Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

minimum_to_wake is unique to N_TTY processing, and belongs in
per-ldisc data.

Add the ldisc method, ldisc_ops::fasync(), to notify line disciplines
when signal-driven I/O is enabled or disabled. When enabled for N_TTY
(by fcntl(F_SETFL, O_ASYNC)), blocking reader/polls will be woken
for any readable input. When disabled, blocking reader/polls are not
woken until the read buffer is full.

Canonical mode (L_ICANON(tty), n_tty_data::icanon) is not affected by
the minimum_to_wake setting.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In the runtime_suspend function pdata is not being used, and
also blocks the function in device tree based booting. Fix it
by removing the unused pdata from the runtime_suspend function.

Further, context loss count is not being passed in pdata, so
let's just reinitialize the port every time for those case.
This can be further optimized later on for the device tree
case by adding detection for the hardware state and possibly
by adding a driver specific autosuspend timeout.

And doing this, we can then make the related dev_err into a
dev_dbg message instead of an error.

In order for the wake-up events to work, we also need to set
autosuspend_timeout to -1 if 0, and also device_init_wakeup()
as that's not being done by the platform init code for the
device tree case.

Note that this does not affect legacy booting, and in fact
might make it work for the cases where the context loss info
is not being passed in pdata.

Thanks to Kevin Hilman <khilman@linaro.org> for debugging
and suggesting fixes for the autosuspend_timeout and
device_init_wakeup() related initializiation.
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 0c375501 (serial: imx: enable the clocks for console), the
imx_startup() function calls clk_prepare_enable conditionally, so we
need to call clk_disable_unprepare inside imx_shutdown() under the same
condition to avoid unbalanced clock calls.

This avoids the following warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 70 at drivers/clk/clk.c:780 __clk_disable+0x68/0x84()
Modules linked in:
CPU: 0 PID: 70 Comm: mountall Not tainted 3.10.0-rc4-next-20130607+ #435
Backtrace:
[<800116a4>] (dump_backtrace+0x0/0x10c) from [<80011844>] (show_stack+0x18/0x1c)
 r6:8069f4e8 r5:0000030c r4:00000000 r3:00000000
[<8001182c>] (show_stack+0x0/0x1c) from [<8053bce0>] (dump_stack+0x78/0x94)
[<8053bc68>] (dump_stack+0x0/0x94) from [<80023df8>] (warn_slowpath_common+0x6c/0x8c)
 r4:00000000 r3:00000000
[<80023d8c>] (warn_slowpath_common+0x0/0x8c) from [<80023e3c>] (warn_slowpath_null+0x24/0x2c)
 r8:bf2ed008 r7:bfaa9810 r6:000f0013 r5:bf824b80 r4:bf824b80
[<80023e18>] (warn_slowpath_null+0x0/0x2c) from [<8041af84>] (__clk_disable+0x68/0x84)
[<8041af1c>] (__clk_disable+0x0/0x84) from [<8041b098>] (clk_disable+0x20/0x2c)
 r4:600f0013 r3:00000001
[<8041b078>] (clk_disable+0x0/0x2c) from [<802c93e8>] (imx_shutdown+0xbc/0xec)
 r5:bf824b80 r4:bfaa9810
[<802c932c>] (imx_shutdown+0x0/0xec) from [<802c63a0>] (uart_port_shutdown+0x34/0x40)
 r5:bf86f860 r4:bfaa9810
[<802c636c>] (uart_port_shutdown+0x0/0x40) from [<802c68c0>] (uart_shutdown+0x98/0xc4)
 r4:bf86f800 r3:00000000
[<802c6828>] (uart_shutdown+0x0/0xc4) from [<802c7514>] (uart_close+0x5c/0x198)
 r7:bfaa9810 r6:bf274400 r5:bf86f86c r4:bf86f800
[<802c74b8>] (uart_close+0x0/0x198) from [<802ac648>] (tty_release+0xf8/0x500)
[<802ac550>] (tty_release+0x0/0x500) from [<800c5a30>] (__fput+0x9c/0x208)
[<800c5994>] (__fput+0x0/0x208) from [<800c5bac>] (____fput+0x10/0x14)
[<800c5b9c>] (____fput+0x0/0x14) from [<80040234>] (task_work_run+0xb4/0xec)
[<80040180>] (task_work_run+0x0/0xec) from [<80029238>] (do_exit+0x2b0/0x920)
 r8:8000e144 r7:000000f8 r6:bf306300 r5:00000000 r4:bfac1180
[<80028f88>] (do_exit+0x0/0x920) from [<80029a4c>] (do_group_exit+0x50/0xd4)
 r7:000000f8
[<800299fc>] (do_group_exit+0x0/0xd4) from [<80029ae8>] (__wake_up_parent+0x0/0x28)
 r7:000000f8 r6:00000001 r5:0006f7ae r4:0006f79a
[<80029ad0>] (SyS_exit_group+0x0/0x18) from [<8000dfc0>] (ret_fast_syscall+0x0/0x30)
---[ end trace 16d080eb7efea4e9 ]---
Reported-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This bug appear when a second PSC based driver appends an interrupt
routine to the FIFO controller shared interrupt (like spi-mpc512x-psc).
When reboot, uart_shutdown() remove the serial console interrupt handler
while spi-mpc512x-psc isr is still activate and cause the following kernel
panic:

