Currently, the callback server is listening on IPv6 if it is enabled. This
means that IPv4 addresses will always be mapped.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the client is not using a delegation, the right thing to do is to return
it as soon as possible. This helps reduce the amount of state the server
has to track, as well as reducing the potential for conflicts with other
clients.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Reuse the state management thread in order to return delegations when we
get a callback.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Let the actual delegreturn stuff be run in the state manager thread rather
than allocating a separate kthread.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We really shouldn't be resetting the sequence ids when doing state
expiration recovery, since we don't know if the server still remembers our
previous state owners. There are servers out there that do attempt to
preserve client state even if the lease has expired. Such a server would
only release that state if a conflicting OPEN request occurs.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix up a potential race...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It is really a more general purpose state management thread at this point.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a delegation cleanup phase to the state management loop, and do the
NFS4ERR_CB_PATH_DOWN recovery there.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a flag to mark delegations as requiring return, then run a garbage
collector. In the future, this will allow for more flexible delegation
management, where delegations may be marked for return if it turns out
that they are not being referenced.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4 defines a number of state errors which the client does not currently
handle. Among those we should worry about are:
  NFS4ERR_ADMIN_REVOKED - the server's administrator revoked our locks
  			  and/or delegations.
  NFS4ERR_BAD_STATEID - the client and server are out of sync, possibly
                        due to a delegation return racing with an OPEN
			request.
  NFS4ERR_OPENMODE - the client attempted to do something not sanctioned
  		     by the open mode of the stateid. Should normally just
		     occur as a result of a delegation return race.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that we're using the flags to indicate state that needs to be
recovered, as well as having implemented proper refcounting and spinlocking
on the state and open_owners, we can get rid of nfs_client->cl_sem. The
only remaining case that was dubious was the file locking, and that case is
now covered by the nfsi->rwsem.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The unlock path is currently failing to take the nfs_client->cl_sem read
lock, and hence the recovery path may see locks disappear from underneath
it.
Also ensure that it takes the nfs_inode->rwsem read lock so that it there
is no conflict with delegation recalls.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and move some code around in order to clear out an unnecessary
forward declaration.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of doing a full setclientid, try doing a RENEW call first.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the client for some reason is not able to recover all its state within
the time allotted for the grace period, and the server reboots again, the
client is not allowed to recover the state that was 'lost' using reboot
recovery.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ditto for nfs4_get_setclientid_cred().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Without an extra lock, we cannot just assume that the delegation->inode is
valid when we're traversing the rcu-protected nfs_client lists. Use the
delegation->lock to ensure that it is truly valid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When we can update_open_stateid(), we need to be certain that we don't
race with a delegation return. While we could do this by grabbing the
nfs_client->cl_lock, a dedicated spin lock in the delegation structure
will scale better.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the admin has specified the "noresvport" option for an NFS mount
point, the kernel's NFS client uses an unprivileged source port for
the main NFS transport.  The kernel's lockd client should use an
unprivileged port in this case as well.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the admin has specified the "noresvport" option for an NFS mount
point, the kernel's NFS client uses an unprivileged source port for
the main NFS transport.  The kernel's mountd client should use an
unprivileged port in this case as well.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The standard default security setting for NFS is AUTH_SYS.  An NFS
client connects to NFS servers via a privileged source port and a
fixed standard destination port (2049).  The client sends raw uid and
gid numbers to identify users making NFS requests, and the server
assumes an appropriate authority on the client has vetted these
values because the source port is privileged.

On Linux, by default in-kernel RPC services use a privileged port in
the range between 650 and 1023 to avoid using source ports of well-
known IP services.  Using such a small range limits the number of NFS
mount points and the number of unique NFS servers to which a client
can connect concurrently.

An NFS client can use unprivileged source ports to expand the range of
source port numbers, allowing more concurrent server connections and
more NFS mount points.  Servers must explicitly allow NFS connections
from unprivileged ports for this to work.

In the past, bumping the value of the sunrpc.max_resvport sysctl on
the client would permit the NFS client to use unprivileged ports.
Bumping this setting also changes the maximum port number used by
other in-kernel RPC services, some of which still required a port
number less than 1023.

This is exacerbated by the way source port numbers are chosen by the
Linux RPC client, which starts at the top of the range and works
downwards.  It means that bumping the maximum means all RPC services
requesting a source port will likely get an unprivileged port instead
of a privileged one.

Changing this setting effects all NFS mount points on a client.  A
sysadmin could not selectively choose which mount points would use
non-privileged ports and which could not.

Lastly, this mechanism of expanding the limit on the number of NFS
mount points was entirely undocumented.

To address the need for the NFS client to use a large range of source
ports without interfering with the activity of other in-kernel RPC
services, we introduce a new NFS mount option.  This option explicitly
tells only the NFS client to use a non-privileged source port when
communicating with the NFS server for one specific mount point.

