"User" addresses are shown in /sys/devices/pci.../.../resource and
/proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F
files.  On sparc, these are PCI bus addresses, i.e., raw BAR values.

Previously pci_resource_to_user() computed the user address by
subtracting either pbm->io_space.start or pbm->mem_space.start from the
resource start.

We've already told the PCI core about those offsets here:

  pci_scan_one_pbm()
    pci_add_resource_offset(&resources, &pbm->io_space, pbm->io_space.start);
    pci_add_resource_offset(&resources, &pbm->mem_space, pbm->mem_space.start);
    pci_add_resource_offset(&resources, &pbm->mem64_space, pbm->mem_space.start);

so pcibios_resource_to_bus() knows how to do that translation.

No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>

The function pcibios_add_device() added by commit d0c31e02
("sparc/PCI: Fix for panic while enabling SR-IOV") initializes
the dev_archdata by doing a memcpy from the PF. This has the
problem that it erroneously copies the OF device without
explicitly refcounting it.

As David Miller pointed out: "Generally speaking we don't
really support hot-plug for OF probed devices, but if we did
all of the device tree pointers have to be refcounted properly."

To fix this error, and also avoid code duplication, this patch
creates a new helper function, pci_init_dev_archdata(), that
initializes the fields in dev_archdata, and can be invoked
by callers after they have taken the needed refcounts
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: NBabu Moger <babu.moger@oracle.com>
Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We noticed this panic while enabling SR-IOV in sparc.

mlx4_core: Mellanox ConnectX core driver v2.2-1 (Jan  1 2015)
mlx4_core: Initializing 0007:01:00.0
mlx4_core 0007:01:00.0: Enabling SR-IOV with 5 VFs
mlx4_core: Initializing 0007:01:00.1
Unable to handle kernel NULL pointer dereference
insmod(10010): Oops [#1]
CPU: 391 PID: 10010 Comm: insmod Not tainted
		4.1.12-32.el6uek.kdump2.sparc64 #1
TPC: <dma_supported+0x20/0x80>
I7: <__mlx4_init_one+0x324/0x500 [mlx4_core]>
Call Trace:
 [00000000104c5ea4] __mlx4_init_one+0x324/0x500 [mlx4_core]
 [00000000104c613c] mlx4_init_one+0xbc/0x120 [mlx4_core]
 [0000000000725f14] local_pci_probe+0x34/0xa0
 [0000000000726028] pci_call_probe+0xa8/0xe0
 [0000000000726310] pci_device_probe+0x50/0x80
 [000000000079f700] really_probe+0x140/0x420
 [000000000079fa24] driver_probe_device+0x44/0xa0
 [000000000079fb5c] __device_attach+0x3c/0x60
 [000000000079d85c] bus_for_each_drv+0x5c/0xa0
 [000000000079f588] device_attach+0x88/0xc0
 [000000000071acd0] pci_bus_add_device+0x30/0x80
 [0000000000736090] virtfn_add.clone.1+0x210/0x360
 [00000000007364a4] sriov_enable+0x2c4/0x520
 [000000000073672c] pci_enable_sriov+0x2c/0x40
 [00000000104c2d58] mlx4_enable_sriov+0xf8/0x180 [mlx4_core]
 [00000000104c49ac] mlx4_load_one+0x42c/0xd40 [mlx4_core]
Disabling lock debugging due to kernel taint
Caller[00000000104c5ea4]: __mlx4_init_one+0x324/0x500 [mlx4_core]
Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core]
Caller[0000000000725f14]: local_pci_probe+0x34/0xa0
Caller[0000000000726028]: pci_call_probe+0xa8/0xe0
Caller[0000000000726310]: pci_device_probe+0x50/0x80
Caller[000000000079f700]: really_probe+0x140/0x420
Caller[000000000079fa24]: driver_probe_device+0x44/0xa0
Caller[000000000079fb5c]: __device_attach+0x3c/0x60
Caller[000000000079d85c]: bus_for_each_drv+0x5c/0xa0
Caller[000000000079f588]: device_attach+0x88/0xc0
Caller[000000000071acd0]: pci_bus_add_device+0x30/0x80
Caller[0000000000736090]: virtfn_add.clone.1+0x210/0x360
Caller[00000000007364a4]: sriov_enable+0x2c4/0x520
Caller[000000000073672c]: pci_enable_sriov+0x2c/0x40
Caller[00000000104c2d58]: mlx4_enable_sriov+0xf8/0x180 [mlx4_core]
Caller[00000000104c49ac]: mlx4_load_one+0x42c/0xd40 [mlx4_core]
Caller[00000000104c5f90]: __mlx4_init_one+0x410/0x500 [mlx4_core]
Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core]
Caller[0000000000725f14]: local_pci_probe+0x34/0xa0
Caller[0000000000726028]: pci_call_probe+0xa8/0xe0
Caller[0000000000726310]: pci_device_probe+0x50/0x80
Caller[000000000079f700]: really_probe+0x140/0x420
Caller[000000000079fa24]: driver_probe_device+0x44/0xa0
Caller[000000000079fb08]: __driver_attach+0x88/0xa0
Caller[000000000079d90c]: bus_for_each_dev+0x6c/0xa0
Caller[000000000079f29c]: driver_attach+0x1c/0x40
Caller[000000000079e35c]: bus_add_driver+0x17c/0x220
Caller[00000000007a02d4]: driver_register+0x74/0x120
Caller[00000000007263fc]: __pci_register_driver+0x3c/0x60
Caller[00000000104f62bc]: mlx4_init+0x60/0xcc [mlx4_core]
Kernel panic - not syncing: Fatal exception
Press Stop-A (L1-A) to return to the boot prom
---[ end Kernel panic - not syncing: Fatal exception

