Define a selinux state structure (struct selinux_state) for
global SELinux state and pass it explicitly to all security server
functions.  The public portion of the structure contains state
that is used throughout the SELinux code, such as the enforcing mode.
The structure also contains a pointer to a selinux_ss structure whose
definition is private to the security server and contains security
server specific state such as the policy database and SID table.

This change should have no effect on SELinux behavior or APIs
(userspace or LSM).  It merely wraps SELinux state and passes it
explicitly as needed.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
[PM: minor fixups needed due to collisions with the SCTP patches]
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Update my email address since epoch.ncsc.mil no longer exists.
MAINTAINERS and CREDITS are already correct.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

As systemd ramps up enabling NNP (NoNewPrivileges) for system services,
it is increasingly breaking SELinux domain transitions for those services
and their descendants.  systemd enables NNP not only for services whose
unit files explicitly specify NoNewPrivileges=yes but also for services
whose unit files specify any of the following options in combination with
running without CAP_SYS_ADMIN (e.g. specifying User= or a
CapabilityBoundingSet= without CAP_SYS_ADMIN): SystemCallFilter=,
SystemCallArchitectures=, RestrictAddressFamilies=, RestrictNamespaces=,
PrivateDevices=, ProtectKernelTunables=, ProtectKernelModules=,
MemoryDenyWriteExecute=, or RestrictRealtime= as per the systemd.exec(5)
man page.

The end result is bad for the security of both SELinux-disabled and
SELinux-enabled systems.  Packagers have to turn off these
options in the unit files to preserve SELinux domain transitions.  For
users who choose to disable SELinux, this means that they miss out on
at least having the systemd-supported protections.  For users who keep
SELinux enabled, they may still be missing out on some protections
because it isn't necessarily guaranteed that the SELinux policy for
that service provides the same protections in all cases.

commit 7b0d0b40 ("selinux: Permit bounded transitions under
NO_NEW_PRIVS or NOSUID.") allowed bounded transitions under NNP in
order to support limited usage for sandboxing programs.  However,
defining typebounds for all of the affected service domains
is impractical to implement in policy, since typebounds requires us
to ensure that each domain is allowed everything all of its descendant
domains are allowed, and this has to be repeated for the entire chain
of domain transitions.  There is no way to clone all allow rules from
descendants to their ancestors in policy currently, and doing so would
be undesirable even if it were practical, as it requires leaking
permissions to objects and operations into ancestor domains that could
weaken their own security in order to allow them to the descendants
(e.g. if a descendant requires execmem permission, then so do all of
its ancestors; if a descendant requires execute permission to a file,
then so do all of its ancestors; if a descendant requires read to a
symbolic link or temporary file, then so do all of its ancestors...).
SELinux domains are intentionally not hierarchical / bounded in this
manner normally, and making them so would undermine their protections
and least privilege.

We have long had a similar tension with SELinux transitions and nosuid
mounts, albeit not as severe.  Users often have had to choose between
retaining nosuid on a mount and allowing SELinux domain transitions on
files within those mounts.  This likewise leads to unfortunate tradeoffs
in security.

Decouple NNP/nosuid from SELinux transitions, so that we don't have to
make a choice between them. Introduce a nnp_nosuid_transition policy
capability that enables transitions under NNP/nosuid to be based on
a permission (nnp_transition for NNP; nosuid_transition for nosuid)
between the old and new contexts in addition to the current support
for bounded transitions.  Domain transitions can then be allowed in
policy without requiring the parent to be a strict superset of all of
its children.

With this change, systemd unit files can be left unmodified from upstream.
SELinux-disabled and SELinux-enabled users will benefit from retaining any
of the systemd-provided protections.  SELinux policy will only need to
be adapted to enable the new policy capability and to allow the
new permissions between domain pairs as appropriate.

