Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 28 1月, 2015 1 次提交
    • P
      perf: Tighten (and fix) the grouping condition · c3c87e77
      由 Peter Zijlstra 提交于 
      The fix from 9fc81d87 ("perf: Fix events installation during
moving group") was incomplete in that it failed to recognise that
creating a group with events for different CPUs is semantically
broken -- they cannot be co-scheduled.

Furthermore, it leads to real breakage where, when we create an event
for CPU Y and then migrate it to form a group on CPU X, the code gets
confused where the counter is programmed -- triggered in practice
as well by me via the perf fuzzer.

Fix this by tightening the rules for creating groups. Only allow
grouping of counters that can be co-scheduled in the same context.
This means for the same task and/or the same cpu.

Fixes: 9fc81d87 ("perf: Fix events installation during moving group")
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c3c87e77
  3. 14 1月, 2015 1 次提交
    • P
      perf: Avoid horrible stack usage · 86038c5e
      由 Peter Zijlstra (Intel) 提交于 
      Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.

The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.

Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.

This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.

Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.

We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).

One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      86038c5e
  5. 09 1月, 2015 1 次提交
  7. 11 12月, 2014 1 次提交
    • J
      perf: Fix events installation during moving group · 9fc81d87
      由 Jiri Olsa 提交于 
      We allow PMU driver to change the cpu on which the event
should be installed to. This happened in patch:

  e2d37cd2 ("perf: Allow the PMU driver to choose the CPU on which to install events")

This patch also forces all the group members to follow
the currently opened events cpu if the group happened
to be moved.

This and the change of event->cpu in perf_install_in_context()
function introduced in:

  0cda4c02 ("perf: Introduce perf_pmu_migrate_context()")

forces group members to change their event->cpu,
if the currently-opened-event's PMU changed the cpu
and there is a group move.

Above behaviour causes problem for breakpoint events,
which uses event->cpu to touch cpu specific data for
breakpoints accounting. By changing event->cpu, some
breakpoints slots were wrongly accounted for given
cpu.

Vinces's perf fuzzer hit this issue and caused following
WARN on my setup:

   WARNING: CPU: 0 PID: 20214 at arch/x86/kernel/hw_breakpoint.c:119 arch_install_hw_breakpoint+0x142/0x150()
   Can't find any breakpoint slot
   [...]

This patch changes the group moving code to keep the event's
original cpu.
Reported-by: NVince Weaver <vince@deater.net>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1418243031-20367-3-git-send-email-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      9fc81d87
  9. 20 11月, 2014 1 次提交
  11. 16 11月, 2014 3 次提交
  13. 28 10月, 2014 1 次提交
    • P
      perf: Fix and clean up initialization of pmu::event_idx · c719f560
      由 Peter Zijlstra 提交于 
      Andy reported that the current state of event_idx is rather confused.
So remove all but the x86_pmu implementation and change the default to
return 0 (the safe option).
Reported-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Himangi Saraogi <himangi774@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sukadev@linux.vnet.ibm.com <sukadev@linux.vnet.ibm.com>
Cc: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux390@de.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      c719f560
  15. 03 10月, 2014 3 次提交
  17. 24 9月, 2014 3 次提交
  19. 19 9月, 2014 1 次提交
  21. 16 9月, 2014 1 次提交
  23. 09 9月, 2014 2 次提交
  25. 27 8月, 2014 1 次提交
  27. 24 8月, 2014 2 次提交
  29. 20 8月, 2014 1 次提交
  31. 13 8月, 2014 3 次提交
  33. 16 7月, 2014 3 次提交
    • J
      perf: Add vm_ops->name call for mmap event name retrieval · fbe26abe
      由 Jiri Olsa 提交于 
      The following patch added another way to get mmap name: 78d683e8
("mm, fs: Add vm_ops->name as an alternative to arch_vma_name")

The vdso vma mapping already switch to this and we no longer get vdso
name via arch_vma_name function. Adding this way to the perf mmap
event name retrieval code.

Caught this via perf test:

  $ sudo ./perf test -v 7
   7: Validate PERF_RECORD_* events & perf_sample fields     :
  --- start ---

SNIP

  PERF_RECORD_MMAP for [vdso] missing!
  test child finished with 255
  ---- end ----
  Validate PERF_RECORD_* events & perf_sample fields: FAILED!
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1405353439-14211-1-git-send-email-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      fbe26abe
    • P
      perf: Fix lockdep warning on process exit · 4a1c0f26
      由 Peter Zijlstra 提交于 
      Sasha Levin reported:

> While fuzzing with trinity inside a KVM tools guest running the latest -next
> kernel I've stumbled on the following spew:
>
> ======================================================
> [ INFO: possible circular locking dependency detected ]
> 3.15.0-next-20140613-sasha-00026-g6dd125d-dirty #654 Not tainted
> -------------------------------------------------------
> trinity-c578/9725 is trying to acquire lock:
> (&(&pool->lock)->rlock){-.-...}, at: __queue_work (kernel/workqueue.c:1346)
>
> but task is already holding lock:
> (&ctx->lock){-.....}, at: perf_event_exit_task (kernel/events/core.c:7471 kernel/events/core.c:7533)
>
> which lock already depends on the new lock.

