The regulator support in the l4f00242t03 is very non-idiomatic.  Rather
than requesting the regulators based on the device name and the supply
names used by the device the driver requires boards to pass system
specific supply names around through platform data.  The driver also
conditionally requests the regulators based on this platform data, adding
unneeded conditional code to the driver.

Fix this by removing the platform data and converting to the standard
idiom, also updating all in tree users of the driver.  As no datasheet
appears to be available for the LCD I'm guessing the names for the
supplies based on the existing users and I've no ability to do anything
more than compile test.

The use of regulator_set_voltage() in the driver is also problematic,
since fixed voltages are required the expectation would be that the
voltages would be fixed in the constraints set by the machines rather than
manually configured by the driver, but is less problematic.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NFabio Estevam <fabio.estevam@freescale.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch merges the build of imx3 and imx6.  The Kconfig symbol
ARCH_IMX_V6_V7 is introduced to replace ARCH_MX3 and ARCH_MX6.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It adds suspend/resume support for imx6q.
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It adds generic device tree based machine support for imx6q.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It adds smp and cpu hotplug support for imx6q.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It adds a number of core drivers support for imx6q, including clock,
General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
System Reset Controller (src).
Signed-off-by: NRanjani Vaidyanathan <ra5478@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It adds the core definitions and low-level debug uart support
for imx6q.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The pm-imx27.c references a number of things requiring the explicit
inclusion of mach/hardware.h.  Otherwise, when indirect inclusion
to mach/hardware.h gets cleaned up, we will see the following
compile error.

  CC      arch/arm/mach-imx/pm-imx27.o
arch/arm/mach-imx/pm-imx27.c: In function ‘mx27_suspend_enter’:
arch/arm/mach-imx/pm-imx27.c:22:3: error: implicit declaration of function ‘IOMEM’
arch/arm/mach-imx/pm-imx27.c:22:3: error: implicit declaration of function ‘IMX_IO_P2V’
arch/arm/mach-imx/pm-imx27.c: In function ‘mx27_pm_init’:
arch/arm/mach-imx/pm-imx27.c:42:2: error: implicit declaration of function ‘cpu_is_mx27’
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The helper function mx27_setup_weimcs() references IOMEM() and
IMX_IO_P2V() but without required header mach/hardware.h included
in mx27.h.  This will break the build of those mx27 file with no
direct inclusion of mach/hardware.h, or when indirect inclusion to
mach/hardware.h breaks.

For example, when the inclusion of mach/hardware.h gets removed from
mach/gpio.h, we will see the following compile error.

  CC      arch/arm/mach-imx/pm-imx27.o
In file included from arch/arm/mach-imx/pm-imx27.c:14:0:
arch/arm/plat-mxc/include/mach/mx27.h: In function ‘mx27_setup_weimcs’:
arch/arm/plat-mxc/include/mach/mx27.h:138:2: error: implicit declaration of function ‘IOMEM’
arch/arm/plat-mxc/include/mach/mx27.h:138:2: error: implicit declaration of function ‘IMX_IO_P2V’

This patch removes mx27_setup_weimcs() from mx27.h and makes it local
to mach-pcm038.c, which is the only user for this helper.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The mach-kzm_arm11_01.c references a number of things requiring the
explicit inclusion of mach/hardware.h.  Otherwise, when indirect
inclusion to mach/hardware.h gets cleaned up, we will see the following
compile error.

  CC      arch/arm/mach-imx/mach-kzm_arm11_01.o
arch/arm/mach-imx/mach-kzm_arm11_01.c:71:3: error: implicit declaration of function ‘IOMEM’
arch/arm/mach-imx/mach-kzm_arm11_01.c:71:3: error: implicit declaration of function ‘IMX_IO_P2V_MODULE’
arch/arm/mach-imx/mach-kzm_arm11_01.c:71:14: error: ‘MX31_CS4’ undeclared here (not in a function)
arch/arm/mach-imx/mach-kzm_arm11_01.c:71:14: error: ‘MX31_CS5’ undeclared here (not in a function)
arch/arm/mach-imx/mach-kzm_arm11_01.c:71:3: error: implicit declaration of function ‘IMX_IO_P2V’
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The helper function mx31_setup_weimcs() references IOMEM() and
IMX_IO_P2V() but without required header mach/hardware.h included
in mx31.h.  This will break the build of those mx31 based board file
with no direct inclusion of mach/hardware.h, or when indirect inclusion
to mach/hardware.h breaks.

For example, when the inclusion of mach/hardware.h gets removed from
mach/gpio.h, we will see the following compile error.