NB: Allowing nnp_transition between two contexts opens up the potential
for the old context to subvert the new context by installing seccomp
filters before the execve.  Allowing nosuid_transition between two contexts
opens up the potential for a context transition to occur on a file from
an untrusted filesystem (e.g. removable media or remote filesystem).  Use
with care.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Add a type for Infiniband ports and an access vector for subnet
management packets. Implement the ib_port_smp hook to check that the
caller has permission to send and receive SMPs on the end port specified
by the device name and port. Add interface to query the SID for a IB
port, which walks the IB_PORT ocontexts to find an entry for the
given name and port.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NJames Morris <james.l.morris@oracle.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Add a type and access vector for PKeys. Implement the ib_pkey_access
hook to check that the caller has permission to access the PKey on the
given subnet prefix. Add an interface to get the PKey SID. Walk the PKey
ocontexts to find an entry for the given subnet prefix and pkey.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NJames Morris <james.l.morris@oracle.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Support for Infiniband requires the addition of two new object contexts,
one for infiniband PKeys and another IB Ports. Added handlers to read
and write the new ocontext types when reading or writing a binary policy
representation.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Reviewed-by: NJames Morris <james.l.morris@oracle.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Log the state of SELinux policy capabilities when a policy is loaded.
For each policy capability known to the kernel, log the policy capability
name and the value set in the policy.  For policy capabilities that are
set in the loaded policy but unknown to the kernel, log the policy
capability index, since this is the only information presently available
in the policy.

Sample output with a policy created with a new capability defined
that is not known to the kernel:
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=0
SELinux:  unknown policy capability 5

Resolves: https://github.com/SELinuxProject/selinux-kernel/issues/32Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

commit 1ea0ce40 ("selinux: allow
changing labels for cgroupfs") broke the Android init program,
which looks up security contexts whenever creating directories
and attempts to assign them via setfscreatecon().
When creating subdirectories in cgroup mounts, this would previously
be ignored since cgroup did not support userspace setting of security
contexts.  However, after the commit, SELinux would attempt to honor
the requested context on cgroup directories and fail due to permission
denial.  Avoid breaking existing userspace/policy by wrapping this change
with a conditional on a new cgroup_seclabel policy capability.  This
preserves existing behavior until/unless a new policy explicitly enables
this capability.
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Extend SELinux to support distinctions among all network address families
implemented by the kernel by defining new socket security classes
and mapping to them. Otherwise, many sockets are mapped to the generic
socket class and are indistinguishable in policy.  This has come up
previously with regard to selectively allowing access to bluetooth sockets,
and more recently with regard to selectively allowing access to AF_ALG
sockets.  Guido Trentalancia submitted a patch that took a similar approach
to add only support for distinguishing AF_ALG sockets, but this generalizes
his approach to handle all address families implemented by the kernel.
Socket security classes are also added for ICMP and SCTP sockets.
Socket security classes were not defined for AF_* values that are reserved
but unimplemented in the kernel, e.g. AF_NETBEUI, AF_SECURITY, AF_ASH,
AF_ECONET, AF_SNA, AF_WANPIPE.

Backward compatibility is provided by only enabling the finer-grained
socket classes if a new policy capability is set in the policy; older
policies will behave as before.  The legacy redhat1 policy capability
that was only ever used in testing within Fedora for ptrace_child
is reclaimed for this purpose; as far as I can tell, this policy
capability is not enabled in any supported distro policy.

Add a pair of conditional compilation guards to detect when new AF_* values
are added so that we can update SELinux accordingly rather than having to
belatedly update it long after new address families are introduced.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Remove the SECURITY_SELINUX_POLICYDB_VERSION_MAX Kconfig option

Per: https://github.com/SELinuxProject/selinux/wiki/Kernel-Todo

This was only needed on Fedora 3 and 4 and just causes issues now,
so drop it.

The MAX and MIN should just be whatever the kernel can support.
Signed-off-by: NWilliam Roberts <william.c.roberts@intel.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Make validatetrans decisions available through selinuxfs.
"/validatetrans" is added to selinuxfs for this purpose.
This functionality is needed by file system servers
implemented in userspace or kernelspace without the VFS
layer.

Writing "$oldcontext $newcontext $tclass $taskcontext"
to /validatetrans is expected to return 0 if the transition
is allowed and -EPERM otherwise.
Signed-off-by: NAndrew Perepechko <anserper@ya.ru>
CC: andrew.perepechko@seagate.com
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

There seems to be a little confusion as to whether the scontext_len
parameter of security_context_to_sid() includes the nul-byte or
not. Reading security_context_to_sid_core(), it seems that the
expectation is that it does not (both the string copying and the test
for scontext_len being zero hint at that).

Introduce the helper security_context_str_to_sid() to do the strlen()
call and fix all callers.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Add extended permissions logic to selinux. Extended permissions
provides additional permissions in 256 bit increments. Extend the
generic ioctl permission check to use the extended permissions for
per-command filtering. Source/target/class sets including the ioctl
permission may additionally include a set of commands. Example:

allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds
auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds

Where unpriv_app_socket_cmds and priv_gpu_cmds are macros
representing commonly granted sets of ioctl commands.

