Convert to test_bit() as that is what pretty much everyone uses and allows
us to migrate asm/bitops.h to the asm-generic version.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

When a low priority interrupt (like ethernet) is triggered between 2 high
priority IPI messages, a deadlock in disable_irq() is hit by the second
IPI handler.  This is because the second IPI message is queued within the
first IPI handler, but the handler doesn't process all messages, and new
ones are inserted rather than appended.  So now we process all the pending
messages, and append new ones to the pending list.

URL: http://blackfin.uclinux.org/gf/tracker/5226Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The KGDB code uses this when switching processors to make sure the icache
is in a valid state.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We don't need to handle CPLB protection violations unless we are running
with the MPU on.  Fix the entry code to call common trap_c, and remove the
code which is never run.  This allows the traps test suite to run on older
boards with the MPU disabled.

URL: http://blackfin.uclinux.org/gf/tracker/5129Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than having to maintain a hard coded list of Blackfin variants, use
the SIC defines themselves.  This fixes build problems on BF51x/BF538 under
some configurations as they were missing from one of the lists.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Commit 6b3087c6 (which introduced Blackfin SMP) broke command line passing
when the DEBUG_DOUBLEFAULT config option was enabled.  Switch the code to
using a scratch register and not R7 which holds the command line.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The Per-processor Data Area isn't actually reserved by this function, and
all it ended up doing was issuing a printk(), so punt it.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Hardware errors on the Blackfin architecture are queued by nature of the
hardware design.  Things that could generate a hardware level queue up at
the system interface and might not process until much later, at which
point the system would send a notification back to the core.

As such, it is possible for user space code to do something that would
trigger a hardware error, but have it delay long enough for the process
context to switch.  So when the hardware error does signal, we mistakenly
evaluate it as a different process or as kernel context and panic (erp!).
This makes it pretty difficult to find the offending context.  But wait,
there is good news somewhere.

By forcing a SSYNC in the interrupt entry, we force all pending queues at
the system level to be processed and all hardware errors to be signaled.
Then we check the current interrupt state to see if the hardware error is
now signaled.  If so, we re-queue the current interrupt and return thus
allowing the higher priority hardware error interrupt to process properly.
Since we haven't done any other context processing yet, the right context
will be selected and killed.  There is still the possibility that the
exact offending instruction will be unknown, but at least we'll have a
much better idea of where to look.

The downside of course is that this causes system-wide syncs at every
interrupt point which results in significant performance degradation.
Since this situation should not occur in any properly configured system
(as hardware errors are triggered by things like bad pointers), make it a
debug configuration option and disable it by default.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Document anomaly 05000242 workaround in source code.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

When possible, work around anomaly 05000220 (external memory is write
back cached, but L2 is not cached).  If not possible, detect the
conditions at build time and reject any qualifying configurations.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

For systems where the core cycles are not a usable tick source (like SMP
or cycles gets updated), enable gptimer0 as an alternative.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Add some notes for anomaly 05000120 to make sure we work around it.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Detect and reject operating conditions for anomaly 05000274 since the
problem cannot be worked around in software.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Workaround anomaly 05000227 by only using the scratch pad for stack when
absolutely necessary.  The core code which reprograms clocks really only
touches MMRs directly with constants.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Simplify the do_flush macro now that we don't need to take into account
a second instruction being used together.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

ipipe-2.6.28.9-blackfin-git95aafe6.patch
Singed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Make sure we flush all data caches and their write buffers before flushing
icache, otherwise random edge cases could crop up where stale data is read
into icache from external memory.  As fallout, punt the combined icache +
dcache flush function since we cannot safely do them back to back -- the
SSYNC is needed between the dcache flush and the icache flush.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Move exception stack mess from entry.S to init.c to fix link failure when
CONFIG_EXCEPTION_L1_SCRATCH is in use.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Random read/write errors are a bad thing - so don't let anyone
(including the test bench) run on something we know is bad.
Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit

Run IFLUSH twice to avoid loading wrong instruction
after invalidating icache and following sequence is met.

1) The one instruction address is cached in the icache.
2) This instruction in SDRAM is changed.
3) IFLASH[P0] is executed only once in lackfin_icache_flush_range().
4) This instruction is executed again, but not the changed new one.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

IMHO the setting should depend on ANOMALY_05000305 which is about the
availability of the bit, not ANOMALY_05000265 which only describes the
SPORT sensitivity to noise (checked for BF561 only, though).

If that's not true for other BF variants, maybe the definition of
ANOMALY_05000265 for BF561 should be changed to '(1)' instead.
Signed-off-by: NEnrik Berkhan <Enrik.Berkhan@ge.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch

Free spinlock before call IPI handlers.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>


Header from folded patch 'blackfin_arch__fix_bug_-_kgdb_fails_to_continue_after_setting_breakpoint_on_bf561-ezkit_kernel_with_smp_patch-1':

Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch

Don't test l1 code in SMP kernel.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

 - unable to single step over emuexcpt instruction
 - gdbproxy goes into infinite loop when doing gdb does "next" over
   "emuexcpt"

Don't decrement PC after software breakpoint.
Signed-off-by: NJie Zhang <jie.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

bss_l2 section is garbage when the data in this section is used by
_bfin_relocate_l1_mem, so move the zero out function ahead.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

base SIC_IWR# programming on whether the MMR exists
rather than having to maintain another list of processors
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data
path width, typically set 0 for a 32-bit bus width. On other
Blackfin derivatives this bit should be set by default.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

[Mike Frysinger <vapier.adi@gmail.com>:
 - handle bf531/bf532/bf534/bf536 variants in ipipe.h
 - cleanup IPIPE logic for bfin_set_irq_handler()
 - cleanup ipipe asm code a bit and add missing ENDPROC()
 - simplify IPIPE code in trap_c
 - unify some of the IPIPE code and fix style
 - simplify DO_IRQ_L1 handling with ipipe code
 - revert IRQ_SW_INT# addition from ipipe merge
 - remove duplicate get_{c,s}clk() prototypes
]
Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code.

We ditch the old cplb-nompu implementation, which is a good example of
why a good algorithm in a HLL is preferrable to a bad algorithm written in
assembly.  Rather than try to construct a table of all posible CPLBs and
search it, we just create a (smaller) table of memory regions and
their attributes.  Some of the data structures are now unified for both
the mpu and nompu cases.  A lot of needless complexity in cplbinit.c is
removed.

Further optimizations:
  * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving
    these registers on the stack when entering a CPLB exception.
  * lose cli/nop/nop/sti sequences for some workarounds - these don't
  * make
    sense in an exception context

Additional code unification should be possible after this.

[Mike Frysinger <vapier.adi@gmail.com>:
 - convert CPP if statements to C if statements
 - remove redundant statements
 - use a do...while loop rather than a for loop to get slightly better
   optimization and to avoid gcc "may be used uninitialized" warnings ...
   we know that the [id]cplb_nr_bounds variables will never be 0, so this
   is OK
 - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten,
   we can punt it
 - add some BUG_ON() checks to make sure we dont overflow the small
   cplb_bounds array
 - add i/d cplb entries for the bootrom because there is functions/data in
   there we want to access
 - we do not need a NULL trailing entry as any time we access the bounds
   arrays, we use the nr_bounds variable
]
Signed-off-by: NMichael McTernan <mmcternan@airvana.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

It should be 'lose', not 'loose'.
Signed-off-by: NNick Andrew <nick@nick-andrew.net>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>