From Michal Simek:

arm: Xilinx Zynq dt changes for v3.11

The branch contains:
- DT uart handling cleanup
- Support for zc706 and zed board
- Removal of board compatible string

* tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx:
  arm: dt: zynq: Add support for the zed platform
  arm: dt: zynq: Add support for the zc706 platform
  arm: dt: zynq: Use 'status' property for UART nodes
  arm: zynq: Remove board specific compatibility string
  clk: zynq: Remove deprecated clock code
  arm: zynq: Migrate platform to clock controller
  clk: zynq: Add clock controller driver
  clk: zynq: Factor out PLL driver
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add a DT fragment for the Zed Zynq platform and a corresponding
target to the Makefile
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add a DT fragment for the zc706 Zynq platform and a corresponding
target to the Makefile.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Set the default status for UARTs to disabled in the zynq-7000.dtsi file
and let board dts files enable the UARTs on demand.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

It is not necessary to have board specific compatibility strings
in the platform code. The board dts files can use the more generic
'xlnx,zynq-7000' string.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

From Nicolas Ferre:
Again some nice DT updates for AT91:
- DMA binding update with one patch shared with slave-dma tree
- more SPI DT activation
- enable the USB gadget HS for DT platforms

* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91: sam9m10g45ek add udc DT support
  ARM: at91: sam9g45 add udc DT support
  ARM: at91: sam9x5ek add udc DT support
  ARM: at91: sam9x5 add udc DT support
  ARM: at91: dt: at91sam9x5: add SPI DMA client infos
  ARM: at91: dt: switch DMA DT bindings to pre-processor
  ARM: at91: dt: add header to define at_hdmac configuration

From Maxime Ripard:
Allwinner SoCs DT additions for 3.11
  - Switch to using the sun5i clocks for the A13
  - Register the pio node as an interrupt controller

* tag 'sunxi-dt-for-3.11' of git://github.com/mripard/linux:
  ARM: sunxi: dt: Register the pio node as interrupt controller
  ARM: sun5i: Update the clock compatible strings
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'tegra-for-3.11-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt

From Stephen Warren:
ARM: tegra: device tree updates

This branch contains all device tree updates for Tegra boards.

The changes are:

* Converted all DT files to use the C pre-processor, to support the use
  of named constants. This included use of defines for GPIO, IRQ, and
  clock constants.
* Enabling new features such as:
  - SPI on Dalmore.
  - Audio on Dalmore and Beaver.
  - gpio-leds on Beaver.
  - Power-supply/batter linkage on Dalmore.
* A minor fix to the RAM size node on Beaver.

It is based on previous pull request tegra-for-3.11-deps-for-usb
followed by a merge of tegra-for-3.11-deps-for-clk.

* tag 'tegra-for-3.11-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (21 commits)
  ARM: tegra: enable audio on Beaver
  ARM: tegra: enable audio on Dalmore
  ARM: tegra: add power-supplies link between battery and charger
  ARM: tegra: add audio-related nodes to Tegra114 DT
  ARM: tegra114: convert device tree files to use CLK defines
  ARM: tegra30: convert device tree files to use CLK defines
  ARM: tegra20: convert device tree files to use CLK defines
  ARM: tegra: Add charger subnode to tps65090 node
  ARM: tegra: convert device tree files to use IRQ defines
  ARM: tegra: convert device tree files to use GPIO defines
  ARM: tegra: create a DT header defining GPIO IDs
  ARM: tegra: use #include for all device trees
  ARM: tegra: Add gpio-leds to Tegra30 Beaver
  ARM: tegra: fix memory size on Beaver
  ARM: tegra: enable spi4 on Dalmore
  ARM: tegra114: create a DT header defining CLK IDs
  ARM: tegra30: create a DT header defining CLK IDs
  ARM: tegra20: create a DT header defining CLK IDs
  ARM: tegra: update device trees for USB binding rework
  ARM: tegra: modify ULPI reset GPIO properties
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'bcm2835-for-3.11-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/dt

From Stephen Warren:
ARM: bcm2835: device tree updates

Just one patch this time: enable the LED via gpio-leds.

