq->*nr_sectors always updated after req completion ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>

With recent IDE updates, blk_end_request_callback() doesn't have any
user now.  Kill it.

[ Impact: removal of unused convoluted interface ]
Signed-off-by: NTejun Heo <tj@kernel.org>

Reorder request completion functions such that

* All request completion functions are located together.

* Functions which are used by only one caller is put right above the
  caller.

* end_request() is put after other completion functions but before
  blk_update_request().

This change is for completion function cleanup which will follow.

[ Impact: cleanup, code reorganization ]
Signed-off-by: NTejun Heo <tj@kernel.org>

blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion.  None of the current users depends on
blk_start_queueing() running request_fn directly.  Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.

[ Impact: removal of mostly duplicate interface function ]
Signed-off-by: NTejun Heo <tj@kernel.org>

This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.

Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The request inherits the unplug flag from the bio, but it isn't actually
used. The bio flag stops at __make_request(), which tells it to unplug
after submission. Passing it on to the request doesn't make any sense.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.

Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes sure that we never wait on async IO for sync requests, instead
of doing the split on writes vs reads.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

blk_recalc_rq_segments() requires a request structure passed in, which
we don't have from blk_recount_segments(). So the latter allocates one on
the stack, using > 400 bytes of stack for that. This can cause us to spill
over one page of stack from ext4 at least:

 0)     4560     400   blk_recount_segments+0x43/0x62
 1)     4160      32   bio_phys_segments+0x1c/0x24
 2)     4128      32   blk_rq_bio_prep+0x2a/0xf9
 3)     4096      32   init_request_from_bio+0xf9/0xfe
 4)     4064     112   __make_request+0x33c/0x3f6
 5)     3952     144   generic_make_request+0x2d1/0x321
 6)     3808      64   submit_bio+0xb9/0xc3
 7)     3744      48   submit_bh+0xea/0x10e
 8)     3696     368   ext4_mb_init_cache+0x257/0xa6a [ext4]
 9)     3328     288   ext4_mb_regular_allocator+0x421/0xcd9 [ext4]
10)     3040     160   ext4_mb_new_blocks+0x211/0x4b4 [ext4]
11)     2880     336   ext4_ext_get_blocks+0xb61/0xd45 [ext4]
12)     2544      96   ext4_get_blocks_wrap+0xf2/0x200 [ext4]
13)     2448      80   ext4_da_get_block_write+0x6e/0x16b [ext4]
14)     2368     352   mpage_da_map_blocks+0x7e/0x4b3 [ext4]
15)     2016     352   ext4_da_writepages+0x2ce/0x43c [ext4]
16)     1664      32   do_writepages+0x2d/0x3c
17)     1632     144   __writeback_single_inode+0x162/0x2cd
18)     1488      96   generic_sync_sb_inodes+0x1e3/0x32b
19)     1392      16   sync_sb_inodes+0xe/0x10
20)     1376      48   writeback_inodes+0x69/0xb3
21)     1328     208   balance_dirty_pages_ratelimited_nr+0x187/0x2f9
22)     1120     224   generic_file_buffered_write+0x1d4/0x2c4
23)      896     176   __generic_file_aio_write_nolock+0x35f/0x393
24)      720      80   generic_file_aio_write+0x6c/0xc8
25)      640      80   ext4_file_write+0xa9/0x137 [ext4]
26)      560     320   do_sync_write+0xf0/0x137
27)      240      48   vfs_write+0xb3/0x13c
28)      192      64   sys_write+0x4c/0x74
29)      128     128   system_call_fastpath+0x16/0x1b

Split the segment counting out into a __blk_recalc_rq_segments() helper
to avoid allocating an onstack request just for checking the physical
segment count.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This allows us to turn off disk stat accounting completely, for the cases
where the 0.5-1% reduction in system time is important.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The commit 81882766 (block: make
blk_rq_map_user take a NULL user-space buffer) extended
blk_rq_map_user to accept a NULL user-space buffer with a READ
command. It was necessary to convert sg to use the block layer mapping
API.

This patch extends blk_rq_map_user again for a WRITE command. It is
necessary to convert st and osst drivers to use the block layer
apping API.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This fixes bio_copy_user_iov to properly handle the partial mappings
with struct rq_map_data (which only sg uses for now but st and osst
will shortly). It adds the offset member to struct rq_map_data and
changes blk_rq_map_user to update it so that bio_copy_user_iov can add
an appropriate page frame via bio_add_pc_page().
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Just use struct elevator_queue everywhere instead.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Empty barrier required special handling in __elv_next_request() to
complete it without letting the low level driver see it.