The system is going down for reboot NOW!rpc (ttyPSC0) (Mon Jun 10 12:26:07 20
INIT: Sending processirq 40: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc4-next-20130607-00001-ga0bceb3-dirty #5
Call Trace:
[cfff9f00] [c0007910] show_stack+0x48/0x150 (unreliable)
[cfff9f40] [c005ae60] __report_bad_irq.isra.6+0x34/0xe0
[cfff9f60] [c005b194] note_interrupt+0x214/0x26c
[cfff9f90] [c00590fc] handle_irq_event_percpu+0xd0/0x1bc
[cfff9fd0] [c005921c] handle_irq_event+0x34/0x54
[cfff9fe0] [c005b8f4] handle_level_irq+0x90/0xf4
[cfff9ff0] [c000cb98] call_handle_irq+0x18/0x28
[c050dd60] [c000575c] do_IRQ+0xcc/0x124
[c050dd90] [c000eb04] ret_from_except+0x0/0x14
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When using MFD HSU based console, sometime we need the sysrq function
to help debugging kernel. The sysrq code is basically there, this
patch just simply enable it.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The console's clocks are disabled after the uart driver is probed.
It makes that we can see less log from the console now
(though we still can get all the log by the `dmesg`).

So enable the clocks for console, and we can see all the log again.

This patch also disables the sport->clk_per when we fail to enable
the sport->clk_ipg;
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Freescale lpuart driver support. The lpuart device
can be found on Vybrid VF610 and Layerscape LS-1 SoCs.
Signed-off-by: NJingchang Lu <b35083@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some improvements in the Kconfig text:

- Vendor is Freescale now
- Provide a better example for the console parameter, which is something like
console=ttymxc0
- Do not pass the names of ancient bootloaders
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to only allow the serial driver to be built-in.

Allow the imx serial driver to be built as a module.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When CONFIG_SERIAL_IMX_CONSOLE is not selected the following build warnings
appear:

drivers/tty/serial/imx.c:274:13: warning: 'imx_port_ucrs_save' defined but not used [-Wunused-function]
drivers/tty/serial/imx.c:283:13: warning: 'imx_port_ucrs_restore' defined but not used [-Wunused-function]

imx_port_ucrs_save() and imx_port_ucrs_restore() are only used when
CONFIG_CONSOLE_POLL or CONFIG_SERIAL_IMX_CONSOLE are selected, so protect these
functions declaration with a proper ifdef.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If pinctrl_get_select_default() fails, sirfsoc_uart_probe()
returns IS_ERR(result) instead of PTR_ERR(result).

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dereference to 'up' should be moved below the NULL test.
Introduced by commit ddd85e22
(serial: omap: prevent runtime PM for "no_console_suspend")
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable it in Kconfig.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code opens the clocks when the uart driver is probed.
This will wastes some power if several uarts are enabled, but not really
used.

So close these clocks for uart, and enable the clocks only when
the uart is used.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support for the Stallion multiport serial drivers was removed in v3.1.
Clean up their last references in the tree: mainly an outdated Kconfig
entry and unneeded documentation.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The uart works in the DCE mode by default, but sometime we need it
works at the DTE mode.

This patch adds the support for the DTE mode.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A recent bug fix in 3.10, ddd85e22 "serial: omap: prevent runtime PM for
"no_console_suspend"", introduced a regression from an obvious typo:

drivers/tty/serial/omap-serial.c:1677:14: error: 'serial_omap_complete'
	undeclared here (not in a function)

This changes the incorrectly added macro to the one that we need instead.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NBin Liu <b-liu@ti.com>
Acked-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

when platform_driver_register broken, we should unregister ucc_uart_driver
Signed-off-by: NLibo chen <libo.chen@huawei.com>
Acked-by: NTimur Tabi <timur@tabi.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the missing uart_unregister_driver() before return from
s3c24xx_serial_modinit() in the error handling case.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add MPC5125 PSC register layout structure, MPC5125 specific
psc_ops function set and the compatible string.
Signed-off-by: NVladimir Ermakov <vooon341@gmail.com>
Signed-off-by: NMatteo Facchinetti <matteo.facchinetti@sirius-es.it>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

MPC5125 PSC controller has different register layout than MPC5121.
To support MPC5125 PSC in this driver we have to provide further
psc_ops functions for SoC specific register accesses.

