- 01 5月, 2015 4 次提交
-
-
由 Thomas Falcon 提交于
Enables receiving large packets from other LPARs. These packets have a -1 IP header checksum, so we must recalculate to have a valid checksum. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Add support for TSO. TSO is turned off by default and must be enabled and configured by the user. The driver version number is increased so that users can be sure that they are using ibmveth with TSO support. Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
This patch enables 64k rx buffer pools by default. If Cooperative Memory Overcommitment (CMO) is enabled, the number of 64k buffers is reduced to save memory. Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2015 1 次提交
-
-
由 Michael Ellerman 提交于
The recent commit to only register the EHEA memory hotplug hooks on adapter probe has a few problems. Firstly the reference counting is wrong for multiple adapters, in that the hooks are registered multiple times. Secondly the check in the tear down path is backward. Finally the error path doesn't decrement the count. The multiple registration of the hooks is the biggest problem, as it leads to oopses when the system is rebooted, and/or errors during memory hotplug, eg: $ ./mem-on-off-test.sh -r 2 ... ehea: memory is going offline ehea: LPAR memory changed - re-initializing driver ehea: re-initializing driver complete ehea: memory is going offline ehea: LPAR memory changed - re-initializing driver ehea: opcode=26c ret=fffffffffffffffc arg1=8000000003000003 arg2=0 arg3=700000060000d600 arg4=3fded0000 arg5=200 arg6=0 arg7=0 ehea: register_rpage_mr failed ehea: registering mr failed ehea: register MR failed - driver inoperable! ehea: memory is going offline Fixes: aa183323 ("ehea: Register memory hotplug, reboot and crash hooks on adapter probe") Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2015 1 次提交
-
-
由 David Gibson 提交于
AFAIK the PAPR document which defines the virtual device interface used by the ibmveth driver doesn't specify a specific maximum MTU. So, in the ibmveth driver, the maximum allowed MTU is determined by the maximum allocated buffer size of 64k (corresponding to one page in the common case) minus the per-buffer overhead IBMVETH_BUFF_OH (which has value 22 for 14 bytes of ethernet header, plus 8 bytes for an opaque handle). This suggests a maximum allowable MTU of 65514 bytes, but in fact the driver only permits a maximum MTU of 65513. This is because there is a < instead of an <= in ibmveth_change_mtu(), which only permits an MTU which is strictly smaller than the buffer size, rather than allowing the buffer to be completely filled. This patch fixes the buglet. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Acked-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2015 2 次提交
-
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2015 1 次提交
-
-
由 Kyle Moffett 提交于
These functions are only used from one place each. If the cacheable_* versions really are more efficient, then those changes should be migrated into the common code instead. NOTE: The old routines are just flat buggy on kernels that support hardware with different cacheline sizes. Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 3月, 2015 1 次提交
-
-
由 Yongbae Park 提交于
The interrupt is enabled before napi_complete(). A network timeout occurs if the interrupt handler is called before napi_complete(). Fix the bug by enabling the interrupt after napi_complete(). Signed-off-by: NYongbae Park <yongbae2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2015 1 次提交
-
-
由 Thomas Falcon 提交于
Add a function that will enable changing the MAC address of an ibmveth interface while it is still running. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 2月, 2015 1 次提交
-
-
由 Anton Blanchard 提交于
ehea creates memory hotplug, reboot and crash hooks even if there are no adapters in the box. Just create them when we probe our first adapter. [cascardo: use ehea_register_memory_hooks return code] Signed-off-by: NAnton Blanchard <anton@samba.org> Tested-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2015 1 次提交
-
-
由 Markus Elfring 提交于
The of_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2015 1 次提交
-
-
由 Jiri Pirko 提交于
The same macros are used for rx as well. So rename it. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2014 1 次提交
-
-
由 Markus Elfring 提交于
The of_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2014 1 次提交
-
-
由 Wolfram Sang 提交于
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 26 8月, 2014 1 次提交
-
-
由 Vlad Yasevich 提交于
The driver claims that it can do TSO and IP checksums on vlan devices and also allows user to control vlan acceleration offloading. This makes it possible to push traffic to this driver that has TSO or partial checksums set, but also have a non-accelearted vlan header. In this case, the driver will fail to correctly identify such traffic and will not correctly perform segmentation and checksum calculation. Fix this by using vlan_get_protocol() helper instead of assuming skb->protocol always has this information. CC: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
Hidden away in the last 8 bytes of the buffer_list page is a solitary statistic. It needs to be byte swapped or else ethtool -S will produce numbers that terrify the user. Since we do this in multiple places, create a helper function with a comment explaining what is going on. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2014 1 次提交
-
-
由 Andreas Ruprecht 提交于
