* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
  and update Documentation/ide/ide.txt.

* Remove no longer needed ide_forced chipset type.

v2:
* is_chipset_set[] -> is_chipset_set in ide.c.

* Documentation/ide/ide.txt fix.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove CONFIG_BLK_DEV_HD hack from init_hwif_default()
  ("hda=noprobe hdb=noprobe" kernel parameters should be used
  instead if somebody wishes to use the old "hd" driver).

* Make CONFIG_BLK_DEV_HD_ONLY config option available also when
  IDE subsystem is used and update help entry.

* Remove no longer needed CONFIG_BLK_DEV_HD_IDE config option.

v2:
* Update documentation to suggest "hda=noprobe hdb=noprobe"
  instead of obsoleted "ide0=noprobe".

* Update Documentation/ide/ide.txt.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'struct class ide_port_class' ('ide_port' class) and a 'struct
  device *portdev' ('ide_port' class device) in ide_hwif_t.

* Register 'ide_port' class in ide_init() and unregister it in
  cleanup_module().

* Create ->portdev in ide_register_port () and unregister it in
  ide_unregister().

* Add "delete_devices" class device attribute for unregistering IDE devices
  on a port and "scan" one for probing+registering IDE devices on a port.

* Add ide_sysfs_register_port() helper for registering "delete_devices"
  and "scan" attributes with ->portdev.  Call it in ide_device_add_all().

* Document IDE warm-plug support in Documentation/ide/warm-plug-howto.txt.

v2:
* Convert patch from using 'struct class_device' to use 'struct device'.
  (thanks to Kay Sievers for doing it)
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

->busproc method is used by HDIO_SET_BUSSTATE ioctl but it has no chance
of working as intended (in 2.4.x days) because to issue an ioctl there
is a device node needed and:

- for BUSSTATE_TRISTATE+OFF it is too late (devices are already gone)

- for BUSSTATE_TRISTATE+ON it is too early (devices are not registered yet)

Just remove ->busproc method for now (it was only implemented by hpt366,
siimage and tc86c001 host drivers).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Rework PowerMac media-bay support in such way that instead of
un/registering the IDE interface we un/register IDE devices:

* Add ide_port_scan() helper for probing+registerering devices on a port.

* Rename ide_port_unregister_devices() to __ide_port_unregister_devices().

* Add ide_port_unregister_devices() helper for unregistering devices on a port.

* Add 'ide_hwif_t *cd_port' to 'struct media_bay_info', pass 'hwif' instead
  of hwif->index to media_bay_set_ide_infos() and use it to setup 'cd_port'.

* Use ide_port_unregister_devices() instead of ide_unregister()
  and ide_port_scan() instead of ide_register_hw() in media_bay_step().

* Unexport ide_register_hw() and make it static.

v2:
* Fix build by adding <linux/ide.h> include to <asm-powerpc/mediabay.h>.
  (Reported by Michael/Kamalesh/Andrew).

Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out devices init from ide_init_port_data() to
  ide_port_init_devices_data().

While at it:

* Add explicit clearing of IDE device structure.

There should be no functionality changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out code unregistering devices from ide_unregister() to
ide_port_unregister_devices().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use ide_find_port() instead of ide_deprecated_find_port() in bast-ide/
  palm_bk3710/ide-cs/delkin_cb host drivers and in ide_register_hw().

* Remove no longer needed ide_deprecated_find_port().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Instead of checking for '->io_ports[IDE_DATA_OFFSET] == 0' check for
  '->chipset == ide_unknown' when looking for an empty ide_hwifs[] slot.

* Do ide-pnp initialization after ide-generic when IDE is built-in
  (ide-pnp is the only user of ide_find_port() which needs such fixup).
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This option is obsolete and can be removed safely.

It allows us to remove the pci_get_device_reverse() function from the
PCI core.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted
(they are layering violation and should be dealt with in the same
 way as done by libata - device-mapper should be used instead).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted
(nowadays device-driver binding can be changed at runtime through sysfs
 and it can also be dealt with using per device driver parameters).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mark "ide0=ali14xx|cmd640_vlb|dtc2278|ht6560b|qd65xx|umc8672" kernel
parameters as obsoleted (per host driver replacements have been available
for a long time).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Relocating the index to come after finding the hwif pointer.
Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide.c:801:18: warning: symbol 'flags' shadows an earlier one
drivers/ide/ide.c:732:16: originally declared here

Also fix some whitespace damage while at it.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Skip probing port if "hdx=noprobe" parameter was used for both devices on it.

