- 26 3月, 2007 1 次提交
-
-
由 Thomas Graf 提交于
Based upon a patch from Patrick McHardy. The fib_rules netlink attribute policy introduced in 2.6.19 broke userspace compatibilty. When specifying a rule with "from all" or "to all", iproute adds a zero byte long netlink attribute, but the policy requires all addresses to have a size equal to sizeof(struct in_addr)/sizeof(struct in6_addr), resulting in a validation error. Check attribute length of FRA_SRC/FRA_DST in the generic framework by letting the family specific rules implementation provide the length of an address. Report an error if address length is non zero but no address attribute is provided. Fix actual bug by checking address length for non-zero instead of relying on availability of attribute. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 3月, 2007 1 次提交
-
-
由 Dave Jones 提交于
Turning up the warnings on gcc makes it emit warnings about the placement of 'inline' in function declarations. Here's everything that was under net/ Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2007 1 次提交
-
-
由 Masayuki Nakagawa 提交于
The ipv6_fl_socklist from listening socket is inadvertently shared with new socket created for connection. This leads to a variety of interesting, but fatal, bugs. For example, removing one of the sockets may lead to the other socket's encountering a page fault when the now freed list is referenced. The fix is to not share the flow label list with the new socket. Signed-off-by: NMasayuki Nakagawa <nakagawa.msy@ncos.nec.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2007 2 次提交
-
-
由 Chris Wright 提交于
User supplied len < 0 can cause leak of kernel memory. Use unsigned compare instead. Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olaf Kirch 提交于
I came across this bug in http://bugzilla.kernel.org/show_bug.cgi?id=8155Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2007 3 次提交
-
-
由 Herbert Xu 提交于
Now that we add the IPv6 device at registration time we don't need to set IF_READY in ipv6_add_dev anymore because we will always get a NETDEV_UP event later on should the device ever become ready. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The individual fragments of a packet reassembled by conntrack have the conntrack reference from the reassembled packet attached, but nfctinfo is not copied. This leaves it initialized to 0, which unfortunately is the value of IP_CT_ESTABLISHED. The result is that all IPv6 fragments are tracked as ESTABLISHED, allowing them to bypass a usual ruleset which accepts ESTABLISHED packets early. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 3月, 2007 2 次提交
-
-
由 Yasuyuki Kozakai 提交于
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The nf_conntrack_netlink config option is named CONFIG_NF_CT_NETLINK, but multiple files use CONFIG_IP_NF_CONNTRACK_NETLINK or CONFIG_NF_CONNTRACK_NETLINK for ifdefs. Fix this and reformat all CONFIG_NF_CT_NETLINK ifdefs to only use a line. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2007 2 次提交
-
-
由 David Stevens 提交于
Reading /proc/net/anycast6 when there is no anycast address on an interface results in an ever-increasing inet6_dev reference count, as well as a reference to the netdevice you can't get rid of. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Wrobel 提交于
This patch fixes a bug in Linux IPv6 stack which caused anycast address to be added to a device prior DAD has been completed. This led to incorrect reference count which resulted in infinite wait for unregister_netdevice completion on interface removal. Signed-off-by: NMichal Wrobel <xmxwx@asn.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 2月, 2007 7 次提交
-
-
由 David S. Miller 提交于
It needs to be in net/ipv6/addrconf_core.c Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Allocate inet6_dev earlier to allow users to set up per-interface variables. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
It is more natural to manage prefix routes corresponding to address which is being added manually. With help from Masafumi Aramoto <aramoto@linux-ipv6.org>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Yasuyuki Kozakai 提交于
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Link __ipv6_addr_type() statically for sunrpc code even if IPv6 is built as module. Signed-off-by: NYOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org>
-
由 Joe Jin 提交于
This patch for adjust inet6_exit() to inverse sequence to inet6_init(). At ipv6_init, it first create proc_root/net/dev_snmp6 entry by call ipv6_misc_proc_init(), then call addrconf_init() to create the corresponding device entry at this directory, but at inet6_exit, ipv6_misc_proc_exit() called first, then call addrconf_init(). Signed-off-by: NJoe Jin <joe.jin@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Noriaki TAKAMIYA 提交于
Fixed to set fl_tunnel.fl6_src correctly in xfrm6_bundle_create(). Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp> Acked-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2007 3 次提交
-
-
由 Eric W. Biederman 提交于
It isn't needed anymore, all of the users are gone, and all of the ctl_table initializers have been converted to use explicit names of the fields they are initializing. [akpm@osdl.org: NTFS fix] Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2007 2 次提交
-
-
由 Kazunori MIYAZAWA 提交于
This patch changes xfrm6_tunnel register and deregister interface to prepare for solving the conflict of device tunnels with inter address family IPsec tunnel. There is no device which conflicts with IPv4 over IPv6 IPsec tunnel. Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazunori MIYAZAWA 提交于
