Final fixups are currently applied only at boot-time by
pci_apply_final_quirks(), which is an fs_initcall().  Hot-added devices
don't get these fixups, so they may not be completely initialized.

This patch makes us run final fixups for hot-added devices in
pci_bus_add_device() just before the new device becomes eligible for driver
binding.

This patch keeps the fs_initcall() for devices present at boot because we
do resource assignment between pci_bus_add_device and the fs_initcall(),
and we don't want to break any fixups that depend on that assignment.  This
is a design issue that may be addressed in the future -- any resource
assignment should be done *before* device_add().

[bhelgaas: changelog]
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Final fixups are executed during device enumeration.  If we support
hotplug, this may be after boot, so final fixups cannot be __init.

[bhelgaas: changelog]
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The enable/suspend/resume_early/resume fixups can be called at any time, so
they can't be __init or __devinit.

[bhelgaas: changelog]
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

__nv_msi_ht_cap_quirk() acquires a temporary reference via
'pci_get_bus_and_slot()' that is never released.

This patch releases the temporary reference.
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This patch restructures pci_do_fixups()'s quirk invocations in the style
of initcall_debug_start() and initcall_debug_report(), so we have only
one call site for the quirk.

[bhelgaas: changelog]
Signed-off-by: NMyron Stowe <myron.stowe@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Passes pci_intx_mask_supported test but continues to send interrupts
as discovered through VFIO-based device assignment.

http://www.spinics.net/lists/kvm/msg73738.html

[bhelgaas: use HEADER, not FINAL, which is currently broken for hotplug]
Tested-by: NAndreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

According to

http://thread.gmane.org/gmane.comp.emulators.kvm.devel/91388

the T310 does not properly support INTx masking as it fails to keep the
PCI_STATUS_INTERRUPT bit updated once the interrupt is masked. Mark this
adapter as broken so that pci_intx_mask_supported won't report it as
compatible.

[bhelgaas: use HEADER, not FINAL, which is currently broken for hotplug]
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

pci_intx_mask_supported() assumes INTx masking is supported if the
PCI_COMMAND_INTX_DISABLE bit is writable.  But when that bit is set,
some devices don't actually mask INTx or update PCI_STATUS_INTERRUPT
as we expect.

This patch adds a way for quirks to identify these broken devices.

[bhelgaas: split out from Chelsio quirk addition]
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In a PCI environment, transactions aren't always required to reach
the root bus before being re-routed.  Intermediate switches between
an endpoint and the root bus can redirect DMA back downstream before
things like IOMMUs have a chance to intervene.  Legacy PCI is always
susceptible to this as it operates on a shared bus.  PCIe added a
new capability to describe and control this behavior, Access Control
Services, or ACS.

The utility function pci_acs_enabled() allows us to test the ACS
capabilities of an individual devices against a set of flags while
pci_acs_path_enabled() tests a complete path from a given downstream
device up to the specified upstream device.  We also include the
ability to add device specific tests as it's likely we'll see
devices that do not implement ACS, but want to indicate support
for various capabilities in this space.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The fixups are executed once the pci-device is found which is during
boot process so __init seems fine as long as the platform does not
support hotplug.

However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

DMA transactions are tagged with the source ID of the device making
the request.  Occasionally hardware screws this up and uses the
source ID of a different device (often the wrong function number of
a multifunction device).  A specific Ricoh multifunction device is
a prime example of this problem and included in this patch.

Given a pci_dev, this function returns the pci_dev to use as the
source ID for DMA.  When hardware works correctly, this returns
the input device.  For the components of the Ricoh multifunction
device, it returns the pci_dev for function 0.

This will be used by IOMMU drivers for determining the boundaries
of IOMMU groups as multiple devices using the same source ID must
be contained within the same group.  This can also be used by
existing streaming DMA paths for the same purpose.

[bhelgaas: fold in pci_dev_get() for !CONFIG_PCI]
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

For IvyBridge Mobile platform, a system hang may occur if a FLR (Function
Level Reset) is asserted to internal graphics.

