- 10 7月, 2012 4 次提交
-
-
由 Richard Zhao 提交于
Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: NRichard Zhao <richard.zhao@freescale.com> Reviewed-by: NMarek Vasut <marex@denx.de> Acked-by: NFelipe Balbi <balbi@ti.com> Tested-by: NSubodh Nijsure <snijsure@grid-net.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Richard Zhao 提交于
This let usb phy driver has a chance to change hw settings when connect status change. Signed-off-by: NRichard Zhao <richard.zhao@freescale.com> Acked-by: NFelipe Balbi <balbi@ti.com> Tested-by: NSubodh Nijsure <snijsure@grid-net.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Richard Zhao 提交于
Platform drivers do the similar things to add/remove ci13xxx device, so create a unified one. Signed-off-by: NRichard Zhao <richard.zhao@freescale.com> Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Richard Zhao 提交于
struct ci13xxx represent the controller, which may be device or host, so name its variables as ci. Signed-off-by: NRichard Zhao <richard.zhao@freescale.com> Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: NMarek Vasut <marex@denx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 7月, 2012 3 次提交
-
-
由 Richard Zhao 提交于
This patch rename struct ci13xxx_udc_driver and var with the type. ci13xxx_platform_data reflect it's passed from platfrom driver. Signed-off-by: NRichard Zhao <richard.zhao@freescale.com> Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
When using urb->transfer_buffer we need to allocate physical contiguous buffers for the entire transfer, which is pretty much guaranteed to fail with large transfers. Currently userspace works around this by breaking large transfers into multiple urbs. For large bulk transfers this leads to all kind of complications. This patch makes it possible for userspace to reliable submit large bulk transfers to scatter-gather capable host controllers in one go, by using a scatterlist to break the transfer up in managable chunks. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
There are a few (new) usbdevfs capabilities which an application cannot discover in any other way then checking the kernel version. There are 3 problems with this: 1) It is just not very pretty. 2) Given the tendency of enterprise distros to backport stuff it is not reliable. 3) As discussed in length on the mailinglist, USBDEVFS_URB_BULK_CONTINUATION does not work as it should when combined with USBDEVFS_URB_SHORT_NOT_OK (which is its intended use) on devices attached to an XHCI controller. So the availability of these features can be host controller dependent, making depending on them based on the kernel version not a good idea. This patch besides adding the new ioctl also adds flags for the following existing capabilities: USBDEVFS_CAP_ZERO_PACKET, available since 2.6.31 USBDEVFS_CAP_BULK_CONTINUATION, available since 2.6.32, except for XHCI USBDEVFS_CAP_NO_PACKET_SIZE_LIM, available since 3.3 Note that this patch only does not advertise the USBDEVFS_URB_BULK_CONTINUATION cap for XHCI controllers, bulk transfers with this flag set will still be accepted when submitted to XHCI controllers. Returning -EINVAL for them would break existing apps, and in most cases the troublesome scenario wrt USBDEVFS_URB_SHORT_NOT_OK urbs on XHCI controllers will never get hit, so this would break working use cases. The disadvantage of not returning -EINVAL is that cases were it is causing real trouble may go undetected / the cause of the trouble may be unclear, but this is the best we can do. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 01 7月, 2012 1 次提交
-
-
由 Randy Dunlap 提交于
Fix kernel-doc warning. This struct member was removed in commit 87568264 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 6月, 2012 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 6月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
Add task management support, wind up in abort and device reset error handlers. Cancel all in-flight urbs in bus reset handler. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 6月, 2012 4 次提交
-
-
由 Kishon Vijay Abraham I 提交于
The atomic notifier from twl4030/twl6030 to notifiy VBUS and ID events, is replaced by a direct call to omap musb blue. Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Kishon Vijay Abraham I 提交于
Used devres API's to associate the phy with a device so that on driver detach, release function is invoked on the devres data(usb_phy) and devres data(usb_phy) is released. Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Kishon Vijay Abraham I 提交于
