- 15 11月, 2011 1 次提交
-
-
由 Axel Lin 提交于
In devfreq_remove_device, calling _remove_devfreq will also free devfreq. Don't dereference devfreq->governor->no_central_polling after _remove_devfreq. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NMyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 10 11月, 2011 3 次提交
-
-
由 MyungJoo Ham 提交于
Added <linux/module.h> and <linux/stat.h> to avoid a compiler error because linux/irq.h no longer includes linux/module.h after Linux 3.2. Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Guennadi Liakhovetski 提交于
Make dev_pm_qos_add_request() use WARN() in a better way and do not hardcode the function's name into the message (use __func__ instead). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Refrain from running clk_disable() on clocks that have not been enabled. A typical case when this can happen is during Suspend-to-RAM for devices that have no driver associated with them. In such case the clock may be in default ACQUIRED state. Without this patch the sh7372 Mackerel board crashes in __clk_disable() during Suspend-to-RAM with: "Trying to disable clock 0xdeadbeef with 0 usecount" This happens for the CEU device which is added during boot. The test case has no CEU driver included in the kernel configuration. Needed for v3.2-rc1. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 09 11月, 2011 5 次提交
-
-
由 Thomas Meyer 提交于
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Linus Torvalds 提交于
The Kconfig loop detection goes crazy without this. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com> Acked-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Alan Cox 提交于
Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 11月, 2011 16 次提交
-
-
由 Axel Lin 提交于
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
-
由 Dan Williams 提交于
All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
由 NeilBrown 提交于
When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0 in 2.6.29. Reported-by: NManish Katiyar <mkatiyar@gmail.com> Tested-by: NManish Katiyar <mkatiyar@gmail.com> Acked-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
由 Paul Gortmaker 提交于
These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Axel Lin 提交于
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Jonas Gorski 提交于
module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 david decotigny 提交于
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: NDavid Decotigny <david.decotigny@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mandeep Baines 提交于
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: NDavid Decotigny <david.decotigny@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 david decotigny 提交于
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: NDavid Decotigny <david.decotigny@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Ditto 提交于
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: NDavid Decotigny <david.decotigny@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 david decotigny 提交于
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/Signed-off-by: NDavid Decotigny <david.decotigny@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Rothwell 提交于
since it uses the module facilities. Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
For the files which are not themselves modular, we can change them to include only the smaller export.h since all they are doing is looking for EXPORT_SYMBOL. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491ec SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rose, Gregory V 提交于
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2011 15 次提交
-
-
由 Jakob Bornecrantz 提交于
Enough to get cursors working under Wayland. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Make it possible to use explicit placement (although not hooked up with a user-space interface yet) and relax the single framebuffer limit to only apply to implicit placement. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
It isn't used for anything. Replace with an active bool. Also make a couple of functions return void instead of int since their return value wasn't checked anyway. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJakbo Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Remove unused member. No need to pin / unpin fb. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Linus Torvalds 提交于
This reverts commit 36116245. It causes an infinite loop when booting Linux under Xen, as so: [ 2.382984] console [hvc0] enabled [ 2.382984] console [hvc0] enabled [ 2.382984] console [hvc0] enabled ... as reported by Konrad Rzeszutek Wilk. And Rusty reports the same for lguest. He goes on to say: "This is not a concurrency problem: the issue seems to be that calling register_console() twice on the same struct console is a bad idea." and Greg says he'll fix it up properly at some point later. Revert for now. Reported-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-by: NRusty Russell <rusty@ozlabs.org> Requested-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Miche Baker-Harvey <miche@google.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Neuling 提交于
Fix building following build error: drivers/tty/hvc/hvc_opal.c:244:12: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: NMichael Neuling <mikey@neuling.org> [ New file from powerpc tree not following the new rules from the module.h split, both of which were merged today. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This removes the use of the special "macbookair_fn_keys" keyboard translation table for the MacBookAir4,x models (ie the 2011 refresh). They use the standard apple_fn_keys[] translation. Apparently only the old MacBook Air's need a different translation table. This mirrors the change that commit da617c7c ("HID: consolidate MacbookAir 4,1 mappings") did for the WELLSPRING6A ones, but does it for the WELLSPRING6 model used on the MacBookAir4,2. Reported-and-tested-by: NDirk Hohndel <hohndel@infradead.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joshua V Dillon <jvdillon@gmail.com> Cc: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Deepthi Dharwar 提交于
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Deepthi Dharwar 提交于
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-