> 1 lock held by trinity-c578/9725:
> #0: (&ctx->lock){-.....}, at: perf_event_exit_task (kernel/events/core.c:7471 kernel/events/core.c:7533)
>
>  Call Trace:
>  dump_stack (lib/dump_stack.c:52)
>  print_circular_bug (kernel/locking/lockdep.c:1216)
>  __lock_acquire (kernel/locking/lockdep.c:1840 kernel/locking/lockdep.c:1945 kernel/locking/lockdep.c:2131 kernel/locking/lockdep.c:3182)
>  lock_acquire (./arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602)
>  _raw_spin_lock (include/linux/spinlock_api_smp.h:143 kernel/locking/spinlock.c:151)
>  __queue_work (kernel/workqueue.c:1346)
>  queue_work_on (kernel/workqueue.c:1424)
>  free_object (lib/debugobjects.c:209)
>  __debug_check_no_obj_freed (lib/debugobjects.c:715)
>  debug_check_no_obj_freed (lib/debugobjects.c:727)
>  kmem_cache_free (mm/slub.c:2683 mm/slub.c:2711)
>  free_task (kernel/fork.c:221)
>  __put_task_struct (kernel/fork.c:250)
>  put_ctx (include/linux/sched.h:1855 kernel/events/core.c:898)
>  perf_event_exit_task (kernel/events/core.c:907 kernel/events/core.c:7478 kernel/events/core.c:7533)
>  do_exit (kernel/exit.c:766)
>  do_group_exit (kernel/exit.c:884)
>  get_signal_to_deliver (kernel/signal.c:2347)
>  do_signal (arch/x86/kernel/signal.c:698)
>  do_notify_resume (arch/x86/kernel/signal.c:751)
>  int_signal (arch/x86/kernel/entry_64.S:600)

Urgh.. so the only way I can make that happen is through:

  perf_event_exit_task_context()
    raw_spin_lock(&child_ctx->lock);
    unclone_ctx(child_ctx)
      put_ctx(ctx->parent_ctx);
    raw_spin_unlock_irqrestore(&child_ctx->lock);

And we can avoid this by doing the change below.

I can't immediately see how this changed recently, but given that you
say it's easy to reproduce, lets fix this.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140623141242.GB19860@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      4a1c0f26
    • P
      perf: Revert ("perf: Always destroy groups on exit") · 1903d50c
      由 Peter Zijlstra 提交于 
      Vince reported that commit 15a2d4de ("perf: Always destroy groups
on exit") causes a regression with grouped events. In particular his
read_group_attached.c test fails.

  https://github.com/deater/perf_event_tests/blob/master/tests/bugs/read_group_attached.c

Because of the context switch optimization in
perf_event_context_sched_out() the 'original' event may end up in the
child process and when that exits the change in the patch in question
destroys the actual grouping.

Therefore revert that change and only destroy inherited groups.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-zedy3uktcp753q8fw8dagx7a@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1903d50c
  35. 05 7月, 2014 1 次提交
  37. 02 7月, 2014 1 次提交
    • J
      perf: Do not allow optimized switch for non-cloned events · 1f9a7268
      由 Jiri Olsa 提交于 
      The context check in perf_event_context_sched_out allows
non-cloned context to be part of the optimized schedule
out switch.

This could move non-cloned context into another workload
child. Once this child exits, the context is closed and
leaves all original (parent) events in closed state.

Any other new cloned event will have closed state and not
measure anything. And probably causing other odd bugs.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1403598026-2310-2-git-send-email-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1f9a7268
  39. 09 6月, 2014 2 次提交
  41. 06 6月, 2014 2 次提交
    • A
      perf: Differentiate exec() and non-exec() comm events · 82b89778
      由 Adrian Hunter 提交于 
      perf tools like 'perf report' can aggregate samples by comm strings,
which generally works.  However, there are other potential use-cases.
For example, to pair up 'calls' with 'returns' accurately (from branch
events like Intel BTS) it is necessary to identify whether the process
has exec'd.  Although a comm event is generated when an 'exec' happens
it is also generated whenever the comm string is changed on a whim
(e.g. by prctl PR_SET_NAME).  This patch adds a flag to the comm event
to differentiate one case from the other.