In the Makefile, ehea_phyp.o is included twice in the list of object files compile into ehea.o. This change removes one instance. Signed-off-by: NAndreas Ruprecht <rupran@einserver.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2014 1 次提交
-
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2014 3 次提交
-
-
由 Ivan Mikhaylov 提交于
Aggreagation of version 1-2 because of version 1 can hit PLB errors too. If it's not set so we missing events for PLB bits and driver can't process those interrupts. Signed-off-by: NIvan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Mikhaylov 提交于
In chips of emac/rgmii b'000' for 0/1 channel isn't suitable which resulted in non working network interface in this mode. Signed-off-by: NIvan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himangi Saraogi 提交于
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Compile-Tested-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2014 1 次提交
-
-
由 Rickard Strandqvist 提交于
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2014 1 次提交
-
-
由 Wilfried Klaebe 提交于
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: NDave Miller <davem@davemloft.net> Signed-off-by: NWilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2014 2 次提交
-
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in ibmveth_start_xmit that can be called in hard irq and other contexts. In this code path the packet can have either been transmitted or dropped, dev_consume_skb_any was choosen because that preserves the existing semantics of the code, and a transmitted packet is more likely. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> -
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in functions that can be called in hard irq and other contexts. None of the locations was a packet drop so dev_kfree_skb_any is inappropriate. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 15 3月, 2014 1 次提交
-
-
由 Eric W. Biederman 提交于
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
The code to load a MAC address into a u64 for passing to the hypervisor via a register is broken on little endian. Create a helper function called ibmveth_encode_mac_addr which does the right thing in both big and little endian. We were storing the MAC address in a long in struct ibmveth_adapter. It's never used so remove it - we don't need another place in the driver where we create endian issues with MAC addresses. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2013 2 次提交
-
-
由 Alistair Popple 提交于
This patch updates the generic iommu backend code to use the it_page_shift field to determine the iommu page size instead of using hardcoded values. Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alistair Popple 提交于
The powerpc iommu uses a hardcoded page size of 4K. This patch changes the name of the IOMMU_PAGE_* macros to reflect the hardcoded values. A future patch will use the existing names to support dynamic page sizes. Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 07 12月, 2013 1 次提交
-
-
由 Jeff Kirsher 提交于
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Santosh Raspatur <santosh@chelsio.com> CC: Dimitris Michailidis <dm@chelsio.com> CC: Michael Chan <mchan@broadcom.com> CC: Santiago Leon <santil@linux.vnet.ibm.com> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Olof Johansson <olof@lixom.net> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Nicolas Pitre <nico@fluxnic.net> CC: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
Few network drivers really supports frag_list : virtual drivers. Some drivers wrongly advertise NETIF_F_FRAGLIST feature. If skb with a frag_list is given to them, packet on the wire will be corrupt. Remove this flag, as core networking stack will make sure to provide packets that can be sent without corruption. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2013 2 次提交
-
-
由 Alistair Popple 提交于
Calls to mal_enable_eob_irq perform a read-write-modify of a dcr to enable device irqs which is protected by a spin lock. However calls to mal_disable_eob_irq do not take the corresponding lock. This patch resolves the problem by ensuring that calls to mal_disable_eob_irq also take the lock. Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alistair Popple 提交于
This patch fixes a bug which would trigger the BUG_ON() at net/core/dev.c:4156. It was found that this was due to continuing processing in the current poll call even when the call to napi_reschedule failed, indicating the device was already on the polling list. This resulted in an extra call to napi_complete which triggered the BUG_ON(). This patch ensures that we only contine processing rotting packets in the current mal_poll call if we are not already on the polling list. Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2013 1 次提交
-
-
由 Rob Herring 提交于
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NGrant Likely <grant.likely@linaro.org>
-
- 03 10月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2013 1 次提交
-
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com>
-
- 17 9月, 2013 1 次提交
-
-
由 Olaf Hering 提交于
Use separate table for alias entries in the ehea module, otherwise the probe() function will operate on the separate ports instead of the lhea-"root" entry of the device-tree Addresses https://bugzilla.novell.com/show_bug.cgi?id=435215 [ Thadeu notes that: "... this issue might happen with the generation of initrd, when the scripts check for /sys/class/net/eth0/device/modalias, which links to the port device at /sys/devices/ibmebus/23c00400.lhea/port0/" ] Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NOlaf Hering <ohering@suse.com> Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-