This quirk is a workaround for the IVB FLR errata issue.  We are
disabling the FLR reset handshake between the PCH and CPU display, then
manually powering down the panel power sequencing and resetting the PCH
display.
Signed-off-by: NXudong Hao <xudong.hao@intel.com>
Signed-off-by: NKay, Allen M <allen.m.kay@intel.com>
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

All supported devices have one issue that msi interrupt doesn't assert
if pci command register bit (PCI_COMMAND_INTX_DISABLE) is set.
Add workaround in drivers/pci/quirks.c
Signed-off-by: Nxiong <xiong@qca.qualcomm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Makes it a little easier to figure out which device may have caused a
slow quirk.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This isn't really a quirk; calling it directly from pci_add_device makes
more sense.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Recently added support to allow quirks to report duration also make the
boot log very crowded when initcall_debug is specified.

One thing we can to do mitigate this is to not call quirks unnecessarily
by adding a new quirk declaration macro that takes a class argument.

The new macro takes a class value and a class shift value (since it can
vary) so that quirks will be limited to certain device classes, greatly
reducing the number we call on every PCI device addition.

-v2: fix v1 that left over of sparated patch.
-v3: according to Jesse, change cls to class, cls_shift, to class_shift.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Some BIOS implementations leave the Intel GPU interrupts enabled,
even though no one is handling them (f.e. i915 driver is never loaded).
Additionally the interrupt destination is not set up properly
and the interrupt ends up -somewhere-.

These spurious interrupts are "sticky" and the kernel disables
the (shared) interrupt line after 100.000+ generated interrupts.

Fix it by disabling the still enabled interrupts.
This resolves crashes often seen on monitor unplug.

Tested on the following boards:
- Intel DH61CR: Affected
- Intel DH67BL: Affected
- Intel S1200KP server board: Affected
- Asus P8H61-M LE: Affected, but system does not crash.
  Probably the IRQ ends up somewhere unnoticed.

According to reports on the net, the Intel DH61WW board is also affected.

Many thanks to Jesse Barnes from Intel for helping
with the register configuration and to Intel in general
for providing public hardware documentation.
Signed-off-by: NThomas Jarosch <thomas.jarosch@intra2net.com>
Tested-by: NCharlie Suffin <charlie.suffin@stratus.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

While diagnosing some boot time issues on a platform, all that I
could see in the bootgraph/dmesg was that the system was spending
a lot of time in applying one or more PCI quirks... which
was virtually undebuggable.

This patch adds printk's in "initcall_debug" style to the dmesg,
which are added when the user asks for the initcall_debug
(the nr one tool to use when debugging boot hangs or boot time issues)
kernel command line option.

v2: add #includes so quirks can build on non-x86
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

They were implicitly getting it from device.h --> module.h but
we want to clean that up.  So add the minimal header for these
macros.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Intel 5000 and 5100 series memory controllers have a known issue if read
completion coalescing is enabled and the PCI-E Maximum Payload Size is
set to 256B.  To work around this issue, disable read completion
coalescing in the memory controller and root complexes.  Unfortunately,
it must always be disabled, even if no 256B MPS devices are present, due
to the possibility of one being hotplugged.

Links to erratas:
http://www.intel.com/content/dam/doc/specification-update/5000-chipset-memory-controller-hub-specification-update.pdf
http://www.intel.com/content/dam/doc/specification-update/5100-memory-controller-hub-chipset-specification-update.pdf

Thanks to Jesse Brandeburg and Ben Hutchings for providing insight into
the problem.
Tested-and-Reported-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NJon Mason <mason@myri.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Commit 15bed0f2 added a quirk for the e823 Ricoh card reader to lower the
base frequency.  However, the quirk first checks to see if the proprietary
MMC controller is disabled, and returns if so.  On some devices, such as the
Lenovo X220, the MMC controller is already disabled by firmware it seems,
but the frequency change is still needed so sdhci-pci can talk to the cards.
Since the MMC controller is disabled, the frequency fixup was never being run
on these machines.

