Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.

Clean this up by creating a separate attr->type field.

Also clean up the various similarly complex user-space bits
all around counter attribute management.

The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).

(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If perf top is executed with a zero value for the refresh rate,
we get a division by zero exception while computing samples_per_sec.

Also a zero refresh rate is not possible, neither do we want to
accept negative values.

[ Impact: fix division by zero in perf top ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244223061-5399-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A number of places said 'events' while they should say 'samples'.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Support frequency-based profiling and make it the default.

(Also add a Hz printout in perf top.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf top is refreshed every delay_secs the thread runs in such
loop:

while (sleep(delay_secs)) {
	print_sym_table();
}

At the end of print_sym_table(), poll is used without sleep delay
to check if we have something from stdin.

It means that this check is done only every delay_secs, which can
be higher that 2 secs if the user defined a custom refresh rate.

We can drop sleep() here and directly use poll to wait between
refresh periods, so that the reaction after the user stops perf top
after typing "Enter" is immediate and doesn't suffer from the
delay_secs latency.

Nb: poll doesn't add any overhead that can parasite perf top measures
since it sleeps the entire timeout here.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244141284-7507-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use fork events to clone comm and map data and remove everything
munmap related
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add Git's color printing library to util/color.[ch].

Add it to perf report, with a trivial example to print high-overhead
entries in red, low-overhead entries in green.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also, add a suggestion to 'perf report', if the default sort order is
used.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On idle systems 'perf top' comes up empty by default, because the event
count filter is set to 100.

Reduce it to 5 instead.

Also add an option to limit the number of functions displayed.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

GCC 4.1.2 produces:

 util/parse-options.c: In function ‘get_value’:
 util/parse-options.c:36: warning: ‘arg’ may be used uninitialized in this function

 builtin-top.c: In function ‘display_thread’:
 builtin-top.c:178: warning: ‘printed’ may be used uninitialized in this function

Annotate them away by initializing these variables to 0.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

kerneltop has been replaced with perf top - so fix up a few
remaining references to it in display text and error messages.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The perf commands had different ways of describing themselves,
introduce a coherent command-file-header format taken from the
Git project.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Everything is nmi these days, remove the userspace bits so that
the kernel can drop the interface.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf_counter tools: Add locking to perf top

We need to protect the active_symbols list as two threads change it:
the main thread adding entries to the head and the display thread
decaying entries from any place in the list.

Also related: take a snapshot of syme->count[0] before using it to
calculate the weight and to show the same number used in this calc when
displaying the symbol usage.
Reported-by: NMike Galbraith <efault@gmx.de>
Tested-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529200307.GR4747@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now both perf top and report use the same routines.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090528175541.GG4747@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Tighten up our C code requirements:

 - disallow warnings
 - disallow declarations-mixed-with-statements
 - require proper prototypes
 - require C99 (with gcc extensions)

Fix up a ton of problems these measures unearth:

 - unused functions
 - needlessly global functions
 - missing prototypes
 - code mixed with declarations

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090526222155.GJ4424@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up copy/paste options parsing conversion error.

[ Impact: reactivate -d option ]
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

79202b removed IRQ/NMI mode selection, so remove it from
perf top as well.

[ Impact: cleanup ]
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove getopt usage and use Git's much more advanced and more compact
command option library.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove getopt usage and use Git's much more advanced and more compact
command option library.

Git's library (util/parse-options.[ch]) constructs help texts and
error messages automatically, and has a number of other convenience
features as well.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.

Before:

 top - 10:14:53 up  4:08, 17 users,  load average: 1.17, 1.53, 1.49
 Tasks: 273 total,   5 running, 268 sleeping,   0 stopped,   0 zombie
 Cpu(s):  6.9%us, 38.2%sy,  0.0%ni, 19.9%id,  0.0%wa,  0.0%hi, 35.0%si,  0.0%st

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  P COMMAND
 28504 root      20   0  1044  260  164 S   58  0.0   0:04.19 2 netserver
 28499 root      20   0  1040  412  316 R   51  0.0   0:04.15 0 netperf
 28500 root      20   0  1040  408  316 R   50  0.0   0:04.14 1 netperf
 28503 root      20   0  1044  260  164 S   50  0.0   0:04.01 1 netserver
 28501 root      20   0  1044  260  164 S   49  0.0   0:03.99 0 netserver
 28502 root      20   0  1040  412  316 S   43  0.0   0:03.96 2 netperf
 28468 root      20   0 1892m 325m  972 S   16 10.8   0:10.50 3 perf
 28467 root      20   0 1892m 325m  972 R    2 10.8   0:00.72 3 perf

After:

 top - 10:16:30 up  4:10, 17 users,  load average: 2.27, 1.88, 1.62
 Tasks: 273 total,   6 running, 267 sleeping,   0 stopped,   0 zombie
 Cpu(s):  2.5%us, 39.7%sy,  0.0%ni, 24.6%id,  0.0%wa,  0.0%hi, 33.3%si,  0.0%st