Details:
Here is the call sequence
virtfn_add->__mlx4_init_one->dma_set_mask->dma_supported

The panic happened at line 760(file arch/sparc/kernel/iommu.c)

758 int dma_supported(struct device *dev, u64 device_mask)
759 {
760         struct iommu *iommu = dev->archdata.iommu;
761         u64 dma_addr_mask = iommu->dma_addr_mask;
762
763         if (device_mask >= (1UL << 32UL))
764                 return 0;
765
766         if ((device_mask & dma_addr_mask) == dma_addr_mask)
767                 return 1;
768
769 #ifdef CONFIG_PCI
770         if (dev_is_pci(dev))
771		return pci64_dma_supported(to_pci_dev(dev), device_mask);
772 #endif
773
774         return 0;
775 }
776 EXPORT_SYMBOL(dma_supported);

Same panic happened with Intel ixgbe driver also.

SR-IOV code looks for arch specific data while enabling
VFs. When VF device is added, driver probe function makes set
of calls to initialize the pci device. Because the VF device is
added different way than the normal PF device(which happens via
of_create_pci_dev for sparc), some of the arch specific initialization
does not happen for VF device.  That causes panic when archdata is
accessed.

To fix this, I have used already defined weak function
pcibios_setup_device to copy archdata from PF to VF.
Also verified the fix.
Signed-off-by: NBabu Moger <babu.moger@oracle.com>
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NEthan Zhao <ethan.zhao@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David reported that a T5-8 sparc system failed to boot with:

  pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00
  pci_bus 0000:00: root bus resource [io  0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff])
  pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff])
  pci 0000:00:01.0: can't claim BAR 15 [mem 0x100000000-0x4afffffff pref]: no compatible bridge window

Note that we don't know about a host bridge aperture that contains
BAR 15.  OF does report a MEM64 aperture, but before this patch,
pci_determine_mem_io_space() ignored it.

Add support for host bridge apertures with 64-bit PCI addresses.  Also
set IORESOURCE_MEM_64 for PCI device and bridge resources in PCI 64-bit
memory space.

Sparc doesn't actually print the device and bridge resources, but after
this patch, we should have the equivalent of this:

  pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00
  pci_bus 0000:00: root bus resource [io  0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff])
  pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff])
  pci_bus 0000:00: root bus resource [mem 0x800100000000-0x8007ffffffff] (bus address [0x100000000-0x7ffffffff])
  pci 0000:00:01.0:   bridge window [mem 0x800100000000-0x8004afffffff 64bit pref]

[bhelgaas: changelog, URL to David's report]
Fixes: d63e2e1f ("sparc/PCI: Clip bridge windows to fit in upstream windows")
Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.comReported-by: NDavid Ahern <david.ahern@oracle.com>
Tested-by: NDavid Ahern <david.ahern@oracle.com>
Tested-by: NKhalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Quoting Arnd:
    I was thinking the opposite approach and basically removing all uses
    of IORESOURCE_CACHEABLE from the kernel. There are only a handful of
    them.and we can probably replace them all with hardcoded
    ioremap_cached() calls in the cases they are actually useful.

All existing usages of IORESOURCE_CACHEABLE call ioremap() instead of
ioremap_nocache() if the resource is cacheable, however ioremap() is
uncached by default. Clearly none of the existing usages care about the
cacheability. Particularly devm_ioremap_resource() never worked as
advertised since it always fell back to plain ioremap().

