Set up mountpoint when hitting a referral on moved error by getting
fs_locations.
Signed-off-by: NManoj Naik <manoj@almaden.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use component4-style formats for decoding list of servers and pathnames in
fs_locations.
Signed-off-by: NManoj Naik <manoj@almaden.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4 allows for the fact that filesystems may be replicated across
several servers or that they may be migrated to a backup server in case of
failure of the primary server.
fs_locations is an NFSv4 operation for retrieving information about the
location of migrated and/or replicated filesystems.

Based on an initial implementation by Jiaying Zhang <jiayingz@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make automounted partitions expire using the mark_mounts_for_expiry()
function. The timeout is controlled via a sysctl.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This should enable us to detect if we are crossing a mountpoint in the
case where the server is exporting "nohide" mounts.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow filesystems to decide to perform pre-umount processing whether or not
MNT_FORCE is set.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow a submount to be marked as being 'shrinkable' by means of the
vfsmount->mnt_flags, and then add a function 'shrink_submounts()' which
attempts to recursively unmount these submounts.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace all module uses with the new vfs_kern_mount() interface, and fix up
simple_pin_fs().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

do_kern_mount() does not allow the kernel to use private mount interfaces
without exposing the same interfaces to userland. The problem is that the
filesystem is referenced by name, thus meaning that it and its mount
interface must be registered in the global filesystem list.

vfs_kern_mount() passes the struct file_system_type as an explicit
parameter in order to overcome this limitation.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In the case of a call to truncate_inode_pages(), we should really try to
cancel any pending writes on the page.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Separate out the function of revalidating the inode metadata, and
revalidating the mapping. The former may be called by lookup(),
and only really needs to check that permissions, ctime, etc haven't changed
whereas the latter needs only done when we want to read data from the page
cache, and may need to sync and then invalidate the mapping.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Whenever the directory changes, we want to make sure that we always
invalidate its page cache. Fix up update_changeattr() and
nfs_mark_for_revalidate() so that they do so.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up use of page_array, and fix an off-by-one error noticed by Tom
Talpey which causes kmalloc calls in cases where using the page_array
is sufficient.

Test plan:
Normal client functional testing with r/wsize=32768.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Ralf Baechle <ralf@linux-mips.org>

<linux/mempolicy.h> uses struct mm_struct and relies on a definition or
declaration somehow magically being dragged in which may result in a
build:

[...]
  CC      mm/mempolicy.o
In file included from mm/mempolicy.c:69:
include/linux/mempolicy.h:150: warning: ‘struct mm_struct’ declared inside parameter list
include/linux/mempolicy.h:150: warning: its scope is only this definition or declaration, which is probably not what you want
include/linux/mempolicy.h:175: warning: ‘struct mm_struct’ declared inside parameter list
mm/mempolicy.c:622: error: conflicting types for ‘do_migrate_pages’
include/linux/mempolicy.h:175: error: previous declaration of ‘do_migrate_pages’ was here
mm/mempolicy.c:1661: error: conflicting types for ‘mpol_rebind_mm’
include/linux/mempolicy.h:150: error: previous declaration of ‘mpol_rebind_mm’ was here
make[1]: *** [mm/mempolicy.o] Error 1
make: *** [mm] Error 2
[ralf@denk linux-ip35]$

Including <linux/sched.h> is a step into direction of include hell so
fixed by adding a forward declaration of struct mm_struct instead.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Andrew Morton <akpm@osdl.org>

drivers/rtc/rtc-m48t86.c: In function `m48t86_rtc_read_time':
drivers/rtc/rtc-m48t86.c:51: error: structure has no member named `ia64_mv'
drivers/rtc/rtc-m48t86.c:55: error: structure has no member named `ia64_mv'
drivers/rtc/rtc-m48t86.c:56: error: structure has no member named `ia64_mv'
drivers/rtc/rtc-m48t86.c:57: error: structure has no member named `ia64_mv'
drivers/rtc/rtc-m48t86.c:58: error: structure has no member named `ia64_mv'
drivers/rtc/rtc-m48t86.c:60: error: structure has no member named `ia64_mv'

readb() and writeb() are macros on ia64.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Ralf Baechle <ralf@linux-mips.org>

<linux/mmzone.h> uses PAGE_SIZE, PAGE_SHIFT from <asm/page.h> without
including that header itself.  For some sparsemem configurations this may
result in build errors like:

  CC      init/initramfs.o
In file included from include/linux/gfp.h:4,
                 from include/linux/slab.h:15,
                 from include/linux/percpu.h:4,
                 from include/linux/rcupdate.h:41,
                 from include/linux/dcache.h:10,
                 from include/linux/fs.h:226,
                 from init/initramfs.c:2:
include/linux/mmzone.h:498:22: warning: "PAGE_SHIFT" is not defined
In file included from include/linux/gfp.h:4,
                 from include/linux/slab.h:15,
                 from include/linux/percpu.h:4,
                 from include/linux/rcupdate.h:41,
                 from include/linux/dcache.h:10,
                 from include/linux/fs.h:226,
                 from init/initramfs.c:2:
include/linux/mmzone.h:526: error: `PAGE_SIZE' undeclared here (not in a function)
include/linux/mmzone.h: In function `__pfn_to_section':
include/linux/mmzone.h:573: error: `PAGE_SHIFT' undeclared (first use in this function)
include/linux/mmzone.h:573: error: (Each undeclared identifier is reported only once
include/linux/mmzone.h:573: error: for each function it appears in.)
include/linux/mmzone.h: In function `pfn_valid':
include/linux/mmzone.h:578: error: `PAGE_SHIFT' undeclared (first use in this function)
make[1]: *** [init/initramfs.o] Error 1
make: *** [init] Error 2
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Seems-reasonable-to: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Andrew Morton <akpm@osdl.org>

Revert commit ff4da2e2.