When ioctl commands are omitted only the permissions are checked.
This feature is intended to provide finer granularity for the ioctl
permission that may be too imprecise. For example, the same driver
may use ioctls to provide important and benign functionality such as
driver version or socket type as well as dangerous capabilities such
as debugging features, read/write/execute to physical memory or
access to sensitive data. Per-command filtering provides a mechanism
to reduce the attack surface of the kernel, and limit applications
to the subset of commands required.

The format of the policy binary has been modified to include ioctl
commands, and the policy version number has been incremented to
POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format
change.

The extended permissions logic is deliberately generic to allow
components to be reused e.g. netlink filters
Signed-off-by: NJeff Vander Stoep <jeffv@google.com>
Acked-by: NNick Kralevich <nnk@google.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Add support for per-file labeling of debugfs files so that
we can distinguish them in policy.  This is particularly
important in Android where certain debugfs files have to be writable
by apps and therefore the debugfs directory tree can be read and
searched by all.

Since debugfs is entirely kernel-generated, the directory tree is
immutable by userspace, and the inodes are pinned in memory, we can
simply use the same approach as with proc and label the inodes from
policy based on pathname from the root of the debugfs filesystem.
Generalize the existing labeling support used for proc and reuse it
for debugfs too.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

To increase compiler portability there is <linux/compiler.h> which
provides convenience macros for various gcc constructs.  Eg: __packed
for __attribute__((packed)).

This patch is part of a large task I've taken to clean the gcc
specific attributes and use the the macros instead.
Signed-off-by: NGideon Israel Dsouza <gidisrael@gmail.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

security_xfrm_policy_alloc can be called in atomic context so the
allocation should be done with GFP_ATOMIC. Add an argument to let the
callers choose the appropriate way. In order to do so a gfp argument
needs to be added to the method xfrm_policy_alloc_security in struct
security_operations and to the internal function
selinux_xfrm_alloc_user. After that switch to GFP_ATOMIC in the atomic
callers and leave GFP_KERNEL as before for the rest.
The path that needed the gfp argument addition is:
security_xfrm_policy_alloc -> security_ops.xfrm_policy_alloc_security ->
all users of xfrm_policy_alloc_security (e.g. selinux_xfrm_policy_alloc) ->
selinux_xfrm_alloc_user (here the allocation used to be GFP_KERNEL only)

Now adding a gfp argument to selinux_xfrm_alloc_user requires us to also
add it to security_context_to_sid which is used inside and prior to this
patch did only GFP_KERNEL allocation. So add gfp argument to
security_context_to_sid and adjust all of its callers as well.

CC: Paul Moore <paul@paul-moore.com>
CC: Dave Jones <davej@redhat.com>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Fan Du <fan.du@windriver.com>
CC: David S. Miller <davem@davemloft.net>
CC: LSM list <linux-security-module@vger.kernel.org>
CC: SELinux list <selinux@tycho.nsa.gov>
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Acked-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Update the policy version (POLICYDB_VERSION_CONSTRAINT_NAMES) to allow
holding of policy source info for constraints.
Signed-off-by: NRichard Haines <richard_c_haines@btinternet.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

This reverts commit 308ab70c.

It breaks my FC6 test box.  /dev/pts is not mounted.  dmesg says

SELinux: mount invalid.  Same superblock, different security settings
for (dev devpts, type devpts)

Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

Currently the packet class in SELinux is not checked if there are no
SECMARK rules in the security or mangle netfilter tables.  Some systems
prefer that packets are always checked, for example, to protect the system
should the netfilter rules fail to load or if the nefilter rules
were maliciously flushed.

Add the always_check_network policy capability which, when enabled, treats
SECMARK as enabled, even if there are no netfilter SECMARK rules and
treats peer labeling as enabled, even if there is no Netlabel or
labeled IPSEC configuration.

Includes definition of "redhat1" SELinux policy capability, which
exists in the SELinux userpace library, to keep ordering correct.