In order to determine whether the kernel supports the new flag, a
selection bit named 'exec' is added to struct perf_event_attr.  The
bit does nothing but will cause perf_event_open() to fail if the bit
is set on kernels that do not have it defined.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/537D9EBE.7030806@intel.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      82b89778
    • P
      perf: Fix perf_event_comm() vs. exec() assumption · e041e328
      由 Peter Zijlstra 提交于 
      perf_event_comm() assumes that set_task_comm() is only called on
exec(), and in particular that its only called on current.

Neither are true, as Dave reported a WARN triggered by set_task_comm()
being called on !current.

Separate the exec() hook from the comm hook.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20140521153219.GH5226@laptop.programming.kicks-ass.net
[ Build fix. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      e041e328
  43. 05 6月, 2014 2 次提交
  45. 19 5月, 2014 3 次提交
    • B
      perf/events/core: Drop unused variable after cleanup · 12665b35
      由 Borislav Petkov 提交于 
      ... in 3a497f48 ("perf: Simplify perf_event_exit_task_context()")
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1399720259-28275-1-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      12665b35
    • P
      perf: Fix a race between ring_buffer_detach() and ring_buffer_attach() · b69cf536
      由 Peter Zijlstra 提交于 
      Alexander noticed that we use RCU iteration on rb->event_list but do
not use list_{add,del}_rcu() to add,remove entries to that list, nor
do we observe proper grace periods when re-using the entries.

Merge ring_buffer_detach() into ring_buffer_attach() such that
attaching to the NULL buffer is detaching.

Furthermore, ensure that between any 'detach' and 'attach' of the same
event we observe the required grace period, but only when strictly
required. In effect this means that only ioctl(.request =
PERF_EVENT_IOC_SET_OUTPUT) will wait for a grace period, while the
normal initial attach and final detach will not be delayed.

This patch should, I think, do the right thing under all
circumstances, the 'normal' cases all should never see the extra grace
period, but the two cases:

 1) PERF_EVENT_IOC_SET_OUTPUT on an event which already has a
    ring_buffer set, will now observe the required grace period between
    removing itself from the old and attaching itself to the new buffer.

    This case is 'simple' in that both buffers are present in
    perf_event_set_output() one could think an unconditional
    synchronize_rcu() would be sufficient; however...

 2) an event that has a buffer attached, the buffer is destroyed
    (munmap) and then the event is attached to a new/different buffer
    using PERF_EVENT_IOC_SET_OUTPUT.

    This case is more complex because the buffer destruction does:
      ring_buffer_attach(.rb = NULL)
    followed by the ioctl() doing:
      ring_buffer_attach(.rb = foo);

    and we still need to observe the grace period between these two
    calls due to us reusing the event->rb_entry list_head.

In order to make 2 happen we use Paul's latest cond_synchronize_rcu()
call.

Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Reported-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507123526.GD13658@twins.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      b69cf536
    • J
      perf: Prevent false warning in perf_swevent_add · 39af6b16
      由 Jiri Olsa 提交于 
      The perf cpu offline callback takes down all cpu context
events and releases swhash->swevent_hlist.

This could race with task context software event being just
scheduled on this cpu via perf_swevent_add while cpu hotplug
code already cleaned up event's data.

The race happens in the gap between the cpu notifier code
and the cpu being actually taken down. Note that only cpu
ctx events are terminated in the perf cpu hotplug code.

It's easily reproduced with:
  $ perf record -e faults perf bench sched pipe

while putting one of the cpus offline:
  # echo 0 > /sys/devices/system/cpu/cpu1/online

Console emits following warning:
  WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0()
  Modules linked in:
  CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G        W    3.14.0+ #256
  Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008
   0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005
   0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046
   ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001
  Call Trace:
   [<ffffffff81665a23>] dump_stack+0x4f/0x7c
   [<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0
   [<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20
   [<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0
   [<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0
   [<ffffffff8111646a>] group_sched_in+0x6a/0x1f0
   [<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0
   [<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450
   [<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0
   [<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0
   [<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460
   [<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30
   [<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100
   [<ffffffff8166a7de>] __schedule+0x30e/0xad0
   [<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560
   [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
   [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
   [<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70
   [<ffffffff816707f0>] retint_kernel+0x20/0x30
   [<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90
   [<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67
   [<ffffffff81679321>] ? sysret_check+0x5/0x56

Fixing this by tracking the cpu hotplug state and displaying
the WARN only if current cpu is initialized properly.

Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1396861448-10097-1-git-send-email-jolsa@redhat.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      39af6b16