- 09 10月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
The tsn map currently use is 4K large and is stuck inside the sctp_association structure making memory references REALLY expensive. What we really need is at most 4K worth of bits so the biggest map we would have is 512 bytes. Also, the map is only really usefull when we have gaps to store and report. As such, starting with minimal map of say 32 TSNs (bits) should be enough for normal low-loss operations. We can grow the map by some multiple of 32 along with some extra room any time we receive the TSN which would put us outside of the map boundry. As we close gaps, we can shift the map to rebase it on the latest TSN we've seen. This saves 4088 bytes per association just in the map alone along savings from the now unnecessary structure members. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
If we don't have the buffer space or memory allocations fail, the data chunk is dropped, but TSN is still reported as received. This introduced a data loss that can't be recovered. We should only mark TSNs are received after memory allocations finish. The one exception is the invalid stream identifier, but that's due to user error and is reported back to the user. This was noticed by Michael Tuexen. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
Fix 3 warnings about discarding const qualifiers: net/sctp/ulpevent.c:862: warning: passing argument 1 of 'sctp_event2skb' discards qualifiers from pointer target type net/sctp/sm_statefuns.c:4393: warning: passing argument 1 of 'SCTP_ASOC' discards qualifiers from pointer target type net/sctp/socket.c:5874: warning: passing argument 1 of 'cmsg_nxthdr' discards qualifiers from pointer target type Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
sctp_assoc_change notification may contain the data from a received ABORT chunk. Set the length correctly to account for that. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 05 2月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
I was notified by Randy Stewart that lksctp claims to be "the reference implementation". First of all, "the refrence implementation" was the original implementation of SCTP in usersapce written ty Randy and a few others. Second, after looking at the definiton of 'reference implementation', we don't really meet the requirements. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 29 1月, 2008 1 次提交
-
-
由 Hideo Aoki 提交于
This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: NTakahiro Yasui <tyasui@redhat.com> Signed-off-by: NHideo Aoki <haoki@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
The even should be called SCTP_AUTHENTICATION_INDICATION. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
Add SCTP-AUTH API. The API implemented here was agreed to between implementors at the 9th SCTP Interop. It will be documented in the next revision of the SCTP socket API spec. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
This patch introduces autotuning to the sctp buffer management code similar to the TCP. The buffer space can be grown if the advertised receive window still has room. This might happen if small message sizes are used, which is common in telecom environmens. New tunables are introduced that provide limits to buffer growth and memory pressure is entered if to much buffer spaces is used. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2007 1 次提交
-
-
由 Vlad Yasevich 提交于
The socket API draft is unclear about whether to include the chunk header or not. Recent discussion on the sctp implementors mailing list clarified that the chunk header shouldn't be included, but the error parameter header still needs to be there. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 1 次提交
-
-
由 Vlad Yasevich 提交于
As stated in the sctp socket api draft: sac_info: variable If the sac_state is SCTP_COMM_LOST and an ABORT chunk was received for this association, sac_info[] contains the complete ABORT chunk as defined in the SCTP specification RFC2960 [RFC2960] section 3.3.7. We now save received ABORT chunks into the sac_info field and pass that to the user. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2006 1 次提交
-
-
由 Ivan Skytte Jorgensen 提交于
Signed-off-by: NIvan Skytte Jorgensen <isj-sctp@i1.dk> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2006 1 次提交
-
-
由 Ivan Skytte Jorgensen 提交于
Signed-off-by: NIvan Skytte Jorgensen <isj-sctp@i1.dk> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2006 1 次提交
-
-
由 Vlad Yasevich 提交于
When doing receiver buffer accounting, we always used skb->truesize. This is problematic when processing bundled DATA chunks because for every DATA chunk that could be small part of one large skb, we would charge the size of the entire skb. The new approach is to store the size of the DATA chunk we are accounting for in the sctp_ulpevent structure and use that stored value for accounting. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2006 1 次提交
-
-
由 Tsutomu Fujii 提交于
Right now, every time we increase our rwnd by more then MTU bytes, we trigger a SACK. When processing large messages, this will generate a SACK for almost every other SCTP fragment. However since we are freeing the entire message at the same time, we might as well collapse the SACK generation to 1. Signed-off-by: NTsutomu Fujii <t-fujii@nb.jp.nec.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2005 1 次提交
-
-
由 Neil Horman 提交于
Also introduces a sysctl option to configure the receive buffer accounting policy to be either at socket or association level. Default is all the associations on the same socket share the receive buffer. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2005 1 次提交
-
-
由 Ivan Skytte Jorgensen 提交于
Rename SCTP specific control message flags to use SCTP_ prefix rather than MSG_ prefix as per the latest sctp sockets API draft. Signed-off-by: NIvan Skytte Jorgensen <isj-sctp@i1.dk> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
-
- 09 10月, 2005 1 次提交
-
-
由 Al Viro 提交于
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 7月, 2005 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-