  CC      arch/arm/mach-imx/mach-pcm037_eet.o
In file included from arch/arm/mach-imx/devices-imx31.h:9:0,
                 from arch/arm/mach-imx/mach-pcm037_eet.c:20:
arch/arm/plat-mxc/include/mach/mx31.h: In function ‘mx31_setup_weimcs’:
arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IOMEM’
arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IMX_IO_P2V’

This patch removes mx31_setup_weimcs() from mx31.h and makes it local
to mach-qong.c, which is the only user for this helper.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Boards used to specify zreladdr in their Makefile.boot with
zreladdr-y := x, so conflicting zreladdrs were silently overwritten.
This patch changes this to zreladdr-y += x, so that we end
up with multiple words in zreladdr in such a case. We can
detect this later and complain if necessary.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds an ioremap hook imx_ioremap to be called in
__imx_ioremap().  Any soc that needs a customized ioremap other
than __arm_ioremap() can set up this hook in soc specific call.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds an idle hook imx_idle to be called in arch_idle().
Any soc that needs a customized idle implementation other than
cpu_do_idle() can set up this hook in soc specific call.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The mxc_init_l2x0() should really be an imx31/35 specific call.
The patch removes early_initcall from mxc_init_l2x0() and get imx31
and imx35 soc specific function calls mxc_init_l2x0(), so that it's
not necessarily to be called for all imx socs when we build single
image for multiple imx socs.

Thus the function can be renamed to imx3_init_l2x0() and put into
mm-imx3.c.  It also changes the return type from integer to void.
From what I see, the integer was picked just to satisfy early_initcall
prototype.

With the patch 'ARM: l2x0: add empty l2x0_of_init' applied, the code
compiles even without CONFIG_CACHE_L2X0 enabled.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Since mm-imx31.c now is shared between imx31 and imx35, the patch
renames mm-imx31.c to mm-imx3.c.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

As imx31 and imx35 have much in common at soc level, this patch merges
mm-imx35.c into mm-imx31.c, so that the common functions between imx31
and imx35 can be added in one file later.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Also, add handle_irq callbacks to machine descriptors.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch add poweroff support on mx31moboard platform.
A watchdog timeout is generated while enabling the watchdog
reset IO to trigger a PMIC poweroff.
Signed-off-by: NPhilippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Add watchdog support for mach-qong target.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Tested-by : Stefano Babic <sbabic@denx.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

mx31pdk target fails to build:

  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
arch/arm/mach-imx/built-in.o: In function `mx31_3ds_init':
mach-mx31_3ds.c:(.init.text+0x548): undefined reference to `imx_add_mxc_mmc'
mach-mx31_3ds.c:(.init.text+0x69c): undefined reference to `imx31_mxc_mmc_data'
make: *** [.tmp_vmlinux1] Error

Fix this by passsing IMX_HAVE_PLATFORM_MXC_MMC option.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

These are scheduled for removal and replaced by CONFIG_SOC_IMX*
macros where appropriate.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This can make the l2 cache work at early time which
will benefit the boot up time.

Tested on i.mx31pdk board, test result shows:

Before: arch_initcall(mxc_init_l2x0);

[    0.558755] console [ttymxc0] enabled

After: early_initcall(mxc_init_l2x0);

[    0.555716] console [ttymxc0] enabled
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

update to use generic function for displaying silicon revision
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Update to use generic function for displaying silicon revision

Tested on mx31pdk board as print the following information:
CPU identified as i.MX31, silicon rev 2.0
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Silicon revision is useful information to have during kernel boot.

Print the MX27 silicon revision.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Silicon revision is useful information to have during kernel boot.
Print the MX25 silicon revision.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Define functions for registering PATA on MX27/MX31/MX35/MX53.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Add PATA clock support for MX27/MX31/MX35/MX53.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

For this we need CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

I made some changes to the entry in the ARM Machine Registry after
submission which was the wrong thing to do.
This patch should help to fix this error.
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and replaces
all the uses of gpio_to_irq() in static initializers with
IMX_GPIO_TO_IRQ().
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h
before we start consolidating the individual platform implementations
of the gpio header files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Request for comment and commit.

From: T. Mehnert <t.mehnert@eckelmann.de>
Date: Mon, 4 Jul 2011 15:53:30 +0200
Subject: [PATCH] i.MX25 GPT clock fix: ensure correct the clock source

This patch ensures, that Linux will take the correct clock source (AHB_DIV)
for gpt in the ARM i.MX25 implementation. The currect code depends on the reset
defaults of the CCM_MCR register. So on some boards it could happen that the
UPLL is used for clock source, which results in faulty time behavior in Linux.
In this case all delays or sleeps will will be faktor 1.8 too long.
Signed-off-by: NTorsten Mehnert <t.mehnert@eckelmann.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

It might be not good to use software defined version to identify sdma
device type, when hardware does not define such version.  Instead,
soc name is stable enough to define the device type.

The patch uses platform_device_id rather than version number passed
by platform data to identify sdma device type/version.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>