Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

When new node becomes enable by hot-add, new sysfs file must be created for
new node.  So, if new node is enabled by add_memory(), register_one_node() is
called to create it.  In addition, I386's arch_register_node() and a part of
register_nodes() of powerpc are consolidated to register_one_node() as a
generic_code().

This is tested by Tiger4(IPF) with node hot-plug emulation.
Signed-off-by: NKeiichiro Tokunaga <tokuanga.keiich@jp.fujitsu.com>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows hot-add memory which is not aligned to section.

Now, hot-added memory has to be aligned to section size.  Considering big
section sized archs, this is not useful.

When hot-added memory is registerd as iomem resoruce by iomem resource
patch, we can make use of that information to detect valid memory range.

Note: With this, not-aligned memory can be registerd. To allow hot-add
      memory with holes, we have to do more work around add_memory().
      (It doesn't allows add memory to already existing mem section.)
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Register hot-added memory to iomem_resource.  With this, /proc/iomem can
show hot-added memory.

Note: kdump uses /proc/iomem to catch memory range when it is installed.
      So, kdump should be re-installed after /proc/iomem change.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add node-hot-add support to add_memory().

node hotadd uses this sequence.
1. allocate pgdat.
2. refresh NODE_DATA()
3. call free_area_init_node() to initialize
4. create sysfs entry
5. add memory (old add_memory())
6. set node online
7. run kswapd for new node.
(8). update zonelist after pages are onlined. (This is already merged in -mm
   due to update phase is difference.)

Note:
  To make common function as much as possible,
  there is 2 changes from v2.
    - The old add_memory(), which is defiend by each archs,
      is renamed to arch_add_memory(). New add_memory becomes
      caller of arch dependent function as a common code.

    - This patch changes add_memory()'s interface
        From: add_memory(start, end)
        TO  : add_memory(nid, start, end).
      It was cause of similar code that finding node id from
      physical address is inside of old add_memory() on each arch.

      In addition, acpi memory hotplug driver can find node id easier.
      In v2, it must walk DSDT'S _CRS by matching physical address to
      get the handle of its memory device, then get _PXM and node id.
      Because input is just physical address.
      However, in v3, the acpi driver can use handle to get _PXM and node id
      for the new memory device. It can pass just node id to add_memory().

Fix interface of arch_add_memory() is in next patche.
Signed-off-by: NYasunori Goto     <y-goto@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In current code, zonelist is considered to be build once, no modification.
But MemoryHotplug can add new zone/pgdat.  It must be updated.

This patch modifies build_all_zonelists().  By this, build_all_zonelist() can
reconfig pgdat's zonelists.

To update them safety, this patch use stop_machine_run().  Other cpus don't
touch among updating them by using it.

In old version (V2 of node hotadd), kernel updated them after zone
initialization.  But present_page of its new zone is still 0, because
online_page() is not called yet at this time.  Build_zonelists() checks
present_pages to find present zone.  It was too early.  So, I changed it after
online_pages().
Signed-off-by: NYasunori Goto     <y-goto@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] wait_table and zonelist initializing for memory hotadd: add return code for init_current_empty_zone

When add_zone() is called against empty zone (not populated zone), we have to
initialize the zone which didn't initialize at boot time.  But,
init_currently_empty_zone() may fail due to allocation of wait table.  So,
this patch is to catch its error code.

Changes against wait_table is in the next patch.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Yasunori Goto <y-goto@jp.fujitsu.com>

If hot-added memory's address is smaller than old area, spanned_pages will
not be updated.  It must be fixed.

example) Old zone_start_pfn = 0x60000, and spanned_pages = 0x10000
         Added new memory's start_pfn = 0x50000, and end_pfn = 0x60000

  new spanned_pages will be still 0x10000 by old code.
  (It should be updated to 0x20000.) Because old_zone_end_pfn will be
  0x70000, and end_pfn smaller than it. So, spanned_pages will not be
  updated.

In current code, spanned_pages is updated only when end_pfn is updated.
But, it should be updated by subtraction between bigger end_pfn and new
zone_start_pfn.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on an older patch from  Mike Kravetz <kravetz@us.ibm.com>

We need to have a mem_map for high addresses in order to make fops->no_page
work on spufs mem and register files.  So far, we have used the
memory_present() function during early bootup, but that did not work when
CONFIG_NUMA was enabled.

We now use the __add_pages() function to add the mem_map when loading the
spufs module, which is a lot nicer.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When pages are onlined, not only zone->present_pages but also
pgdat->node_present_pages should be refreshed.

This parameter is used to show information at
/sys/device/system/node/nodeX/meminfo via si_meminfo_node().

So, it shows strange value for MemUsed which is calculated
(node_present_pages - all zones free pages).
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__add_section defines an unused pointer to the zones pgdat.  Remove this
definition.  This fixes a compile warning.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The calculation for node_spanned_pages at grow_pgdat_span() is clearly
wrong.  This is patch for it.

(Please see grow_zone_span() to compare. It is correct.)
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
> I found the tests does not work well with Dave's patchset.
> I've found the followings:
>
> 	- setup_per_zone_pages_min() calls should be added in
> 	   capture_page_range() and online_pages()
> 	- lru_add_drain() should be called before try_to_migrate_pages()

The following patch deals with the first item.
Signed-off-by: NIWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This basically keeps up from having to extern __kmalloc_section_memmap().

The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that
header gets hard to work with, because it needs some arch-specific macros.
Just stick it in here for now, instead of creating another header.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NLion Vollnhals <webmaster@schiggl.de>
Signed-off-by: NJiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds generic memory add/remove and supporting functions for memory
hotplug into a new file as well as a memory hotplug kernel config option.

Individual architecture patches will follow.

For now, disable memory hotplug when swsusp is enabled.  There's a lot of
churn there right now.  We'll fix it up properly once it calms down.
Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>