Clean this up as the new direction we want is to convert
ioremap_<type>() usages to memremap(..., flags).
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Previously, pci_setup_device() and similar functions searched the
pci_bus->slots list without any locking.  It was possible for another
thread to update the list while we searched it.

Add pci_dev_assign_slot() to search the list while holding pci_slot_mutex.

[bhelgaas: changelog, fold in CONFIG_SYSFS fix]
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Use helper functions to access fields in struct msi_desc, so we could
easily refine struct msi_desc later.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Link: http://lkml.kernel.org/r/1436428847-8886-8-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Add PCI slot numbers within sysfs for PCIe hardware.  Larger
PCIe systems with nested PCI bridges and slots further
down on these bridges were not being populated within sysfs.
This will add ACPI style PCI slot numbers for these systems
since the OF 'slot-names' information is not available on
all PCIe platforms.
Signed-off-by: NEric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: NBob Picco <bob.picco@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit d63e2e1f.

David Ahern reported that d63e2e1f breaks booting on an 8-socket T5
sparc system.  He also verified that the system boots with d63e2e1f
reverted.  Yinghai has some fixes, but they need a little more polishing
than we can do before v4.0.

Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com	# report
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org # patches
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.19+

Pci_claim_bus_resources() should be called before pci_bus_add_devices(), or
driver may failed to load, because the resources had not claimed.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Every PCI-PCI bridge window should fit inside an upstream bridge window
because orphaned address space is unreachable from the primary side of the
upstream bridge.  If we inherit invalid bridge windows that overlap an
upstream window from firmware, clip them to fit and update the bridge
accordingly.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491Reported-by: NMarek Kordik <kordikmarek@gmail.com>
Fixes: 5b285415 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Yijing Wang <wangyijing@huawei.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: sparclinux@vger.kernel.org

Perform a pci_claim_resource() on all valid resources discovered
during the OF device tree scan.

Based almost entirely upon the PCI OF bus probing code which does
the same thing there.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems that when a PCI Express bridge is not in use and has no devices
behind it, the ranges property is bogus.  Specifically the size property
is of the form [0xffffffff:...], and if you add this size to the resource
start address the 64-bit calculation will overflow.

Just check specifically for this size value signature and skip them.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dump the various aspects of the PCI bridge probed at boot time, most
importantly the bridge number ranges, and the ranges property.

This helps diagnose PCI resource issues and other problems by giving
ofpci_debug=1 on the boot command line.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use pci_is_bridge() to simplify code.  No functional change.

Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires: 1c86438c PCI: Add new pci_is_bridge() interface
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:
pci.c:886:5: warning: symbol 'pci64_dma_supported' was not declared. Should it be static?

Add proper prototype in kernel.h and delete local prototype in iommu.c
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pci.o is built for SPARC64_PCI -- which is bool, and hence
this code is either present or absent.  It will never be modular,
so using module_init as an alias for __initcall can be somewhat
misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups.  As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These interfaces:

  pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region)

took a pci_dev, but they really depend only on the pci_bus.  And we want to
use them in resource allocation paths where we have the bus but not a
device, so this patch converts them to take the pci_bus instead of the
pci_dev:

  pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region)

In fact, with standard PCI-PCI bridges, they only depend on the host
bridge, because that's the only place address translation occurs, but
we aren't going that far yet.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The SIMBA APB Bridges lacks the 'ranges' of-property describing the
PCI I/O and memory areas located beneath the bridge. Faking this
information has been performed by reading range registers in the
APB bridge, and calculating the corresponding areas.

In commit 01f94c4a
("Fix sabre pci controllers with new probing scheme.") a bug was
introduced into this calculation, causing the PCI memory areas
to be calculated incorrectly: The shift size was set to be
identical for I/O and MEM ranges, which is incorrect.

This patch set the shift size of the MEM range back to the
value used before 01f94c4a.
Signed-off-by: NKjetil Oftedal <oftedal@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

io_remap_pfn_range() does all we need
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Use the new pci_alloc_dev(bus) to replace the existing using of
alloc_pci_dev(void).

[bhelgaas: drop pci_bus ref later in pci_release_dev()]
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

Previously we initialized dev->current_state to 4 (PCI_D3cold), but I think
we wanted PCI_UNKNOWN (5) here based on the comment and the fact that the
generic version of this code, pci_setup_device(), uses PCI_UNKNOWN.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>

__devinit, __devexit annotations are nops - so drop them.
Likewise for __devexit_p.

Adjusted alignment of arguments when needed.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:

 | effect                 | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump      | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock           | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP

This patch removes reserved_vm counter from mm_struct.  Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.

Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.

remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.