This moves the e823 check above the MMC controller check so that it always
gets run.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Using legacy interrupts and TLPs > 256 bytes on the SFC4000 (all
revisions) may cause interrupt messages to be replayed.  In some
systems this results in a non-recoverable MCE.  Early boards using the
SFC4000 set the maximum payload size supported (MPSS) to 1024 bytes
and we should override that.

There are probably other devices with similar issues, so give this
quirk a generic name.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent
with the other IOMMU options.

Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the
irq subsystem name.

And define the CONFIG_DMAR_TABLE for the common ACPI DMAR
routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Ricoh 1180:e823 does not recognize certain types of SD/MMC cards,
as reported at http://launchpad.net/bugs/773524.  Lowering the SD
base clock frequency from 200Mhz to 50Mhz fixes this issue. This
solution was suggest by Koji Matsumuro, Ricoh Company, Ltd.

This change has no negative performance effect on standard SD
cards, though it's quite possible that there will be one on
UHS-1 cards.
Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com>
Tested-by: NDaniel Manrique <daniel.manrique@canonical.com>
Cc: Koji Matsumuro <matsumur@nts.ricoh.co.jp>
Cc: <stable@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Ball <cjb@laptop.org>

Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: NChris Ball <cjb@laptop.org>

Don't use the costly dmi_name_in_vendors() when we know the string we
are looking for can only be in the DMI board name field. This is more
robust and, more importantly, much faster.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We were just lucky that ICH4_GPIO_EN and ICH6_GPIO_EN happen to have
the same value.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

TI816X (common name for DM816x/C6A816x/AM389x family) devices configured
to boot as PCIe Endpoint have class code = 0. This makes kernel PCI bus
code to skip allocating BARs to these devices resulting into following
type of error when trying to enable them:

"Device 0000:01:00.0 not available because of resource collisions"

The device cannot be operated because of the above issue.

This patch adds a ID specific (TI VENDOR ID and 816X DEVICE ID based)
'early' fixup quirk to replace class code with
PCI_CLASS_MULTIMEDIA_VIDEO as class.
Signed-off-by: NHemant Pedanekar <hemantp@ti.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Some broken BIOSes on ICH4 chipset report an ACPI region which is in
conflict with legacy IDE ports when ACPI is disabled. Even though the
regions overlap, IDE ports are working correctly (we cannot find out
the decoding rules on chipsets).

So the only problem is the reported region itself, if we don't reserve
the region in the quirk everything works as expected.

This patch avoids reserving any quirk regions below PCIBIOS_MIN_IO
which is 0x1000. Some regions might be (and are by a fast google
query) below this border, but the only difference is that they won't
be reserved anymore. They should still work though the same as before.

The conflicts look like (1f.0 is bridge, 1f.1 is IDE ctrl):
pci 0000:00:1f.1: address space collision: [io 0x0170-0x0177] conflicts with 0000:00:1f.0 [io  0x0100-0x017f]

At 0x0100 a 128 bytes long ACPI region is reported in the quirk for
ICH4. ata_piix then fails to find disks because the IDE legacy ports
are zeroed:
ata_piix 0000:00:1f.1: device not available (can't reserve [io 0x0000-0x0007])

References: https://bugzilla.novell.com/show_bug.cgi?id=558740Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Per ICH4 and ICH6 specs, ACPI and GPIO regions are valid iff ACPI_EN
and GPIO_EN bits are set to 1. Add checks for these bits into the
quirks prior to the region creation.

While at it, name the constants by macros.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Revert commit 7eb93b17
Author: Yu Zhao <yu.zhao@intel.com>
Date:   Fri Apr 3 15:18:11 2009 +0800

    PCI: SR-IOV quirk for Intel 82576 NIC

    If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash
    BAR and program the SR-IOV BARs to use the old Flash Memory Space.

    Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet
    section 7.9.2.14.2 for details.
    http://download.intel.com/design/network/datashts/82576_Datasheet.pdfSigned-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This quirk was added before SR-IOV was in production and now all machines that
originally had this issue alreayd have bios updates to correct the issue. The
quirk itself is no longer needed and in fact causes bugs if run.  Remove it.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
CC: Yu Zhao <yu.zhao@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>