This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2007 7 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Tetsuo Handa <handat@pm.nttdata.co.jp> told me that connect(2) with TCPv6 socket almost always took a few minutes to return when we did not have any ports available in the range of net.ipv4.ip_local_port_range. The reason was that we used incorrect seed for calculating index of hash when we check established sockets in __inet6_check_established(). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
Regarding RFC3775, MH payload proto field should be IPPROTO_NONE. Otherwise it must be discarded (and the receiver should send ICMP error). We assume filter should drop such piggyback everytime to disallow slipping through firewall rules, even the final receiver will discard it. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Instead of depending on internally needed options and letting users figure out what is needed, select them when needed: - IP_NF_IPTABLES, IP_NF_ARPTABLES and IP6_NF_IPTABLES select NETFILTER_XTABLES - NETFILTER_XT_TARGET_CONNMARK, NETFILTER_XT_MATCH_CONNMARK and IP_NF_TARGET_CLUSTERIP select NF_CONNTRACK_MARK - NETFILTER_XT_MATCH_CONNBYTES selects NF_CT_ACCT Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
NF_CT_STAT_INC assumes rcu_read_lock in nf_hook_slow disables preemption as well, making it legal to use __get_cpu_var without disabling preemption manually. The assumption is not correct anymore with preemptable RCU, additionally we need to protect against softirqs when not holding nf_conntrack_lock. Add NF_CT_STAT_INC_ATOMIC macro, which disables local softirqs, and use where necessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in all paths not obviously only used within packet process context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
- rename nf_logging to nf_loggers since its an array of registered loggers - rename nf_log_unregister_logger() to nf_log_unregister() to make it symetrical to nf_log_register() and convert all users Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 1 次提交
-
-
由 Robert P. J. Day 提交于
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the corresponding "kmem_cache_zalloc()" call. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Roland McGrath <roland@redhat.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Acked-by: NJoel Becker <Joel.Becker@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2007 4 次提交
-
-
由 Masahide NAKAMURA 提交于
It seems to miss RO mode path by IPv6 over IPv4 IPsec tunnel patch when it changed semantics to check the mode from "xfrm[i]->props.mode != XFRM_MODE_TRANSPORT" to "xfrm[i]->props.mode == XFRM_MODE_TUNNEL" before changing address. It also makes two incline functions __xfrm6_bundle_addr_{remote,local} are used by nobody. This patch fixes it. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This patch removes the next pointer from 'struct rt6_info.u' union, and renames u.next to u.dst.rt6_next. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In a prior patch, I introduced a sk_hash field (__sk_common.skc_hash) to let tcp lookups use one cache line per unmatched entry instead of two. We can also use sk_hash to speedup UDP part as well. We store in sk_hash the hnum value, and use sk->sk_hash (same cache line than 'next' pointer), instead of inet->num (different cache line) Note : We still have a false sharing problem for SMP machines, because sock_hold(sock) dirties the cache line containing the 'next' pointer. Not counting the udp_hash_lock rwlock. (did someone mentioned RCU ? :) ) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 4 次提交
-
-
由 Eric Dumazet 提交于
ehash table layout is currently this one : First half of this table is used by sockets not in TIME_WAIT state Second half of it is used by sockets in TIME_WAIT state. This is non optimal because of for a given hash or socket, the two chain heads are located in separate cache lines. Moreover the locks of the second half are never used. If instead of this halving, we use two list heads in inet_ehash_bucket instead of only one, we probably can avoid one cache miss, and reduce ram usage, particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep together related chains to speedup lookups and socket state change. In this patch I did not try to align struct inet_ehash_bucket, but a future patch could try to make this structure have a convenient size (a power of two or a multiple of L1_CACHE_SIZE). I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so maybe we dont need to scratch our heads to align the bucket... Note : In case struct inet_ehash_bucket is not a power of two, we could probably change alloc_large_system_hash() (in case it use __get_free_pages()) to free the unused space. It currently allocates a big zone, but the last quarter of it could be freed. Again, this should be a temporary 'problem'. Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Move ip6t_standard/ip6t_error_target/ip6t_error definitions to ip6_tables.h instead of defining them in each table individually. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
This introduces match for Mobility Header (MH) described by Mobile IPv6 specification (RFC3775). User can specify the MH type or its range to be matched. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NYasuyuki Kozakai <kozakai@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-