Add new register access functions to the psc_ops structure and
provide MPC52xx and MPC512x specific implementation for them.
Then replace remaining direct register accesses in the driver by
appropriate psc_ops function calls. The subsequent patch can now
add MPC5125 specific set of psc_ops functions.
Signed-off-by: NVladimir Ermakov <vooon341@gmail.com>
Signed-off-by: NMatteo Facchinetti <matteo.facchinetti@sirius-es.it>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Also, unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'wmt_dt_ids' is always compiled in. Hence of_match_ptr is not
necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit cfcec52e.

This regresses a longstanding behaviour on X86 systems, which end up with
PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite
sides of this commit, resulting in the need to constantly modify the console
setting in order to bisect across it.

Please revert, we can work on solving this for ARM platforms in a less
disruptive way.
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
Cc: Karthik Manamcheri <karthik.manamcheri@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Ensure that the uart controller clock is enabled prior to writing to the
interrupt mask and pending registers in the s3c24xx_serial_init_port
function.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We only want to enable hardware flow control if RTS/CTS pins
are connected.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: mxser: Fix build warning introduced by dfc7b837 (Re: linux-next: build warning after merge of the tty.current tree)

Fix build warning at mxser.c introduced by dfc7b837 (tty: mxser: fix
usage of opmode_ioaddr)
Signed-off-by: NMatwey V. Kornilov <matwey@sai.msu.ru>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mxser_port->opmode_ioaddr is initialized only for MOXA_MUST_MU860_HWID
chips, but no precautions have been undertaken to prevent reading and
writing to undefined port number.
Signed-off-by: NMatwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the same controller as on Intel Lynxpoint but the
ACPI ID is different.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Impact:
1:convert all remain take_over_console to do_take_over_console
2:update take_over_console to do_take_over_console in comment

Commit dc964189 ("vt: delete unneeded functions
register_con_driver|take_over_console") delete take_over_console,
but forget to convert remain take_over_console's users to new API
do_take_over_console, this patch fix it.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The semantics of a rw semaphore are almost ideally suited
for tty line discipline lifetime management;  multiple active
threads obtain "references" (read locks) while performing i/o
to prevent the loss or change of the current line discipline
(write lock).

Unfortunately, the existing rw_semaphore is ill-suited in other
ways;
1) TIOCSETD ioctl (change line discipline) expects to return an
   error if the line discipline cannot be exclusively locked within
   5 secs. Lock wait timeouts are not supported by rwsem.
2) A tty hangup is expected to halt and scrap pending i/o, so
   exclusive locking must be prioritized.
   Writer priority is not supported by rwsem.

Add ld_semaphore which implements these requirements in a
semantically similar way to rw_semaphore.

Writer priority is handled by separate wait lists for readers and
writers. Pending write waits are priortized before existing read
waits and prevent further read locks.

Wait timeouts are trivially added, but obviously change the lock
semantics as lock attempts can fail (but only due to timeout).

This implementation incorporates the write-lock stealing work of
Michel Lespinasse <walken@google.com>.

Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now there is no place use unregister_con_driver,
and we can achieve unregister_con_driver's function
with unregister_con_driver easily, so just delete it
to reduce code size and duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There are only two place use unregister_con_driver now, this patch
convert them to do_unregister_con_driver too, then we can delete
unregister_con_driver whos function can be achieved with do_unregister_con_driver
easily to reduce code size and duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now there is no place use bind_con_driver,
and do_bind_con_driver can achieve bind_con_driver's
function easily, so just delete it to reduce code size and
duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one place use bind_con_driver now, this patch
convert it to do_bind_con_driver too, then we can delete
bind_con_driver whos function can be replaced by do_bind_con_driver
easily to reduce code size and duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now there is no place use unbind_con_driver,
and we can achieve unbind_con_driver's function
with do_unbind_con_driver easily, so just delete
it to reduce code size and duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one place use unbind_con_driver, this patch
convert it to do_unbind_con_driver too, then we can delete
unbind_con_driver to reduce code size and duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now there is no place use register_con_driver|take_over_console,
and we can achieve their function with do_register_con_driver|
do_take_over_console easily, so just delete them to reduce code duplication.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>