Due to commit 88f718e3
"ARM: pxa: delete the custom GPIO header" some drivers fail
compilation, for example like this:

In file included from sound/soc/pxa/spitz.c:28:0:
sound/soc/pxa/spitz.c: In function ‘spitz_ext_control’:
arch/arm/mach-pxa/include/mach/spitz.h:111:30: error:
‘PXA_NR_BUILTIN_GPIO’ undeclared (first use in this function)
 #define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
(etc.)

This is caused by implicit inclusion of <mach/irqs.h> from
various board-specific headers under <mach/*> in the PXA
platform. So we take a sweep over these, and for every such
header that uses PXA_NR_BUILTIN_GPIO or PXA_GPIO_TO_IRQ()
we explicitly #include "irqs.h" so that we satisfy the
dependency in the board include file alone.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: NKevin Hilman <khilman@linaro.org>

After commit 88f718e3
"ARM: pxa: delete the custom GPIO header" a compilation
error was introduced in the PXA25x gadget driver.
An attempt to fix the problem was made in
commit b144e4ab
"usb: gadget: fix pxa25x compilation problems"
by explictly stating the driver needs the <mach/hardware.h>
header, which solved the compilation for a few boards,
such as the pxa255-idp and its defconfig.

However the Lubbock board has this special clause in
drivers/usb/gadget/pxa25x_udc.c:

This include file has an implicit dependency on
<mach/irqs.h> having been included before <mach/lubbock.h>
was included.

Before commit 88f718e3
"ARM: pxa: delete the custom GPIO header" this implicit
dependency for the pxa25x_udc compile on the Lubbock was
satisfied by <linux/gpio.h> implicitly including
<mach/gpio.h> which was in turn including <mach/irqs.h>,
apart from the earlier added <mach/hardware.h>.

Fix this by having the PXA25x <mach/lubbock.h> explicitly
include <mach/irqs.h>.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The PXA sub-architecture appears to have a custom <mach/gpio.h>
for no reason whatsoever. The file became completely empty
after Haojian removed the remaining content in
commit 157d2644
"ARM: pxa: change gpio to platform device".

That commit added these two lines:

However it seems like deleting the file has no effect
whatsoever on the kernel compilation.

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Move debug uart code from mach-pxa/mach-mmp to debug directory.
Since they are similar, merge them together.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: NEric Mico <eric.y.miao@gmail.com>

This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The Chip Select Configuration Register must be programmed to 0x2 in
order to achieve the correct behavior of the Static Memory Controller.

Without this patch devices wired to DFI and accessed through SMC cannot
be accessed after resume from S2.

Do not rely on the boot loader to program the CSMSADRCFG register by
programming it in the kernel smemc module.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: stable@vger.kernel.org
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

The #ifdefs around the leds-gpio device platform data are erroneous.  Currently
the device is not instantiated on the centro unless CONFIG_MACH_TREO680 is
defined.  This patch eliminates the #ifdefs, and uses the machine_is_* macros to
initialize the data based on which machine the code is running on and the
build-time configuration.  Unused data is optimized out by the build tools if
build configuration does not enable support for both machines.

Tested on my palm treo 680, and compile-tested for all three combinations of
treo680/centro build configurations.
Signed-off-by: NMike Dunn <mikedunn@newsguy.com>
Acked-by: NTomas Cech <sleep_walker@suse.cz>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

This patch gets the LCD working on my Palm Treo680 by adding some code that
manages the three gpios interfaced to the lcd on the Treo 680.  The precise role
of each gpio in the hardware architecture is not entirely clear to me; this
patch is the result of trial-and-error and observing how the PalmOS code
initializes the lcd.

The need for this patch is not evident when Linux is loaded from PalmOS, because
at that point the lcd-related gpios have already been configured.  But when
booting the kernel by other means, this patch is required unless the bootloader
has performed the necessary initialializations.
Signed-off-by: NMike Dunn <mikedunn@newsguy.com>
Acked-by: NTomas Cech <sleep_walker@suse.cz>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c,
all the arch_decomp_wdog() definition at platform level is unneeded.
Remmove it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NJason Cooper <jason@lakedaemon.net>

This patch fixes some code that implements a work-around to a hardware bug in
the ac97 controller on the pxa27x.  A bug in the controller's warm reset
functionality requires that the mfp used by the controller as the AC97_nRESET
line be temporarily reconfigured as a generic output gpio (AF0) and manually
held high for the duration of the warm reset cycle.  This is what was done in
the original code, but it was broken long ago by commit fb1bf8cd
    ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset())
which changed the mfp to a GPIO input instead of a high output.