* tag 'bcm2835-for-3.11-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: Add Raspberry Pi's ACT LED to DT
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:
Device tree patches for ux500, basically trees and auxdata:
- Fix for the thermal node to be contained in the PRCMU node
- Add the DTS and auxdata needed to boot the U8540 platform
- Various regulators added and renamed
- Rename base SoC node
- A bunch of DMA patches adding channels for DT boots
- A bunch of crypto+hash patches adding config for DT boots
- A bunch of patches fixing the ALSA SoC support to work
- Register the LP5521 LEDs
- Fix a number of typos and naming errors

* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits)
  ARM: ux500: drop any 0x prefix from I2C DT devices
  ARM: ux500: Allocate correct amount of memory for the u8540 in DT
  ARM: ux500: Provide auxdata to ux500 ASoC driver
  ARM: ux500: Add DT regulators for ab8500-codec
  ARM: ux500: Correct anamic2 typo in DT files
  ARM: ux500: Fix trivial typo in v-anamic1 comment
  ARM: ux500: Reduce PRCMU reg-names to shorter form for u8540 DT
  ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up
  ARM: ux500: cut chip-select GPIOs from SSP device
  ARM: ux500: use symbolic names for interrupt flags
  ARM: ux500: use #include syntax to include *.dtsi.
  ARM: ux500: bump MMC/SD max frequency for DT boots
  ARM: ux500: Apply other compatible name to the u8540 DTS file
  pinctrl/nomadik: Standardise Pinctrl compat string for DBx5x based platforms
  ARM: ux500: Standardise Pinctrl compatible string for DBx5x based platforms
  ARM: ux500: Standardise DBx5x0 based Pinctrl compat string in the DTS
  crypto: ux500/hash - Enable DT probing of the driver
  crypto: ux500/cryp - Enable DT probing of the driver
  ARM: ux500: enable the crypto and hash on all dbx500
  ARM: ux500: Provide an AUXDATA entry for ux500-hash
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NBo Shen <voice.shen@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NBo Shen <voice.shen@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NBo Shen <voice.shen@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NBo Shen <voice.shen@atmel.com>

Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

DMA-cell content is a concatenation of several values. In order to keep this
stuff human readable, macros are introduced.

The values for the FIFO configuration are not the same as the ones used in the
configuration register in order to keep backward compatibility. Most devices
use the half FIFO configuration but USART ones have to use the ASAP
configuration. This parameter was not initially planed to be into the at91 dma
dt binding. The third cell will be used to store this parameter, it will
become a concatenation of the FIFO configuration and of the peripheral ID. In
order to keep backward compatibility i.e. FIFO configuration is equal to 0, we
have to perform a translation since the value to put in the register to set
half FIFO is 1.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

From Jason Cooper:
mvebu dt changes for v3.11 (round 5)
 - mvebu
    - set aliases for ethernet interfaces
    - PCIe range for armada-xp-db
    - rm unused properties on A370
 - kirkwood
    - assign sheevaplug pinmuxs to correct devices
    - enable second PCIe port for ts219

* tag 'dt-3.11-5' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood: ts219: Enable second PCIe port in DT.
  ARM: mvebu: Remove device tree unused properties on A370
  arm: mvebu: armada-xp-db: ensure PCIe range is specified
  arm: kirkwood: sheevaplug: move pinmux configs to the right devices
  ARM: mvebu: set aliases for ethernet controllers
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:
Update exynos DT for
- usb3phy and dwc3 for exynos5250
- keypad for exynos4412
- TMU clock for exynos4210
- MFC clock for exynos4
- DP controller for exynos5250
- G2D clock for exynos4
- some exynos boards

* tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits)
  ARM: dts: add ohci and ehci controller nodes for EXYNOS5440
  ARM: dts: Update G2D documentation for clock entries
  ARM: dts: Add clock entries to G2D node for exynos4x12
  ARM: dts: Add clock entries to G2D node for exynos4210
  ARM: dts: Remove duplicate and add missing G2D nodes
  clk: exynos4: Add additional G2D clocks
  ARM: dts: Document DP clock in samsung,exynos5-dp binding
  ARM: dts: add pin state information for DP HPD support to Exynos5250
  ARM: dts: add dts node for the ahci sata exynos5440
  ARM: dts: add vmmc regulator support for ODROID-X
  ARM: dts: add max77686 node entry for ODROID-X
  ARM: dts: Enable RTC by default on EXYNOS5440
  ARM: dts: Add display timing node to exynos5250-arndale.dts
  ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC
  ARM: dts: Add DT node for DP controller for Arndale Board
  ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi
  ARM: dts: add max8997 device node for exynos4210-origen board
  ARM: dts: Enable TMU on Origen4210 board
  ARM: dts: Add TMU clock entries to exynos4210.dtsi
  ARM: dts: Update MFC documentation for clock entries
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 's3c24xx-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim, DT changes for s3c24xx.

