- 05 9月, 2007 1 次提交
-
-
由 Ingo Molnar 提交于
fix niced_granularity(). This resulted in under-scheduling for CPU-bound negative nice level tasks (and this in turn caused higher than necessary latencies in nice-0 tasks). Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 8月, 2007 6 次提交
-
-
由 Ingo Molnar 提交于
cleanup: we have the 'se' and 'curr' entity-pointers already, no need to use p->se and current->se. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMike Galbraith <efault@gmx.de>
-
由 Ingo Molnar 提交于
small schedstat fix: the cfs_rq->wait_runtime 'sum of all runtimes' statistics counters missed newly forked tasks and thus had a constant negative skew. Fix this. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMike Galbraith <efault@gmx.de>
-
由 Ingo Molnar 提交于
Peter Zijlstra noticed the following bug in SCHED_FEAT_SKIP_INITIAL (which is disabled by default at the moment): it relies on se.wait_start_fair being 0 while update_stats_wait_end() did not recognize a 0 value, so instead of 'skipping' the initial interval we gave the new child a maximum boost of +runtime-limit ... (No impact on the default kernel, but nice to fix for completeness.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMike Galbraith <efault@gmx.de>
-
由 Ting Yang 提交于
update the fair-clock before using it for the key value. [ mingo@elte.hu: small cleanups. ] Signed-off-by: NTing Yang <tingy@cs.umass.edu> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NMike Galbraith <efault@gmx.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
由 Ingo Molnar 提交于
de-HZ-ification of the granularity defaults unearthed a pre-existing property of CFS: while it correctly converges to the granularity goal, it does not prevent run-time fluctuations in the range of [-gran ... 0 ... +gran]. With the increase of the granularity due to the removal of HZ dependencies, this becomes visible in chew-max output (with 5 tasks running): out: 28 . 27. 32 | flu: 0 . 0 | ran: 9 . 13 | per: 37 . 40 out: 27 . 27. 32 | flu: 0 . 0 | ran: 17 . 13 | per: 44 . 40 out: 27 . 27. 32 | flu: 0 . 0 | ran: 9 . 13 | per: 36 . 40 out: 29 . 27. 32 | flu: 2 . 0 | ran: 17 . 13 | per: 46 . 40 out: 28 . 27. 32 | flu: 0 . 0 | ran: 9 . 13 | per: 37 . 40 out: 29 . 27. 32 | flu: 0 . 0 | ran: 18 . 13 | per: 47 . 40 out: 28 . 27. 32 | flu: 0 . 0 | ran: 9 . 13 | per: 37 . 40 average slice is the ideal 13 msecs and the period is picture-perfect 40 msecs. But the 'ran' field fluctuates around 13.33 msecs and there's no mechanism in CFS to keep that from happening: it's a perfectly valid solution that CFS finds. to fix this we add a granularity/preemption rule that knows about the "target latency", which makes tasks that run longer than the ideal latency run a bit less. The simplest approach is to simply decrease the preemption granularity when a task overruns its ideal latency. For this we have to track how much the task executed since its last preemption. ( this adds a new field to task_struct, but we can eliminate that overhead in 2.6.24 by putting all the scheduler timestamps into an anonymous union. ) with this change in place, chew-max output is fluctuation-less all around: out: 28 . 27. 39 | flu: 0 . 2 | ran: 13 . 13 | per: 41 . 40 out: 28 . 27. 39 | flu: 0 . 2 | ran: 13 . 13 | per: 41 . 40 out: 28 . 27. 39 | flu: 0 . 2 | ran: 13 . 13 | per: 41 . 40 out: 28 . 27. 39 | flu: 0 . 2 | ran: 13 . 13 | per: 41 . 40 out: 28 . 27. 39 | flu: 0 . 1 | ran: 13 . 13 | per: 41 . 40 out: 28 . 27. 39 | flu: 0 . 1 | ran: 13 . 13 | per: 41 . 40 this patch has no impact on any fastpath or on any globally observable scheduling property. (unless you have sharp enough eyes to see millisecond-level ruckles in glxgears smoothness :-) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMike Galbraith <efault@gmx.de>
-
由 Mike Galbraith 提交于
There is an Amarok song switch time increase (regression) under hefty load. What is happening is that sleeper_bonus is never consumed, and only rarely goes below runtime_limit, so for the most part, Amarok isn't getting any bonus at all. We're keeping sleeper_bonus right at runtime_limit (sched_latency == sched_runtime_limit == 40ms) forever, ie we don't consume if we're lower that that, and don't add if we're above it. One Amarok thread waking (or anybody else) will push us past the threshold, so the next thread waking gets nada, but will reap pain from the previous thread waking until we drop back to runtime_limit. It looks to me like under load, some random task gets a bonus, and everybody else pays, whether deserving or not. This diff fixed the regression for me at any load rate. Signed-off-by: NMike Galbraith <efault@gmx.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
- 26 8月, 2007 2 次提交
-
-
由 Ingo Molnar 提交于
due to adaptive granularity scheduling the role of sched_granularity has changed to "minimum granularity", so rename the variable (and the tunable) accordingly. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
由 Peter Zijlstra 提交于
Instead of specifying the preemption granularity, specify the wanted latency. By fixing the granlarity to a constany the wakeup latency it a function of the number of running tasks on the rq. Invert this relation. sysctl_sched_granularity becomes a minimum for the dynamic granularity computed from the new sysctl_sched_latency. Then use this latency to do more intelligent granularity decisions: if there are fewer tasks running then we can schedule coarser. This helps performance while still always keeping the latency target. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 8月, 2007 6 次提交