The fix requires the ac97 controller to obtain the gpio via gpio_request_one(),
with arguments that configure the gpio as an output initially driven high.

Tested on a palm treo 680 machine.  Reportedly, this broken code only prevents a
warm reset on hardware that lacks a pull-up on the line, which appears to be the
case for me.
Signed-off-by: NMike Dunn <mikedunn@newsguy.com>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Move the PXA2xx/IXP4xx UDC header file into linux/platform_data as it
only contains a driver platform data structure.
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

PXA95x isn't widely used. And it adds the effort on supporting
multiple platform. So remove it.

The assumption is that nobody will miss this support. If you are
reading this text because you actually require pxa95x support on
a new kernel, we can work out a way to revert this patch or add
support to the mmp platform.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the pxa include directories
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Acked-by: NMarek Vasut <marex@denx.de>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NPaul Parsons <lost.distance@yahoo.com>
Acked-by: NVinod Koul <vinod.koul@linux.intel.com>
Acked-By: NStefan Schmidt <stefan@openezx.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Cc: Harald Welte <laforge@openezx.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Tomas Cech <sleep_walker@suse.cz>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: openezx-devel@lists.openezx.org

Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Make the OS timer registers have IOMEM like properities so they can
be passed to readl_relaxed/writel_relaxed() et.al. rather than being
straight volatile dereferences.  Add linux/io.h includes where
required.

linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c,
 arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c
 drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c
from Arnd.

This fixes these warnings:

arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init':
arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type
arch/arm/mach-pxa/time.c: In function 'pxa_timer_init':
arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds the Synaptics NavPoint touchpad to the hx4700 platform:
1. Change GPIO23_SSP1_SCLK value in hx4700_pin_config[] from an output
to an input, since the NavPoint is connected to SSP in SPI slave mode.
2. Add GPIO102_GPIO (NavPoint power) to hx4700_pin_config[].
3. Add navpoint platform_device to devices[].
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

The Micron MT9M111 camera chip needs its output enable to be
activated in order to work. The bootloader is not required to
activate it, so do it in machine code.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

The pcm990 baseboard for the pcm027 module used to setup a static
mapping for accessing the CPLD. It became illegal to call iotable_init
that late. The pcm027 support is broken since then. This patch
switches the cpld support to ioremap and removes all references to
previous static mappings.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Pins that have MFP_LPM_KEEP_OUTPUT set and are configured for output
must retain the output state in low power mode.
Currently, the pin direction configuration is overrided with values
in gpdr_lpm[] array and do not obey the MFP_LPM_KEEP_OUTPUT setting.

Fix the above bug and add some documentation to clarify the
MFP_LPM_KEEP_OUTPUT setting purpose.
Reported-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Tested-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

With commit c334bc15 (ARM: make mach/io.h include optional), PCMCIA was
broken. PCMCIA depends on __io() returning a valid i/o address, and most
ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This
needs a better fix with a fixed i/o address mapping, but for now we just
restore things to the previous behavior.

This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled,
but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff,
so it doesn't need an io.h.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Joachim Eastwood <joachim.eastwood@jotron.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270)
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

pxa was missed in the moving of IOMEM to a common definition, so lots of
IOMEM redefined warnings were introduced. So remove pxa IOMEM definition
and fix all the fallout.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: rtc-linux@googlegroups.com
Cc: alsa-devel@alsa-project.org

The only users of ARCH_HAS_DMA_SET_COHERENT_MASK are 2 ARM platforms:
ixp4xx and pxa cm_x2xx. We've been getting lucky that the define is
implicitly included before dma-mapping.h, but the removal of io.h broke
things (c334bc15 ARM: make mach/io.h include optional). Since memory.h
is the correct place, but no longer exists, convert the define to a
kconfig entry.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Eric Miao <eric.y.miao@gmail.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>