The SELinux userpace portion of this was merged last year, but this kernel
change fell on the floor.
Signed-off-by: NChris PeBenito <cpebenito@tresys.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Rather than passing pointers to memory locations, strings, and other
stuff just give up on the separation and give security_fs_use the
superblock.  It just makes the code easier to read (even if not easier to
reuse on some other OS)
Signed-off-by: NEric Paris <eparis@redhat.com>

Instead of having special code around the 'non-mount' seclabel mount option
just handle it like the mount options.
Signed-off-by: NEric Paris <eparis@redhat.com>

We only have 6 options, so char is good enough, but use a short as that
packs nicely.  This shrinks the superblock_security_struct just a little
bit.
Signed-off-by: NEric Paris <eparis@redhat.com>

Just to make it clear that we have mount time options and flags,
separate them.  Since I decided to move the non-mount options above
above 0x10, we need a short instead of a char.  (x86 padding says
this takes up no additional space as we have a 3byte whole in the
structure)
Signed-off-by: NEric Paris <eparis@redhat.com>

Just a flag rename as we prepare to make it not so special.
Signed-off-by: NEric Paris <eparis@redhat.com>

There currently doesn't exist a labeling type that is adequate for use with
labeled NFS. Since NFS doesn't really support xattrs we can't use the use xattr
labeling behavior. For this we developed a new labeling type. The native
labeling type is used solely by NFS to ensure NFS inodes are labeled at runtime
by the NFS code instead of relying on the SELinux security server on the client
end.
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMatthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Because Fedora shipped userspace based on my development tree we now
have policy version 27 in the wild defining only default user, role, and
range.  Thus to add default_type we need a policy.28.
Signed-off-by: NEric Paris <eparis@redhat.com>

When new objects are created we have great and flexible rules to
determine the type of the new object.  We aren't quite as flexible or
mature when it comes to determining the user, role, and range.  This
patch adds a new ability to specify the place a new objects user, role,
and range should come from.  For users and roles it can come from either
the source or the target of the operation.  aka for files the user can
either come from the source (the running process and todays default) or
it can come from the target (aka the parent directory of the new file)

examples always are done with
directory context: system_u:object_r:mnt_t:s0-s0:c0.c512
process context: unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023

[no rule]
	unconfined_u:object_r:mnt_t:s0   test_none
[default user source]
	unconfined_u:object_r:mnt_t:s0   test_user_source
[default user target]
	system_u:object_r:mnt_t:s0       test_user_target
[default role source]
	unconfined_u:unconfined_r:mnt_t:s0 test_role_source
[default role target]
	unconfined_u:object_r:mnt_t:s0   test_role_target
[default range source low]
	unconfined_u:object_r:mnt_t:s0 test_range_source_low
[default range source high]
	unconfined_u:object_r:mnt_t:s0:c0.c1023 test_range_source_high
[default range source low-high]
	unconfined_u:object_r:mnt_t:s0-s0:c0.c1023 test_range_source_low-high
[default range target low]
	unconfined_u:object_r:mnt_t:s0 test_range_target_low
[default range target high]
	unconfined_u:object_r:mnt_t:s0:c0.c512 test_range_target_high
[default range target low-high]
	unconfined_u:object_r:mnt_t:s0-s0:c0.c512 test_range_target_low-high
Signed-off-by: NEric Paris <eparis@redhat.com>

Fix sparse warnings in SELinux Netlink code.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

Fixes several sparse warnings for selinuxfs.c
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

Sparse fix: declare selinux_disable() in security.h
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

Sparse fix: move selinux_complete_init
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

Fix sparse warnings in SELinux Netlink code.
Signed-off-by: NJames Morris <jmorris@namei.org>

Fixes several sparse warnings for selinuxfs.c
Signed-off-by: NJames Morris <jmorris@namei.org>

Sparse fix: declare selinux_disable() in security.h
Signed-off-by: NJames Morris <jmorris@namei.org>

Sparse fix: move selinux_complete_init
Signed-off-by: NJames Morris <jmorris@namei.org>

The len should be an size_t but is a ssize_t.  Easy enough fix to silence
build warnings.  We have no need for signed-ness.
Signed-off-by: NEric Paris <eparis@redhat.com>
Reviewed-by: NJames Morris <jmorris@namei.org>

The attached patch allows /selinux/create takes optional 4th argument
to support TYPE_TRANSITION with name extension for userspace object
managers.
If 4th argument is not supplied, it shall perform as existing kernel.
In fact, the regression test of SE-PostgreSQL works well on the patched
kernel.

Thanks,
Signed-off-by: NKaiGai Kohei <kohei.kaigai@eu.nec.com>
[manually verify fuzz was not an issue, and it wasn't: eparis]
Signed-off-by: NEric Paris <eparis@redhat.com>

If kernel policy version is >= 26, then the binary representation of
the role_trans structure supports specifying the class for the current
subject or the newly created object.

If kernel policy version is < 26, then the class field would be default
to the process class.
Signed-off-by: NHarry Ciao <qingtao.cao@windriver.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NEric Paris <eparis@redhat.com>