With previous changes, barrier code is now flexible enough to skip the
BAR step using the same barrier sequence selection mechanism.  Drop
the special handling and mask off q->ordered from start_ordered().

Remove blk_empty_barrier() test which now has no user.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Barrier completion had the following assumptions.

* start_ordered() couldn't finish the whole sequence properly.  If all
  actions are to be skipped, q->ordseq is set correctly but the actual
  completion was never triggered thus hanging the barrier request.

* Drain completion in elv_complete_request() assumed that there's
  always at least one request in the queue when drain completes.

Both assumptions are true but these assumptions need to be removed to
improve empty barrier implementation.  This patch makes the following
changes.

* Make start_ordered() use blk_ordered_complete_seq() to mark skipped
  steps complete and notify __elv_next_request() that it should fetch
  the next request if the whole barrier has completed inside
  start_ordered().

* Make drain completion path in elv_complete_request() check whether
  the queue is empty.  Empty queue also indicates drain completion.

* While at it, convert 0/1 return from blk_do_ordered() to false/true.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

In all barrier sequences, the barrier write itself was always assumed
to be issued and thus didn't have corresponding control flag.  This
patch adds QUEUE_ORDERED_DO_BAR and unify action mask handling in
start_ordered() such that any barrier action can be skipped.

This patch doesn't introduce any visible behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Separate out ordering type (drain,) and action masks (preflush,
postflush, fua) from visible ordering mode selectors
(QUEUE_ORDERED_*).  Ordering types are now named QUEUE_ORDERED_BY_*
while action masks are named QUEUE_ORDERED_DO_*.

This change is necessary to add QUEUE_ORDERED_DO_BAR and make it
optional to improve empty barrier implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.

The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

As is the case with SSD devices, we do not want to idle in AS/CFQ when
the block device is a paravirt front-end driver. This patch adds a flag
(QUEUE_FLAG_VIRT) which should be used by front-end drivers such as
virtio_blk and xen-blkfront to indicate a paravirtualized device.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

There's no point in having too short SG_IO timeouts, since if the
command does end up timing out, we'll end up through the reset sequence
that is several seconds long in order to abort the command that timed
out.

As a result, shorter timeouts than a few seconds simply do not make
sense, as the recovery would be longer than the timeout itself.

Add a BLK_MIN_SG_TIMEOUT to match the existign BLK_DEFAULT_SG_TIMEOUT.
Suggested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.

When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.

If you create MD device over SCSI, these attributes are zeroed.

Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:

request_queue   max_segment_size  seg_boundary_mask
SCSI                65536             0xffffffff
MD RAID1                0                      0
LVM                 65536                 -1 (64bit)

Unfortunately bio_add_page (resp.  bio_phys_segments) calculates number of
physical segments according to these parameters.

During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit.  (After
bio_clone() in stack operation.)

Thi is specially problem in CCISS driver, where it produce OOPS here

    BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);

(MAXSEGENTRIES is 31 by default.)

Sometimes even this command is enough to cause oops:

  dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10

This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).

For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().

The patch tries to fix it by:

 * initializing attributes above in queue request constructor
   blk_queue_make_request()

 * make sure that blk_queue_stack_limits() inherits setting

 (DM uses its own function to set the limits because it
 blk_queue_stack_limits() was introduced later.  It should probably switch
 to use generic stack limit function too.)

 * sets the default seg_boundary value in one place (blkdev.h)

 * use this mask as default in DM (instead of -1, which differs in 64bit)

Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639
http://bugzilla.kernel.org/show_bug.cgi?id=8672Signed-off-by: NMilan Broz <mbroz@redhat.com>
Reviewed-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blkdev_dequeue_request() and elv_dequeue_request() are equivalent and
both start the timeout timer.  Barrier code dequeues the original
barrier request but doesn't passes the request itself to lower level
driver, only broken down proxy requests; however, as the original
barrier code goes through the same dequeue path and timeout timer is
started on it.  If barrier sequence takes long enough, this timer
expires but the low level driver has no idea about this request and
oops follows.

Timeout timer shouldn't have been started on the original barrier
request as it never goes through actual IO.  This patch unexports
elv_dequeue_request(), which has no external user anyway, and makes it
operate on elevator proper w/o adding the timer and make
blkdev_dequeue_request() call elv_dequeue_request() and add timer.
Internal users which don't pass the request to driver - barrier code
and end_that_request_last() - are converted to use
elv_dequeue_request().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Analog of blkdev_driver_ioctl() with sane arguments.  For
now uses fake struct file, by the end of the series it won't
and blkdev_driver_ioctl() will become a wrapper around it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>