Drive the two Bluetooth UART output GPIOs (GPIO43_BTUART_TXD, GPIO45_BTUART_RTS)
LOW during sleep mode instead of HIGH. This reduces sleep mode battery discharge
from approximately 46 mA to approximately 30 mA.
Signed-off-by: NOliver Winker <oliver@oli1170.net>
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Now that many platforms don't need mach/io.h, remove the unused ones.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NPawel Moll <pawel.moll@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>

As part of mach/irqs.h include removal from sparse, mainstone.h was missed.
This fixes the compile of the pcmcia driver.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that most platforms don't need disable_fiq and arch_ret_to_user
macros, we can remove the empty macros or empty entry-macro.S files.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NRyan Mallon <rmallon@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>

Convert all the PXA platform socket drivers to use the new irq/gpio
management provided by soc_common.  This relieves these drivers from
having to do anything with these GPIOs other than provide the numbers
to soc_common.
Acked-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove NR_IRQS and add a per machine .nr_irqs setting.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

When this is the only content remaining in mach/system.h then the
whole file is removed.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-and-tested-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

Remove the now empty arch_reset() from all the mach/system.h includes,
and remove its callsite.  Remove arm_machine_restart() as this function
no longer does anything useful.

For samsung platforms, remove the include of mach/system-reset.h and
plat/system-reset.h from their respective mach/system.h headers as these
just define their arch_reset functions.  As a result, the s3c2410 and
plat-samsung system-reset.h files are no longer referenced, so remove
these files entirely.
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Hook these platforms restart code into the new restart hook rather
than using arch_reset().
Acked-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Even when CONFIG_MULTI_IRQ_HANDLER is selected, the core code
requires the arch_irq_handler_default macro to be defined as
a fallback.

It turns out nobody is using that particular feature as both PXA
and shmobile have all their machine descriptors populated with
the interrupt handler, leaving unused code (or empty macros) in
their entry-macro.S file just to be able to compile entry-armv.S.

Make CONFIG_MULTI_IRQ_HANDLER exclusive wrt arch_irq_handler_default,
which allows to remove one test from the hot path. Also cleanup both
PXA and shmobile entry-macro.S.

Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Tested-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Remove most gpio macros and change gpio driver to platform driver.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>

NR_BUILTIN_GPIO is both defined in arch-pxa and arch-mmp. Now replace it
with PXA_NR_BUILTIN_GPIO and MMP_NR_BUILTIN_GPIO.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>

Avoid to define gpio_to_irq() and irq_to_gpio() for potential name
confliction since multiple architecture will be built together.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>

GPIO0 and GPIO1 are linked to unique interrupt line in PXA series,
others are linked to another interrupt line. All GPIO are linked to one
interrupt line in MMP series.

Since gpio driver is shared between PXA series and MMP series, define
GPIO0 and GPIO1 as chained interrupt chip. So we can move out gpio code
from irq.c to gpio-pxa.c.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

Avoid potential naming confliction since multiple architecture will be built
in a single kernel.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

Since CONFIG_USB_GADGET_PXA27X and other macros are renamed to
CONFIG_USB_PXA27X. Update them in arch/arm/mach-pxa and arch/arm/configs
to keep consistent.

Cc: stable@kernel.org
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

A mismerge in 43872fa7 (Merge branch 'depends/rmk/gpio' into next/fixes)
causes these build errors:

In file included from arch/arm/mach-pxa/include/mach/gpio.h:30,
                 from arch/arm/include/asm/gpio.h:6,
                 from include/linux/gpio.h:31,
                 from arch/arm/mach-pxa/generic.c:20:
arch/arm/mach-pxa/include/mach/gpio-pxa.h: In function ■__gpio_is_occupied■:
arch/arm/mach-pxa/include/mach/gpio-pxa.h:121: error: invalid operands to binary >> (have ■void *■ and ■unsigned int■)
arch/arm/mach-pxa/include/mach/gpio-pxa.h:122: error: invalid operands to binary & (have ■void *■ and ■int■)
arch/arm/mach-pxa/include/mach/gpio-pxa.h:129: error: invalid operands to binary & (have ■void *■ and ■int■)

So fix them.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>