* tag 's3c24xx-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add devicetree support for s3c2416-smdk2416
Signed-off-by: NOlof Johansson <olof@lixom.net>

Beaver uses the RT5640 audio CODEC. Instantiate this on the I2C bus, and
add the top-level "sound" node to hook everything together and provide a
"sound card" device.
Signed-off-by: NStephen Warren <swarren@nvidia.com>

Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus.
Enable the relevant Tegra I2C controller. Add the top-level "sound" node
to hook everything together, and provide a "sound card" device.
Signed-off-by: NStephen Warren <swarren@nvidia.com>

The power supply core now supports detecting linkages between batteries
and chargers through the use of the power-supplies property. Adding
this to the battery, the core will use the phandle list to find
the associated charger and pair them up. This facilitates notifications
from the charger to the battery when ac power is dissconnected
or connected for instance.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

Add bindings for "socfpga-gate-clk" clocks. These clocks directly feed
the peripherals.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add entry for 2nd GMAC controller. Add the correct clocks for the GMAC.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>

v2:
- Moved "disabled" status to dtsi file
Signed-off-by: NOlof Johansson <olof@lixom.net>

EXYNOS5440 includes both OHCI and EHCI usb host controllers.
This patch adds device tree nodes for both of them. And the
EHCI and OHCI controllers on exynos5440 do not need any
explicit phy configuration. So need to assign a different
compatible value for these controllers.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Added clock entry definitions to G2D bindings document.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Added clock entries to G2D node for exynos4x12 DT file.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Added clock entries to G2D node.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

G2D node got added twice in exynos4412-smdk4412.dts instead of
getting added to exynos4412-origen.dts. Remove the duplicate entry
and add it to exynos4412-origen.dts.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add G2D clocks for Exynos4x12 SoC and sclk_fimg2d required by G2D
IP.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The exynos5-dp node needs a clock specified using the common clock
framework.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add pin state information for DP HPD support that requires
pin configuration support using pinctrl interface.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds dts support for the sata controller
Signed-off-by: NGirish K S <ks.giri@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch is to add vmmc regulator node at MSHC and SDHCI for ODROID-X
board file.
Signed-off-by: NDongjin Kim <tobetter@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Enable the second PCIe port on QNAP TS-11x/TS-21x devices as newer
revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Merge tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM-based SoC DT updates for v3.11

* Armadillo800eva reference DT - bring up armadillo800eva baord
  using DT as much as possible
* Remove unused GIC dtsi entries for r8a7790 and r8a73a4
* Add AS3711 and CPUFreq DT bindings for kzm9g-reference
* Add irqpin DT support for marzen-reference

* tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: marzen-reference: add irqpin support in DT
  ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings
  ARM: shmobile: armadillo800eva: Reference DT implementation
  ARM: shmobile: Remove unused r8a7790 GIC CPU interface DT bits
  ARM: shmobile: Remove unused r8a73a4 GIC CPU interface DT bits
  ARM: shmobile: r8a7740: Prepare for reference DT setup
  ARM: shmobile: r8a7740: Add OF support to initialze the GIC
Signed-off-by: NOlof Johansson <olof@lixom.net>

From Jason Cooper:
mvebu dt changes for v3.11 (round 4)

 - kirkwood
    - reshuffle nodes from kirkwood.dtsi to -6281.dtsi, etc
    - add i2c-gpio for km_kirkwood
    - add cpu node so pending cpufreq driver will init

* tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
  ARM: kirkwood: add i2c-gpio controller for km_kirkwood
  ARM: kirkwood: refactor dtsi to largest common nodes
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

A recent series has added CPU numbers to a lot of dts files,
but unfortunately in a few cases the #address-cells
and #size-cells values are missing, which causes build warnings.
This adds the missing ones for sunxi and sama5 that I found
through build testing.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>