* Obsolete "idex=noprobe" parameter - it only works for ide_generic, cmd640
  and PCI hosts in Compatibility mode (on alpha/x86/ia64/m32r/mips/ppc32).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Identical comment is present in ide_hwif_release_regions() documentation.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- it is valid only if "Probe IDE PCI devices in the PCI bus order
  (DEPRECATED)" config option is used

- Greg needs to remove pci_get_device_reverse() for PCI core changes

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On Thursday 03 January 2008, Robert Hancock wrote:

[...]

> How about getting rid of this stupid thing in drivers/ide/ide.c:
> 
> #define       REVISION        "Revision: 7.00alpha2"
> 
> which is used in:
> 
> printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
> 
> It's been 7.00alpha2 for god knows how long, so clearly this version 
> number is not useful..

Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cris.c:
* Add cris_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]).

buddha.c:
* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().

falconide.c:
* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),
  also fix return value of falconide_init() while at it.

gayle.c:
* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().

macide.c:
* Add macide_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]).

q40ide.c:
* Fix q40_ide_setup_ports() comments.

ide.c:
* Remove no longer needed ide_setup_ports().

Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ->nice0 and ->nice2 ide_drive_t fields are always zero so remove them.

* IDE_NICE_0 and IDE_NICE_2 defines from <linux/hdreg.h> are no longer
  used by any kernel code so cover them with #ifndef/#endif __KERNEL__.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out code for finding ide_hwifs[] slot from ide_register_hw()
  to ide_deprecated_find_port().

* Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add()
  instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop
  which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot
  cannot be find).

This patch leaves us with only two ide_register_hw() users:
- drivers/macintosh/mediabay.c
- drivers/ide/ide.c
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'init_default' (flag for calling init_hwif_default()) and 'restore'
  (flag for calling ide_hwif_restore()) arguments to ide_unregister().

* Update ide_unregister() users to set 'init_default' and 'restore' flags.

* No need to set 'init_default' flag in ide_register_hw() if the setup done
  by init_hwif_default() is going to be overridden by ide_init_port_hw().

* No need to set 'init_default' and 'restore' flags in cleanup_module().

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_init_port_hw() call overrides setup done by init_hwif_default().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

We check earlier for hwif->present and call ide_unregister() if necessary
(after ide_unregister() hwif->present will be always cleared).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().

* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.

* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().

* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
  move it to ide-probe.c and call it in in ide_device_add_all() instead of
  ide_pci_setup_ports().

* Move ->mate setup to ide_device_add_all() from ide_port_init().

* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
  ->autotune currently.

* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
  (to not override setup done by ide_hwif_configure()).

* Add ETRAX host handling to ide_device_add_all().

* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.

* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
  setup to pmac_ide_setup_device().

* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
  ide_device_add() calls and then remove open-coded ports initialization.
Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On DTC2278 32-bit I/O has to be enabled for both devices on the port
so always enable it during init time and disallow further changes.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Release I/O resources after releasing DMA.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use the facts that:

* When ide_init() is called 'system_bus_speed' always equals zero.

* system_bus_clock() is never called before ide_init().

and:

* Move printk() from ide_system_bus_speed() to ide_init().

* Don't assign 'system_bus_speed' in ide_system_bus_speed().

* Don't call ide_system_bus_speed() in system_bus_clock().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The last years stuff and a trip down memory lane...
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Delete filenames/versions from comments.

I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s
to maintainers of the respective drivers.

While at it:

* Remove unused VERSION define from ide.c.

* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Keep pointer to struct device instead of struct pci_dev in ide_hwif_t.

While on it:
* Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce().

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Based on the previous work by Tejun Heo.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and
  set_pio_mode() (other callers were aleady over-riding rq->cmd_type).

* Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove broken disk byte-swapping support:
- it can cause a data corruption on SMP (or if using PREEMPT on UP)
- all data coming from disk are byte-swapped by taskfile_*_data() which
  results in incorrect identify data being reported by /proc/ide/ and IOCTLs
- "hdx=bswap/byteswap" kernel parameter has been broken on m68k host drivers
  (including Atari/Q40 ones) since 2.5.x days (because of 'hwif' zero-ing)
- byte-swapping is limited to PIO transfers (for working with TiVo disks on
  x86 machines using user-space solutions or dm-byteswap should result in
  much better performance because DMA can be used)

For previous discussions please see:

http://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html
http://lkml.org/lkml/2004/2/28/111

[ I have dm-byteswap device mapper target if somebody is interested
  (patch is for 2.6.4 though but I'll dust it off if needed). ]
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs().

* Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle,
  macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add().

  This removes dependency on ide_generic for these drivers so update
  ide/Kconfig accordingly.

v2:
* ide_arm build fix (s/ide_device_idx/ide_device_add/)
  (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem).

Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>