Add a linked list for keeping multiple PHY instances with different types so that we can have separate USB2 and USB3 PHYs on one single board. _get_phy_ has been changed so that the controller gets the transceiver by type. _remove_phy_ has been added to let the phy be removed from the phy list. Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Kishon Vijay Abraham I 提交于
_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is replaced with usb_add_phy to make it similar to other usb standard function names like usb_add_hcd. Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 21 6月, 2012 3 次提交
-
-
由 Ozan Çağlayan 提交于
Guard vga_switcheroo.h against multiple inclusion. Signed-off-by: NOzan Çağlayan <ozancag@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Viresh Kumar 提交于
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: NViresh Kumar <viresh.linux@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pravin B Shelar 提交于
On arches that do not support this_cpu_cmpxchg_double() slab_lock is used to do atomic cmpxchg() on double word which contains page->_count. The page count can be changed from get_page() or put_page() without taking slab_lock. That corrupts page counter. Fix it by moving page->_count out of cmpxchg_double data. So that slub does no change it while updating slub meta-data in struct page. [akpm@linux-foundation.org: use standard comment layout, tweak comment text] Reported-by: NAmey Bhide <abhide@nicira.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 6月, 2012 2 次提交
-
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay@vrfy.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Reported-by: NFengguang Wu <wfg@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
On some systems, struct usb_device_id doesn't align properly due to the recent changes in it. So pad out the driver_info field to align on a boundry that systems can handle it. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 6月, 2012 2 次提交
-
-
由 Steven Rostedt 提交于
Commit 5963e317 ("ftrace/x86: Do not change stacks in DEBUG when calling lockdep") prevented lockdep calls from the int3 breakpoint handler from reseting the stack if a function that was called was in the process of being converted for tracing and had a breakpoint on it. The idea is, before calling the lockdep code, do a load_idt() to the special IDT that kept the breakpoint stack from reseting. This worked well as a quick fix for this kernel release, until a certain config caused a lockup in the function tracer start up tests. Investigating it, I found that the load_idt that was used to prevent the int3 from changing stacks was itself being traced! Even though the config had CONFIG_OPTIMIZE_INLINING disabled, and all 'inline' tags were set to always inline, there were still cases that it did not inline! This was caused by CONFIG_PARAVIRT_GUEST, where it would add a pointer to the native_load_idt() which made that function to be traced. Commit 45959ee7 ("ftrace: Do not function trace inlined functions") only touched the 'inline' tags when CONFIG_OPMITIZE_INLINING was enabled. PARAVIRT_GUEST shows that this was not enough and we need to also mark always_inline with notrace as well. Reported-by: NFengguang Wu <wfg@linux.intel.com> Tested-by: NFengguang Wu <wfg@linux.intel.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Trond Myklebust 提交于
Currently there is a 'chicken and egg' issue when the DS is also the mounted MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client is not called to dereference the MDS usage of a deviceid which holds a reference to the DS nfs_client. The result is the umount program returns, but the nfs_client is not freed, and the cl_session hearbeat continues. The MDS (and all other nfs mounts) lose their last nfs_client reference in nfs_free_server when the last nfs_server (fsid) is umounted. The file layout DS lose their last nfs_client reference in destroy_ds when the last deviceid referencing the data server is put and destroy_ds is called. This is triggered by a call to nfs4_deviceid_purge_client which removes references to a pNFS deviceid used by an MDS mount. The fix is to track how many pnfs enabled filesystems are mounted from this server, and then to purge the device id cache once that count reaches zero. Reported-by: NJorge Mora <Jorge.Mora@netapp.com> Reported-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 6月, 2012 4 次提交
-
-
由 Randy Dunlap 提交于
Fix warnings on some architectures/configs (not on x86): include/linux/vga_switcheroo.h:28:30: warning: 'struct pci_dev' declared inside parameter list [enabled by default] include/linux/vga_switcheroo.h:28:30: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Takashi Iwai <tiwai@suse.de> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Hugh Dickins 提交于