This new mount option is called "resvport," like the similar NFS mount
option on FreeBSD and Mac OS X.  A sister patch for nfs-utils will be
submitted that documents this new option in nfs(5).

The default setting for this new mount option requires the NFS client
to use a privileged port, as before.  Explicitly specifying the
"noresvport" mount option allows the NFS client to use an unprivileged
source port for this mount point when connecting to the NFS server
port.

This mount option is supported only for text-based NFS mounts.

[ Sidebar: it is widely known that security mechanisms based on the
  use of privileged source ports are ineffective.  However, the NFS
  client can combine the use of unprivileged ports with the use of
  secure authentication mechanisms, such as Kerberos.  This allows a
  large number of connections and mount points while ensuring a useful
  level of security.

  Eventually we may change the default setting for this option
  depending on the security flavor used for the mount.  For example,
  if the mount is using only AUTH_SYS, then the default setting will
  be "resvport;" if the mount is using a strong security flavor such
  as krb5, the default setting will be "noresvport." ]
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
[Trond.Myklebust@netapp.com: Fixed a bug whereby nfs4_init_client()
was being called with incorrect arguments.]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make it possible for the NFSv4 mount set up logic to pass mount option
flags down the stack to nfs_create_rpc_client().

This is immediately useful if we want NFS mount options to modulate
settings of the underlying RPC transport, but it may be useful at some
later point if other parts of the NFSv4 mount initialization logic
want to know what the mount options are.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nfs_create_rpc_client() function sets up an RPC client for an NFS
mount point.  Add an option that allows it to set up an RPC transport
from an unprivileged port.

Instead of having nfs_create_rpc_client()'s callers retain local
knowledge about how to set up an RPC client, create a couple of flag
arguments to control the use of RPC_CLNT_CREATE flags.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: convert nfs_mount() to take a single data structure argument to make
it simpler to add more arguments.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up:  The nfs_mount() function is not to be used outside of the
NFS client.  Move its public declaration to fs/nfs/internal.h.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: I'm about to move the declaration of nfs_mount into
fs/nfs/internal.h and include it in fs/nfs/nfsroot.c.  There's a
conflicting definition of nfs_path in fs/nfs/internal.h and
fs/nfs/nfsroot.c, so rename the private one.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

My understanding is that there is a push to turn the kernel_thread
interface into a non-exported symbol and move all kernel threads to use
the kthread API. This patch changes lockd to use kthread_run to spawn
the reclaimer thread.

I've made the assumption here that the extra module references taken
when we spawn this thread are unnecessary and removed them. I've also
added a KERN_ERR printk that pops if the thread can't be spawned to warn
the admin that the locks won't be reclaimed.

In the future, it would be nice to be able to notify userspace that
locks have been lost (probably by implementing SIGLOST), and adding some
good policies about how long we should reattempt to reclaim the locks.

Finally, I removed a comment about memory leaks that I believe is
obsolete and added a new one to clarify the result of sending a SIGKILL
to the reclaimer thread. As best I can tell, doing so doesn't actually
cause a memory leak.

I consider this patch 2.6.29 material.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Again, this has never been intended as a public abi for out-of-tree
modules.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We've never considered the sunrpc code as part of any ABI to be used by
out-of-tree modules.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Somehow, this escaped the previous purge. There should be no need to keep
any extra locks in the XDR callbacks.

The NFS client XDR code only writes into private objects, whereas all reads
of shared objects are confined to fields that do not change, such as
filehandles...

Ditto for lockd, the NFSv2/v3 client mount code, and rpcbind.

The nfsd XDR code may require the BKL, but since it does a synchronous RPC
call from a thread that already holds the lock, that issue is moot.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

aops->readpages() and its NFS helper readpage_async_filler() will only
be called to do readahead I/O for newly allocated pages. So it's not
necessary to test for the always 0 dirty/uptodate page flags.

The removal of nfs_wb_page() call also fixes a readahead bug: the NFS
readahead has been synchronous since 2.6.23, because that call will
clear PG_readahead, which is the reminder for asynchronous readahead.

More background: the PG_readahead page flag is shared with PG_reclaim,
one for read path and the other for write path. clear_page_dirty_for_io()
unconditionally clears PG_readahead to prevent possible readahead residuals,
assuming itself to be always called in the write path. However, NFS is one
and the only exception in that it _always_ calls clear_page_dirty_for_io()
in the read path, i.e. for readpages()/readpage().

Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW

commit 2d42244a (clocksource:
introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only
available to read out the raw not NTP adjusted system time.

The above commit did not prevent that a posix timer can be created
with that clockid. The timer_create() syscall succeeds and initializes
the timer to a non existing hrtimer base. When the timer is deleted
either by timer_delete() or by the exit() cleanup the kernel crashes.

Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the
posix clock function to no_timer_create which returns an error code.
Reported-and-tested-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: change simple_strtol to simple_strtoul
  9p: convert d_iname references to d_name.name
  9p: Remove potentially bad parameter from function entry debug print.