- 08 11月, 2011 1 次提交
-
-
由 Yong Zhang 提交于
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 02 11月, 2010 1 次提交
-
-
由 Uwe Kleine-König 提交于
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 16 1月, 2009 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 08 1月, 2009 1 次提交
-
-
由 Jim Paris 提交于
Add ps3vram driver, which exposes unused video RAM on the PS3 as a MTD device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. Signed-off-by: NVivien Chappelier <vivien.chappelier@free.fr> Signed-off-by: NJim Paris <jim@jtan.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 12月, 2008 1 次提交
-
-
由 Geert Uytterhoeven 提交于
commit 059e4938 ("powerpc/ps3: Add a sub-match id to ps3_system_bus") forgot to update the module alias support: - Add the sub-match ids to the module aliases, so udev can distinguish between different types of sub-devices. - Rename PS3_MODULE_ALIAS_GRAPHICS to PS3_MODULE_ALIAS_GPU_FB, as ps3fb binds to the "FB" sub-device. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 06 11月, 2008 1 次提交
-
-
由 Masakazu Mokuno 提交于
Free dynamically allocated device data structures when device registration fails. This fixes memory leakage when the registration fails. Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 7月, 2008 1 次提交
-
-
由 Masakazu Mokuno 提交于
Add sub match id for ps3 system bus so that two different system bus devices can be connected to a shared device. Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 01 4月, 2008 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Split the device setup code in ps3_register_repository_device() in two routines: 1. ps3_setup_static_device(), to handle the setup of static devices in the PS3 repository, which can be __init, 2. ps3_setup_dynamic_device(), to handle the setup of storage devices that may appear later in the PS3 repository. This fixes a few section mismatch warnings. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 25 1月, 2008 4 次提交
-
-
由 Geoff Levand 提交于
Add PS3 logical performance monitor device support to the PS3 system-bus and platform device registration routines. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
PS3: Add repository polling loop to work around timing bug On some firmware versions (e.g. 1.90), the storage device may not show up in the repository immediately after receiving the notification message. Add a small polling loop to make sure we don't miss it. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
The PS3 hypervisor has a storage device notification mechanism to wait until a storage device is ready. Unfortunately the storage device probing code used this mechanism in an incorrect way, needing a polling loop and handling of devices that are not yet ready. This change corrects this by: - First waiting for the reception of an asynchronous notification that a new storage device became ready, - Then looking up the storage device in the device repository. On shutdown, the storage probe thread is stopped and the storage notification device is closed using a reboot notifier. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Change the PS3 bus_id and dev_id from type unsigned int to u64. These IDs are 64-bit in the repository, and the special storage notification device has a device ID of ULONG_MAX. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 9月, 2007 1 次提交
-
-
由 Geoff Levand 提交于
Add some more info to the PS3 storage probe debug output. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 8月, 2007 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Fix probing of PS3 storage devices: in the success case, we should set `error' to zero, not `result'. Without this patch no storage devices are found. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 8月, 2007 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Fix the PS3 storage probe logic to properly find device regions on cold startup. o Change the storage probe event mask from notify_device_ready to notify_region_update. o Improve the storage probe error handling. o Change ps3_storage_wait_for_device() to use a temporary variable to hold the buffer address. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 28 6月, 2007 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Add support for storage devices to the device probe code. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add routines to probe devices present on the system and to register those devices with the LDM. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-