Minchan Kim reports that when a system has many swap areas, and tmpfs swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read back the page cannot locate it, and the read fails with -ENOMEM. Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry( swp_entry_to_pte()) technique for determining maximum usable swap offset, without stopping to realize that that actually depends upon the pte swap encoding shifting swap offset to the higher bits and truncating it there. Whereas our radix_tree swap encoding leaves offset in the lower bits: it's swap "type" (that is, index of swap area) that was truncated. Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header(). This does not reduce the usable size of a swap area any further, it leaves it as claimed when making the original commit: no change from 3.0 on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB per swapfile on i386 with PAE. It's not a change I would have risked five years ago, but with x86_64 supported for ten years, I believe it's appropriate now. Hmm, and what if some architecture implements its swap pte with offset encoded below type? That would equally break the maximum usable swap offset check. Happily, they all follow the same tradition of encoding offset above type, but I'll prepare a check on that for next. Reported-and-Reviewed-and-Tested-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NHugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org [3.1, 3.2, 3.3, 3.4] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
Orphaning skb in dev_hard_start_xmit() makes bonding behavior unfriendly for applications sending big UDP bursts : Once packets pass the bonding device and come to real device, they might hit a full qdisc and be dropped. Without orphaning, the sender is automatically throttled because sk->sk_wmemalloc reaches sk->sk_sndbuf (assuming sk_sndbuf is not too big) We could try to defer the orphaning adding another test in dev_hard_start_xmit(), but all this seems of little gain, now that BQL tends to make packets more likely to be parked in Qdisc queues instead of NIC TX ring, in cases where performance matters. Reverts commits : fc6055a5 net: Introduce skb_orphan_try() 87fd308c net: skb_tx_hash() fix relative to skb_orphan_try() and removes SKBTX_DRV_NEEDS_SK_REF flag Reported-and-bisected-by: NJean-Michel Hautbois <jhautbois@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NOliver Hartkopp <socketcan@hartkopp.net> Acked-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kay Sievers 提交于
Provide an iterator to receive the log buffer content, and convert all kmsg_dump() users to it. The structured data in the kmsg buffer now contains binary data, which should no longer be copied verbatim to the kmsg_dump() users. The iterator should provide reliable access to the buffer data, and also supports proper log line-aware chunking of data while iterating. Signed-off-by: NKay Sievers <kay@vrfy.org> Tested-by: NTony Luck <tony.luck@intel.com> Reported-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Tested-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 6月, 2012 6 次提交
-
-
由 Anton Vorontsov 提交于
A handy function that we will use outside of ram_core soon. But so far just factor it out and start using it in post_init(). Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Anton Vorontsov 提交于
Without the update, we'll only see the new dmesg buffer after the reboot, but previously we could see it right away. Making an oops visible in pstore filesystem before reboot is a somewhat dubious feature, but removing it wasn't an intentional change, so let's restore it. For this we have to make persistent_ram_save_old() safe for calling multiple times, and also extern it. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
Some composite USB devices provide multiple interfaces with different functions, all using "vendor-specific" for class/subclass/protocol. Another OS use interface numbers to match the driver and interface. It seems these devices are designed with that in mind - using static interface numbers for the different functions. This adds support for matching against the bInterfaceNumber, allowing such devices to be supported without having to resort to testing against interface number whitelists and/or blacklists in the probe. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b6128 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NDâniel Fraga <fragabr@gmail.com> Tested-by: NAndrey Rahmatullin <wrar@wrar.name> Tested-by: NSteven Rostedt <rostedt@goodmis.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Richard Zhao 提交于
- to decrease redundant since both ehci_hcd and ohci_hcd have the same variable - it helps access phy in usb core code - phy is more meaningful than transceiver Signed-off-by: NRichard Zhao <richard.zhao@freescale.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kuninori Morimoto 提交于
