- 28 9月, 2011 1 次提交
-
-
由 Sathya Perla 提交于
This fix provides a newly flashed FW version (appended, in braces) along with the currently running FW version via ethtool. The newly flashed version runs only after a system reset. Signed-off-by: NSuresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
Use of unlikely in this place is wrong. Remove it. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 8月, 2011 3 次提交
-
-
由 Sathya Perla 提交于
The rx_drops_no_frags HW counter for RSS rings is 16bits in HW and can wraparound often. Maintain a 32-bit accumulator in the driver to prevent frequent wraparound. Also, incorporated Eric's feedback to use ACCESS_ONCE() for the accumulator write. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Get rid of adapter->pcicfg and its use. Use pci_config_read/write_dword() instead. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
There is a possibility of be_post_rx_frags() being called simultaneously from both be_worker() (when rx_post_starved) and be_poll_rx() (when rxq->used is 0). This can be avoided by posting rx buffers only when some completions have been reaped. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2011 1 次提交
-
-
由 Somnath Kotur 提交于
Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Error comes from commit ac124ff9 (be2net: cleanup and refactor stats code) ERROR: "__udivdi3" [drivers/net/benet/be2net.ko] undefined! Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Moves the Emulex driver into drivers/net/ethernet/emulex/ and make the necessary Kconfig and Makefile changes. CC: Sathya Perla <sathya.perla@emulex.com> CC: Subbu Seetharaman <subbu.seetharaman@emulex.com> CC: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 03 8月, 2011 6 次提交
-
-
由 Sathya Perla 提交于
On some BE skews, while in promiscuous mode, pkts that do not belong to a port can arrive on that port. Drop such pkts. Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Support for flashing RJ45 PHY (from Teranetics) on a 10GBaseT BE3 card. Signed-off-by: NNaresh G <bgottumukkala@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Use this cmd for both promiscous and multicast address programming. Get rid of the old MULTICAST_SET cmd. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
While configuring promiscous mode, explicitly set the VLAN_PROMISCOUS bit to make this happen. When switching off promiscous mode, re-program the vids. Signed-off-by: NXavier Selvin <xavier.selvin@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Change in the link status generates an MCC event. This is processed and netif_carrier_on/off is called accordingly. Don't need to query/store the link_status state. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
1) In be_probe(), as soon as the MCC Q is created a gratuitous link status event is received and processed. Accordingly netif_carrier_off/on() is called. The extra netif_carrier_off() call in probe can race with this and cause wrong state. 2) be_close() need not call netif_carrier_off(). It is OK to show the actual link state even when the device is administratively down. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2011 2 次提交
-
-
由 Sathya Perla 提交于
64-bit stats in be2net are written/read as follows using the stats-sync interface for safe access in 32-bit archs: 64-bit sync writer reader stats ------------------------------------------------------------------------------ tx_stats tx_stats->sync be_xmit be_get_stats64, ethtool tx-compl tx_stats->sync_compl tx-compl-processing ethtool rx-stats rx_stats->sync rx-compl-processing be_get_stats64, ethtool, eqd-update This patch is based on Stephen Hemminger's earlier patch on the same issue... Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
In preparation for 64-bit stats interface, the following cleanups help streamline the code: 1) made some more rx/tx stats stored by driver 64 bit 2) made some HW stas (err/drop counters) stored in be_drv_stats 32 bit to keep the code simple as BE provides 32-bit counters only. 3) removed duplication of netdev stats in ethtool 4) removed some un-necessary stats and fixed some names Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2011 1 次提交
-
-
由 Sathya Perla 提交于
Currently be3-native mode is requested only in probe(). It must be requested, each time the card is reset either after an EEH error or after sleep/hibernation. Also, the be_cmd_check_native_mode() is better named be_cmd_req_native_mode() Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2011 2 次提交
-
-
由 Ajit Khaparde 提交于
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If we cannot allocate new skbs in RX completion handler, we should increase netdevice rx_dropped counter, not spam console messages. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Multiple quoted strings are concatenated without comma separators. Make the arrays const while there. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2011 2 次提交
-
-
由 Sathya Perla 提交于
It may be set in the card while the driver is probed by kdump kernel after a crash. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
On some skews, the BE card sends pause frames (and not drop pkts) if there are no more posted buffers available for packet reception. This behaviour has a side effect: When an interface is disabled, buffers are no longer posted on the corresponding RX rings. All broadcast and multicast traffic being received on the port will quickly fill up the PMEM and cause pause push back. As the PMEM is shared by both the ports, all traffic being received on the other (enabled) port also gets stalled. The fix is to destroy RX rings when the interface is disabled. If there is no RX ring match in the RXF lookup, the packets are discarded and so don't hog the PMEM. The RXQ creation cmd must now use MCC instead of MBOX as they are are called post MCC queue creation. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2011 3 次提交
-
-
由 Sathya Perla 提交于
Initialization of this field to "all priorities" must be done before MCC queue creation. As soon as the MCC queue is created, an event modifying this value may be received. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Problem initially reproted and fixed by Eric Dumazet <eric.dumazet@gmail.com> netdev_stats_update() resets netdev->stats and then accumulates stats from various rings. This is wrong as stats readers can sometimes catch zero values. Use temporary variables instead for accumulating per-ring values. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 6月, 2011 1 次提交
-
-
由 Sathya Perla 提交于
This patch provides support for multiple TX queues. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 12 6月, 2011 1 次提交
-
-
由 Padmanabh Ratnakar 提交于
NETIF_F_TSO6 for VLAN packets was not enabled for BE adapters. Enabling it. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2011 1 次提交
-
-
由 Selvin Xavier 提交于
Fixed Rx pause counter for Lancer. Swapping hi and lo words. Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2011 1 次提交
-
-
由 Somnath Kotur 提交于
Instead of failing the init/probe code in the driver fallback to the older opcode to ensure the driver is loaded thereby enabling users to upgrade the f/w to whatever version is required. Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2011 1 次提交
-
-
由 Mammatha Edhala 提交于
Enable SR-IOV for Lancer Signed-off-by: NMammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2011 3 次提交
-
-
由 Shripad Nunjundarao 提交于
Added implementation of FW download feature for Lancer. Signed-off-by: NShripad Nunjundarao <shripad.nunjundarao@emulex.com> Signed-off-by: NSevin Xavier <selvin.xavier@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Selvin Xavier 提交于
Added Lancer stats implementation. Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Added support to get version 1 of the stats for BE3. Use old stats command for BE2. Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2011 3 次提交
-
-
由 Padmanabh Ratnakar 提交于
Start/stop TX queue is controlled by TX queue "used" counter. It is incremented while WRBs are posted to TX queue and decremented when TX completions are received. This counter was getting decremented before HW is informed about processing of TX completions. As used counter is decremented, transmit function posts new WRBs and creates completion queue full scenario in HW. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Use OPCODE_COMMON_NTWK_RX_FILTER command for promiscous mode as OPCODE_ETH_PROMISCUOUS command is getting deprecated. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
In Lancer if a frame is DMAed partially due to lack of RX buffers, an error completion is sent with packet size as zero and num_recvd indicating number of used buffers. These buffers need to be freed and packet dropped. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-