[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most architectures implement this in exactly the same way. Instead of
having each architecture duplicate this function, provide a single
implementation in the core and make it a weak symbol so that it can be
overridden on architectures where it is required.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The generic code to read P2P bridge windows is functionally equivalent
to the sparc-specific pci_cfg_fake_ranges(), so use the generic code.

The "if (!res->start) res->start = ..." removed from the I/O window code
here was an artifact of the Intel 1K window support from 9d265124 and
is no longer necessary (it probably was just cloned from x86 and was never
useful on sparc).
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The PCI core provides a generic pcibios_setup() routine.  Drop this
architecture-specific version in favor of that.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add the host bridge bus number aperture to the resource list.
Like the MMIO and I/O port apertures, this is used when assigning
resources to hot-added devices or in the case of conflicts.

[bhelgaas: changelog, fix "pci_last_busn" typo]
Acked-by: N"David S. Miller" <davem@davemloft.net>
CC: sparclinux@vger.kernel.org
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Normal PCI enumeration via PCI config space uses __pci_read_base(), where
the PCI core applies any bus-to-resource offset.  But sparc sometimes
reads PCI config space itself, and sometimes it gets addresses from the
device tree.

In ac1edcc5, I converted sparc to use the PCI core bus-to-resource
conversion, but I missed these sparc-specific paths.  I don't have a way
to test it, but I think sparc is broken between that commit and this one.

This patch replaces the sparc-specific pci_resource_adjust() with the
generic pcibios_bus_to_resource() in the following paths:

    pci_cfg_fake_ranges()       (addresses read from PCI config)
    apb_fake_ranges()           (addresses computed based on PCI config)
    of_scan_pci_bridge()        (addresses from OF "ranges" property)

N.B.: Resources of non-P2P bridge devices are set in pci_parse_of_addrs()
and, as far as I can see, never converted to CPU addresses.  I do not
understand why these would be treated differently than bridge windows.

CC: "David S. Miller" <davem@davemloft.net>
CC: sparclinux@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

N.B. Leon apparently never uses initial BAR values, so it didn't matter
that we never fixed up the I/O resources from bus address to CPU addresses.

Other sparc uses pci_of_scan_bus(), which sets device resources directly
to CPU addresses, not bus addresses, so it didn't need pcibios_fixup_bus()
either.  But by telling the core about the offsets, we can nuke
pcibios_resource_to_bus().

CC: "David S. Miller" <davem@davemloft.net>
CC: sparclinux@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Convert from pci_create_bus() to pci_create_root_bus().  This way the root
bus resources are correct immediately.  This patch doesn't fix a problem
because sparc fixed the resources before scanning the bus, but it makes
sparc more consistent with other architectures.

v2: fix build error (from sfr)
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch converts SPARC's architecture-specific
'pcibios_set_master()' routine to a non-inlined function.  This will
allow follow on patches to create a generic 'pcibios_set_master()'
function using the '__weak' attribute which can be used by all
architectures as a default which, if necessary, can then be over-
ridden by architecture-specific code.

Converting 'pci_bios_set_master()' to a non-inlined function will
allow SPARC's 'pcibios_set_master()' implementation to remain
architecture-specific after the generic version is introduced and
thus, not change current behavior.

No functional change.
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Many of the core sparc kernel files are not modules, but just
including module.h for exporting symbols.  Now these files can
use the lighter footprint export.h for this role.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Currently no type of alignment is specified for PCI expansion roms while 
parsing the openfirmware tree. This causes calls to pci_map_rom() to fail.
IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in 
pci/probe.c, and has been verified to work with various cards on a ultra 10.
Signed-off-By: NKjetil Oftedal <oftedal@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

All archs do more or less the same thing now, move it into
a single generic place.

I chose pci.h rather than of_pci.h to avoid having to change
all call-sites to include the later.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>

powerpc has two different ways of matching PCI devices to their
corresponding OF node (if any) for historical reasons. The ppc64 one
does a scan looking for matching bus/dev/fn, while the ppc32 one does a
scan looking only for matching dev/fn on each level in order to be
agnostic to busses being renumbered (which Linux does on some
platforms).

This removes both and instead moves the matching code to the PCI core
itself. It's the most logical place to do it: when a pci_dev is created,
we know the parent and thus can do a single level scan for the matching
device_node (if any).

The benefit is that all archs now get the matching for free. There's one
hook the arch might want to provide to match a PHB bus to its device
node. A default weak implementation is provided that looks for the
parent device device node, but it's not entirely reliable on powerpc for
various reasons so powerpc provides its own.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Scripted with coccinelle.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: sparclinux@vger.kernel.org