renesas_usbhs DMAEngine uses D0FIFO/D1FIFO, but the data transfer direction should be fixed for keeping consistency. This patch explain about it on renesas_usbhs.h Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 6月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
Yuck. The VIDIOC_(TRY_)DECODER_CMD ioctls already had ioctl numbers 96 and 97, and after merging the timings API I forgot to continue numbering from 98. So now we have two ioctls with number 96 and two with 97. With the new table-driver ioctl handling in v4l2-ioctl.c it is essential that each ioctl has its own unique number, so let's fix this quickly for 3.5. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 6月, 2012 2 次提交
-
-
由 Qiao Zhou 提交于
pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is defined under arch-pxa architecture, and drivers under mach-mmp can't find it. so just use ssp->type to replace that API. Signed-off-by: NQiao Zhou <zhouqiao@marvell.com> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Qiao Zhou 提交于
add pxa910-ssp into ssp_id_table, and fix pxa-ssp compiling issue under mach-mmp architect. Signed-off-by: NQiao Zhou <zhouqiao@marvell.com> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 6月, 2012 1 次提交
-
-
由 Paul Pluzhnikov 提交于
I originally sent this patch to <trivial@kernel.org>, but Jiri Kosina did not feel that this is fully appropriate for the trivial tree. Using linux/tcp.h from C++ results in: cat t.cc #include <linux/tcp.h> int main() { } g++ -c t.cc In file included from t.cc:1: /usr/include/linux/tcp.h:72: error: '__u32 __fswab32(__u32)' cannot appear in a constant-expression /usr/include/linux/tcp.h:72: error: a function call cannot appear in a constant-expression ... Attached trivial patch fixes this problem. Tested: - the t.cc above compiles with g++ and - the following program generates the same output before/after the patch: #include <linux/tcp.h> #include <stdio.h> int main () { #define P(a) printf("%s: %08x\n", #a, (int)a) P(TCP_FLAG_CWR); P(TCP_FLAG_ECE); P(TCP_FLAG_URG); P(TCP_FLAG_ACK); P(TCP_FLAG_PSH); P(TCP_FLAG_RST); P(TCP_FLAG_SYN); P(TCP_FLAG_FIN); P(TCP_RESERVED_BITS); P(TCP_DATA_OFFSET); #undef P return 0; } Signed-off-by: NPaul Pluzhnikov <ppluzhnikov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2012 5 次提交
-
-
由 Takashi Iwai 提交于
Fix a typo that is built only when CONFIG_VGA_SWITCHEROO=n. Signed-off-by: NTakashi Iwai <tiwai@suse.de> -
由 Takashi Iwai 提交于
Add vga_switcheroo_get_client_state() to get the current state of the client. This is necessary to determine the proper initial state of audio clients in HD-audio driver. Acked-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rusty Russell 提交于
Commit 026cee00 "params: <level>_initcall-like kernel parameters" set old-style module parameters to level 0. And we call those level 0 calls where we used to, early in start_kernel(). We also loop through the initcall levels and call the levelled module_params before the corresponding initcall. Unfortunately level 0 is early_init(), so we call the standard module_param calls twice. (Turns out most things don't care, but at least ubi.mtd does). Change the level to -1 for standard module_param calls. Reported-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
-
由 Cyrill Gorcunov 提交于
Zero is written at clear_tid_address when the process exits. This functionality is used by pthread_join(). We already have sys_set_tid_address() to change this address for the current task but there is no way to obtain it from user space. Without the ability to find this address and dump it we can't restore pthread'ed apps which call pthread_join() once they have been restored. This patch introduces the PR_GET_TID_ADDRESS prctl option which allows the current process to obtain own clear_tid_address. This feature is available iif CONFIG_CHECKPOINT_RESTORE is set. [akpm@linux-foundation.org: fix prctl numbering] Signed-off-by: NAndrew Vagin <avagin@openvz.org> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Pedro Alves <palves@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
A fix for commit b32dfe37 ("c/r: prctl: add ability to set new mm_struct::exe_file"). After removing mm->num_exe_file_vmas kernel keeps mm->exe_file until final mmput(), it never becomes NULL while task is alive. We can check for other mapped files in mm instead of checking mm->num_exe_file_vmas, and mark mm with flag MMF_EXE_FILE_CHANGED in order to forbid second changing of mm->exe_file. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Kees Cook <keescook@chromium.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-