Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 17 10月, 2013 2 次提交
    • P
      KVM: PPC: Book3S HV: Implement timebase offset for guests · 93b0f4dc
      由 Paul Mackerras 提交于 
      This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.

Therefore this provides a new per-vcpu value accessed via the one_reg
interface using the new KVM_REG_PPC_TB_OFFSET identifier.  This value
defaults to 0 and is not modified by KVM.  On entering the guest, this
value is added onto the timebase, and on exiting the guest, it is
subtracted from the timebase.

This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register.  Writing to the TBU40 register only
alters the upper 40 bits of the timebase, leaving the lower 24 bits
unchanged.  This provides a way to modify the timebase for guest
migration without disturbing the synchronization of the timebase
registers across CPU cores.  The kernel rounds up the value given
to a multiple of 2^24.

Timebase values stored in KVM structures (struct kvm_vcpu, struct
kvmppc_vcore, etc.) are stored as host timebase values.  The timebase
values in the dispatch trace log need to be guest timebase values,
however, since that is read directly by the guest.  This moves the
setting of vcpu->arch.dec_expires on guest exit to a point after we
have restored the host timebase so that vcpu->arch.dec_expires is a
host timebase value.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      93b0f4dc
    • M
      KVM: PPC: Book3S HV: Reserve POWER8 space in get/set_one_reg · 3b783474
      由 Michael Neuling 提交于 
      This reserves space in get/set_one_reg ioctl for the extra guest state
needed for POWER8.  It doesn't implement these at all, it just reserves
them so that the ABI is defined now.

A few things to note here:

- This add *a lot* state for transactional memory.  TM suspend mode,
  this is unavoidable, you can't simply roll back all transactions and
  store only the checkpointed state.  I've added this all to
  get/set_one_reg (including GPRs) rather than creating a new ioctl
  which returns a struct kvm_regs like KVM_GET_REGS does.  This means we
  if we need to extract the TM state, we are going to need a bucket load
  of IOCTLs.  Hopefully most of the time this will not be needed as we
  can look at the MSR to see if TM is active and only grab them when
  needed.  If this becomes a bottle neck in future we can add another
  ioctl to grab all this state in one go.

- The TM state is offset by 0x80000000.

- For TM, I've done away with VMX and FP and created a single 64x128 bit
  VSX register space.

- I've left a space of 1 (at 0x9c) since Paulus needs to add a value
  which applies to POWER7 as well.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      3b783474
  3. 16 10月, 2013 1 次提交
  5. 03 10月, 2013 1 次提交
  7. 30 9月, 2013 2 次提交
    • P
      KVM: Convert kvm_lock back to non-raw spinlock · 2f303b74
      由 Paolo Bonzini 提交于 
      In commit e935b837 ("KVM: Convert kvm_lock to raw_spinlock"),
the kvm_lock was made a raw lock.  However, the kvm mmu_shrink()
function tries to grab the (non-raw) mmu_lock within the scope of
the raw locked kvm_lock being held.  This leads to the following:

BUG: sleeping function called from invalid context at kernel/rtmutex.c:659
in_atomic(): 1, irqs_disabled(): 0, pid: 55, name: kswapd0
Preemption disabled at:[<ffffffffa0376eac>] mmu_shrink+0x5c/0x1b0 [kvm]

Pid: 55, comm: kswapd0 Not tainted 3.4.34_preempt-rt
Call Trace:
 [<ffffffff8106f2ad>] __might_sleep+0xfd/0x160
 [<ffffffff817d8d64>] rt_spin_lock+0x24/0x50
 [<ffffffffa0376f3c>] mmu_shrink+0xec/0x1b0 [kvm]
 [<ffffffff8111455d>] shrink_slab+0x17d/0x3a0
 [<ffffffff81151f00>] ? mem_cgroup_iter+0x130/0x260
 [<ffffffff8111824a>] balance_pgdat+0x54a/0x730
 [<ffffffff8111fe47>] ? set_pgdat_percpu_threshold+0xa7/0xd0
 [<ffffffff811185bf>] kswapd+0x18f/0x490
 [<ffffffff81070961>] ? get_parent_ip+0x11/0x50
 [<ffffffff81061970>] ? __init_waitqueue_head+0x50/0x50
 [<ffffffff81118430>] ? balance_pgdat+0x730/0x730
 [<ffffffff81060d2b>] kthread+0xdb/0xe0
 [<ffffffff8106e122>] ? finish_task_switch+0x52/0x100
 [<ffffffff817e1e94>] kernel_thread_helper+0x4/0x10
 [<ffffffff81060c50>] ? __init_kthread_worker+0x

After the previous patch, kvm_lock need not be a raw spinlock anymore,
so change it back.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      2f303b74
    • P
      KVM: protect kvm_usage_count with its own spinlock · 4a937f96
      由 Paolo Bonzini 提交于 
      The VM list need not be protected by a raw spinlock.  Separate the
two so that kvm_lock can be made non-raw.

Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      4a937f96
  9. 25 9月, 2013 2 次提交
  11. 26 8月, 2013 1 次提交
  13. 25 7月, 2013 1 次提交
  15. 27 6月, 2013 6 次提交
  17. 19 6月, 2013 3 次提交
  19. 12 6月, 2013 1 次提交
  21. 05 6月, 2013 1 次提交
  23. 28 5月, 2013 1 次提交
  25. 02 5月, 2013 1 次提交
    • P
      KVM: PPC: Book3S: Add API for in-kernel XICS emulation · 5975a2e0
      由 Paul Mackerras 提交于 
      This adds the API for userspace to instantiate an XICS device in a VM
and connect VCPUs to it.  The API consists of a new device type for
the KVM_CREATE_DEVICE ioctl, a new capability KVM_CAP_IRQ_XICS, which
functions similarly to KVM_CAP_IRQ_MPIC, and the KVM_IRQ_LINE ioctl,
which is used to assert and deassert interrupt inputs of the XICS.

The XICS device has one attribute group, KVM_DEV_XICS_GRP_SOURCES.
Each attribute within this group corresponds to the state of one
interrupt source.  The attribute number is the same as the interrupt
source number.

This does not support irq routing or irqfd yet.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      5975a2e0
  27. 30 4月, 2013 1 次提交
  29. 29 4月, 2013 1 次提交
  31. 27 4月, 2013 9 次提交
  33. 22 3月, 2013 1 次提交
    • B
      KVM: PPC: Added one_reg interface for timer registers · 78accda4
      由 Bharat Bhushan 提交于 
      If userspace wants to change some specific bits of TSR
(timer status register) then it uses GET/SET_SREGS ioctl interface.
So the steps will be:
      i)   user-space will make get ioctl,
      ii)  change TSR in userspace
      iii) then make set ioctl.
It can happen that TSR gets changed by kernel after step i) and
before step iii).

To avoid this we have added below one_reg ioctls for oring and clearing
specific bits in TSR. This patch adds one registerface for:
     1) setting specific bit in TSR (timer status register)
     2) clearing specific bit in TSR (timer status register)
     3) setting/getting the TCR register. There are cases where we want to only
        change TCR and not TSR. Although we can uses SREGS without
        KVM_SREGS_E_UPDATE_TSR flag but I think one reg is better. I am open
        if someone feels we should use SREGS only here.
     4) getting/setting TSR register
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      78accda4
  35. 12 3月, 2013 1 次提交
  37. 08 3月, 2013 1 次提交
  39. 06 3月, 2013 1 次提交
  41. 12 2月, 2013 2 次提交