-
-
由 Ingo Molnar 提交于
fix task startup penalty miscalculation: sysctl_sched_granularity is unsigned int and wait_runtime is long so we first have to convert it to long before turning it negative ... Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
current code: delta = calc_delta_mine(delta_exec, curr->load.weight, lw); delta = min((u64)delta, cfs_rq->sleeper_bonus); Notice that this calc_delta_mine() line is exactly delta_mine, which gives: delta = min((u64)delta_mine, cfs_rq->sleeper_bonus); Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
current code: delta = min(cfs_rq->sleeper_bonus, (u64)delta_exec); delta = calc_delta_mine(delta, curr->load.weight, lw); delta = min((u64)delta, cfs_rq->sleeper_bonus); drop the first min(), because we clip against sleeper_bonus in the 3rd line again. That gives: delta = calc_delta_mine(delta_exec, curr->load.weight, lw); delta = min((u64)delta, cfs_rq->sleeper_bonus); Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
make the bonus balance more consistent: do not hand out a bonus if there's too much in flight already, and only deduct as much from a runner as it has the capacity. This makes the bonus engine a zero-sum game (as intended). this also simplifies the code: text data bss dec hex filename 34770 2998 24 37792 93a0 sched.o.before 34749 2998 24 37771 938b sched.o.after and it also avoids overscheduling in sleep-happy workloads like hackbench.c. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove HZ dependency from the granularity default. Use 10 msec for the base granularity, 1 msec for wakeup granularity and 25 msec for batch wakeup granularity. (These defaults are close to the values that the default HZ=250 setting got previously, and thus it's the most common setting.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bruce Ashfield 提交于
when I built with CONFIG_FAIR_GROUP_SCHED=y, I need the following change to make things right. [ From: mingo@elte.hu ] this config option is not upstream-configurable right now but lets fix this for completeness. Signed-off-by: NBruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 8月, 2007 1 次提交
-
-
由 Ingo Molnar 提交于
Peter Ziljstra noticed that the sleeper bonus deduction code was not properly rate-limited: a task that scheduled more frequently would get a disproportionately large deduction. So limit the deduction to delta_exec. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 8月, 2007 1 次提交
-
-
由 Ingo Molnar 提交于
while there's no in-tree way to turn group scheduling at the moment, fix a typo in it nevertheless. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 8月, 2007 23 次提交
-
-
由 Ingo Molnar 提交于
refine the granularity of negative nice level tasks: let them reschedule more often to offset the effect of them consuming their wait_runtime proportionately slower. (This makes nice-0 task scheduling smoother in the presence of negatively reniced tasks.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
the key has to be rescaled to /weight even if it has a positive value. (this change only affects the scheduling of reniced tasks) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
clean up set_curr_task_fair(). ( identity transformation that causes no change in functionality. ) text data bss dec hex filename 39170 3750 36 42956 a7cc sched.o.before 39170 3750 36 42956 a7cc sched.o.after Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove __update_rq_clock() call from entity_tick(). no change in functionality because scheduler_tick() already calls __update_rq_clock(). Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
final step: remove all (now superfluous) 'u64 now' variables. ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from ->task_new(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from ->put_prev_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from ->pick_next_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from ->dequeue_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from ->enqueue_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from put_prev_entity(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from pick_next_entity(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from set_next_entity(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from dequeue_entity(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from enqueue_entity(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from enqueue_sleeper(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from __enqueue_sleeper(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from update_stats_curr_end(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from update_stats_dequeue(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from update_stats_curr_start(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from update_stats_wait_end(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from __update_stats_wait_end(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
remove the 'u64 now' parameter from update_stats_enqueue(). ( identity transformation that causes no change in functionality. ) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-