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  P COMMAND
 28590 root      20   0  1040  412  316 S   54  0.0   0:07.85 2 netperf
 28589 root      20   0  1044  260  164 R   54  0.0   0:07.84 0 netserver
 28588 root      20   0  1040  412  316 R   50  0.0   0:07.89 1 netperf
 28591 root      20   0  1044  256  164 S   50  0.0   0:07.82 1 netserver
 28587 root      20   0  1040  408  316 R   47  0.0   0:07.61 0 netperf
 28592 root      20   0  1044  260  164 R   47  0.0   0:07.85 2 netserver
 28378 root      20   0  8732 1300  860 R    2  0.0   0:01.81 3 top
 28577 root      20   0 1892m 165m  972 R    2  5.5   0:00.48 3 perf
 28578 root      20   0 1892m 165m  972 S    2  5.5   0:00.04 3 perf

[ Impact: optimization ]
Signed-off-by: NMike Galbraith <efault@gmx.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

c6eb13 increased stack usage such that perf-top now croaks on startup.

Take event_array and mmap_array off the stack to prevent segfault on boxen
with smallish ulimit -s setting.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

recent userspace (F11) seems to already include the
linux/unistd.h bits which means we cannot include the version
in the kernel sources due to the header guards being the same.

Ensure we include the kernel version first.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.739756497@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide perf top -F as alternative to -c.

[ Impact: new 'perf top' feature ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090515132018.707922166@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There is a buffer overwrite problem in builtin-top.c line 526, When I
tried to use ./perf top command, it was giving memory corruption
problem.

[ Impact: fix 'perf top' crash ]

LKML-Reference: <3fee128b0905092313x608e65e0l7b1116d86914114f@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

No change, move of duplicated stuff only.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

The documentation about the perf-top build was outdated after
perfstat has been implemented. This updates it.

[ Impact: update documentation ]
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1241002046-8832-30-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Mike Galbraith reported:

> marge:..Documentation/perf_counter # make
>     CC builtin-stat.o
> In file included from builtin-stat.c:71:
> /usr/include/ctype.h:102: error: expected expression before ‘]’ token

Remove the ctype.h include.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up the top level directory a bit by moving all the helper libraries
to util/*.[ch].
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Lets use the Git framework of built-in commands.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

First very raw version at having a central 'perf' command and
a list of subcommands:

  perf top
  perf stat
  perf record
  perf report
  ...

This is done by picking up Git's collection of utility functions,
and hacking them to build fine in this new environment.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update kerneltop to use PERF_EVENT_MISC_OVERFLOW
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090408130408.947197470@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

```---------------------------------------------------------------------------
 KernelTop:   90551 irqs/sec  kernel:15.0% [NMI, 100000 CPU cycles],  (all, 4 CPUs)
```

---------------------------------------------------------------------------

             events    pcnt         RIP          kernel function
  ______     ______   _____   ________________   _______________

           16871.00 - 19.1% - ffffffff80328e20 : clear_page_c
            8810.00 -  9.9% - ffffffff8048ce80 : page_fault
            4746.00 -  5.4% - ffffffff8048cae2 : _spin_lock
            4428.00 -  5.0% - ffffffff80328e70 : copy_page_c
            3340.00 -  3.8% - ffffffff80329090 : copy_user_generic_string!
            2679.00 -  3.0% - ffffffff8028a16b : get_page_from_freelist
            2254.00 -  2.5% - ffffffff80296f19 : unmap_vmas
            2082.00 -  2.4% - ffffffff80297e19 : handle_mm_fault
            1754.00 -  2.0% - ffffffff80288dc8 : __rmqueue_smallest
            1553.00 -  1.8% - ffffffff8048ca58 : _spin_lock_irqsave
            1400.00 -  1.6% - ffffffff8028cdc8 : release_pages
            1337.00 -  1.5% - ffffffff80285400 : find_get_page
            1335.00 -  1.5% - ffffffff80225a23 : do_page_fault
            1299.00 -  1.5% - ffffffff802ba8e7 : __d_lookup
            1174.00 -  1.3% - ffffffff802b38f3 : __link_path_walk
            1155.00 -  1.3% - ffffffff802843e1 : perf_swcounter_ctx_event!
            1137.00 -  1.3% - ffffffff8028d118 : ____pagevec_lru_add
             963.00 -  1.1% - ffffffff802a670b : kmem_cache_alloc
             885.00 -  1.0% - ffffffff8024bc61 : __wake_up_bit

Display per function percentage along with event count.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update to reflect the new record_type ABI changes.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.407283141@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Decouple kerneltop display from event acquisition by introducing
a separate data acquisition thread. This fixes annnoying kerneltop
display refresh jitter and missed events.

Also add a -r <prio> option, to switch the data acquisition thread
to real-time priority.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>