It broke APM suspend, probably because APM doesn't switch back to a VT
when suspending.

Tracked down by Matt Mackall <mpm@selenic.com>

Rafael sayeth:
  "It only fixed the theoretical issue that a quick-handed user could
   switch to X after processes have been frozen and before the devices
   are suspended.

   With the current userland suspend tools it shouldn't be necessary."

Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the numbered SW_* entries from the input system and assign names
to the existing users.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These flags are needed by userspace - move them outside __KERNEL__

(Pointed out by dwmw2)

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch enables agpgart on a Via "PT880 Ultra" based motherboard
(Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of
0x0258 of the PT880.

The patched via-agp passes testgart.
Signed-off-by: NMagnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: NDave Jones <davej@redhat.com>

Andy added code to buddy allocator which does not require the zone's
endpoints to be aligned to MAX_ORDER.  An issue is that the buddy allocator
requires the node_mem_map's endpoints to be MAX_ORDER aligned.  Otherwise
__page_find_buddy could compute a buddy not in node_mem_map for partial
MAX_ORDER regions at zone's endpoints.  page_is_buddy will detect that
these pages at endpoints are not PG_buddy (they were zeroed out by bootmem
allocator and not part of zone).  Of course the negative here is we could
waste a little memory but the positive is eliminating all the old checks
for zone boundary conditions.

SPARSEMEM won't encounter this issue because of MAX_ORDER size constraint
when SPARSEMEM is configured.  ia64 VIRTUAL_MEM_MAP doesn't need the logic
either because the holes and endpoints are handled differently.  This
leaves checking alloc_remap and other arches which privately allocate for
node_mem_map.
Signed-off-by: NBob Picco <bob.picco@hp.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- remove the following global function that is both unused and
  unimplemented:
  - register_firmware()

- make the following needlessly global function static:
  - firmware_class_uevent()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This driver supports the SPI controller on the MPC83xx SoC devices from
Freescale.  Note, this driver supports only the simple shift register SPI
controller and not the descriptor based CPM or QUICCEngine SPI controller.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Pavel Pisa

There has been problems that for some paths that clock are not stopped
during new command programming and initiation. Result is issuing
of incorrect command to the card. Some other problems are cleaned too.
Noisy report of known ERRATUM #4 has been suppressed.
Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need to be able to have a "SPI bus 0" matching chip numbering; but
that number was wrongly used to flag dynamic allocation of a bus number.

This patch resolves that issue; now negative numbers trigger dynamic alloc.

It also updates the how-to-write-a-controller-driver overview to mention
this stuff.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add spi_device hook for LSB-first word encoding, and update all the
(in-tree) controller drivers to reject such devices.  Eventually,
some controller drivers will be updated to support lsb-first encodings
on the wire; no current drivers need this.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Renamed bitbang_transfer_setup to follow convention of other exported symbols
from spi-bitbang.  Exported spi_bitbang_setup_transfer to allow users of
spi-bitbang to use the function in their own setup_transfer.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes superfluous whitespace in the <linux/spi/spi.h> header.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some protocols (like one for some bitmap displays) require different clock
speed or word size settings for each transfer in an SPI message. This adds
those parameters to struct spi_transfer.  They are to be used when they are
nonzero; otherwise the defaults from spi_device are to be used.

The patch also adds a setup_transfer callback to spi_bitbang, uses it for
messages that use those overrides, and implements it so that the pure
bitbanging code can help resolve any questions about how it should work.
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

can_share_swap_page() is used to check if the page has the last reference.
This avoids allocating a new page for COW if it's the last page.

However, if CONFIG_SWAP is not set, can_share_swap_page() is defined as 0,
thus always causes a copy for the last COW page.  The below simple patch
fixes it.
Signed-off-by: NHua Zhong <hzhong@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

slab_is_available() indicates slab based allocators are available for use.
SPARSEMEM code needs to know this as it can be called at various times
during the boot process.
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Even since a previous patch:

Fix race between CONFIG_DEBUG_SLABALLOC and modules
Sun, 27 Jun 2004 17:55:19 +0000 (17:55 +0000)
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commit;h=92b3db26d31cf21b70e3c1eadc56c179506d8fbe

The function symbol_put_addr() will deadlock the kernel.

symbol_put_addr() would acquire modlist_lock, then while holding the lock call
two functions kernel_text_address() and module_text_address() which also try
to acquire the same lock.  This deadlocks the kernel of course.

This patch changes symbol_put_addr() to not acquire the modlist_lock, it
doesn't need it since it never looks at the module list directly.  Also, it
now uses core_kernel_text() instead of kernel_text_address().  The latter has
an additional check for addr inside a module, but we don't need to do that
since we call module_text_address() (the same function kernel_text_address
uses) ourselves.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Cc: Zwane Mwaikambo <zwane@fsmlabs.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With "Paul E. McKenney" <paulmck@us.ibm.com>

Introduce rcu_needs_cpu() interface.  This can be used to tell if there
will be a new rcu batch on a cpu soon by looking at the curlist pointer.
This can be used to avoid to enter a tickless idle state where the cpu
would miss that a new batch is ready when rcu_start_batch would be called
on a different cpu.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

V4L1 API is depreciated and should be removed soon from kernel. This patch
adds two new options, one to disable V4L1 drivers, and another to disable
V4L1 compat module. This way, it would be easy to check what still depends
on V4L1 stuff, allowing also to test if app works fine with V4L2 only support.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>